Sumiko Olympia (SG_B07DD3RNRQ_US)

Sumiko Olympia Moving Magnet Phono Cartridge User Manual

Model: Olympia (SG_B07DD3RNRQ_US)

Introduction

Thank you for choosing the Sumiko Olympia Moving Magnet Phono Cartridge. This manual provides essential information for the proper setup, operation, and maintenance of your new phono cartridge to ensure optimal performance and longevity. The Olympia cartridge is designed for high-fidelity audio reproduction from vinyl records, featuring a moving magnet architecture compatible with a wide range of phono stages.

For further assistance or detailed technical specifications, please refer to the support section or visit the official Sumiko website.

Safety Information

  • Always handle the cartridge with care to avoid damage to the stylus.
  • Keep the cartridge away from strong magnetic fields, which can affect its performance.
  • Ensure your turntable is powered off and unplugged before installing or removing the cartridge.
  • Store the cartridge in its protective packaging when not in use.

Package Contents

Verify that all items are present in the package:

  • Sumiko Olympia Moving Magnet Phono Cartridge
  • Stylus guard
  • Mounting hardware (screws, nuts, washers)
  • User Manual (this document)

Setup and Installation

Proper installation is crucial for optimal sound quality. If you are unsure about any step, consult a qualified technician or your turntable's manual.

1. Unpacking and Inspection

Carefully remove the cartridge from its packaging. Inspect it for any visible damage. Ensure the stylus guard is in place during handling.

Sumiko Olympia Phono Cartridge with green stylus guard

Image: The Sumiko Olympia Moving Magnet Phono Cartridge, black body with a distinctive green stylus guard, viewed from an angle showing the "Olympia" and "SUMIKO" branding.

2. Mounting the Cartridge

  1. Ensure your turntable's tonearm is securely locked or rested.
  2. Carefully remove the stylus guard.
  3. Attach the cartridge to the headshell using the provided mounting hardware. Do not overtighten the screws initially.
  4. Connect the tonearm wires to the corresponding pins on the cartridge. The standard color coding is:
    • Red: Right Channel Hot (R+)
    • Green: Right Channel Ground (R-)
    • White: Left Channel Hot (L+)
    • Blue: Left Channel Ground (L-)

3. Alignment and Tracking Force

Accurate alignment and tracking force are critical for sound quality and record/stylus longevity. Refer to your turntable's manual for specific instructions on tonearm setup.

  • Tracking Force: The recommended tracking force for the Sumiko Olympia is typically between 1.8 and 2.2 grams. Start with 2.0 grams and adjust slightly for optimal performance.
  • Azimuth: Ensure the cartridge body is parallel to the record surface when viewed from the front.
  • VTA (Vertical Tracking Angle): Adjust the tonearm height so that the tonearm is parallel to the record surface.
  • Anti-Skate: Set the anti-skate mechanism according to your turntable's instructions, usually matching the tracking force.
Sumiko Olympia Phono Cartridge playing a vinyl record

Image: The Sumiko Olympia Phono Cartridge mounted on a tonearm, with its stylus tracking the grooves of a spinning vinyl record, illustrating proper setup.

Operating Instructions

Once installed and aligned, operating your Sumiko Olympia cartridge is straightforward.

  1. Power On: Turn on your turntable and phono preamplifier.
  2. Place Record: Carefully place a clean vinyl record on the turntable platter.
  3. Lower Tonearm: Using the tonearm lift lever, gently lower the stylus onto the lead-in groove of the record. Avoid dropping the tonearm directly onto the record.
  4. Playback: Enjoy your music.
  5. End of Playback: At the end of the record, use the tonearm lift lever to raise the tonearm and return it to its rest.

Maintenance and Care

Regular maintenance ensures the longevity and performance of your cartridge.

  • Stylus Cleaning: Clean the stylus regularly using a soft brush designed for stylus cleaning, brushing gently from back to front. Never brush from side to side or front to back.
  • Record Cleaning: Always play clean records. Dust and debris on records can accumulate on the stylus and degrade sound quality.
  • Stylus Guard: Always replace the stylus guard when the turntable is not in use or when moving the turntable.
  • Stylus Replacement: The stylus is a consumable part and will wear out over time. The Olympia cartridge allows for stylus upgrades, such as to the RS Moonstone stylus. Consult a Sumiko dealer for replacement options.
Close-up of Sumiko Olympia Phono Cartridge stylus

Image: A close-up view of the Sumiko Olympia Phono Cartridge, highlighting the stylus assembly and its connection points, emphasizing the delicate nature of the component.

Troubleshooting

If you encounter issues, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No Sound or Low VolumeIncorrect wiring; Phono stage not selected; Amplifier input incorrect.Check cartridge wiring connections. Ensure phono input is selected on your amplifier/receiver. Verify phono preamplifier is connected and powered.
Distorted SoundIncorrect tracking force; Misaligned cartridge; Dirty stylus/record; Worn stylus.Adjust tracking force. Re-align cartridge. Clean stylus and record. Consider stylus replacement.
Hum or BuzzGrounding issue; Proximity to electrical interference.Ensure turntable and phono stage are properly grounded. Move components away from power supplies or other electronics.
Skipping or JumpingIncorrect tracking force; Damaged record; Tonearm balance issue.Adjust tracking force. Inspect record for damage. Re-balance tonearm.

Specifications

Key technical specifications for the Sumiko Olympia Moving Magnet Phono Cartridge:

  • Cartridge Type: Moving Magnet
  • Stylus: Elliptical (upgradeable to RS Moonstone)
  • Wire Material: Copper
  • Recommended Tracking Force: 1.8 - 2.2 grams (nominal 2.0g)
  • Weight: Approximately 1.76 ounces (50 grams)
  • Dimensions: Approximately 2.2 x 2.5 x 5 inches
  • Model Name: Olympia
  • Item Model Number: SG_B07DD3RNRQ_US
  • UPC: 844682008233

Note: Some specifications may vary slightly. For the most current and detailed specifications, please refer to the official Sumiko product page.

Warranty Information

Sumiko products are manufactured to high standards and are backed by a limited warranty. Specific warranty terms and conditions may vary by region and retailer. Please retain your proof of purchase for warranty claims.

The warranty typically covers manufacturing defects but does not cover wear and tear of consumable parts like the stylus, or damage caused by improper installation, misuse, or accidents.

For detailed warranty information, please visit the official Sumiko website or contact your authorized dealer.

Customer Support

If you require further assistance, technical support, or have questions regarding your Sumiko Olympia cartridge, please contact:

  • Your authorized Sumiko dealer or retailer.
  • The official Sumiko website for contact information and FAQs: sumikousa.com

When contacting support, please have your product model (Olympia) and purchase information ready.

© 2023 Sumiko. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.