Product Overview
The MXR IEC 320 C14 Panel Mount Power Connector Socket is designed for reliable power connections in various electronic devices. This product provides a secure and standardized inlet for AC power, ensuring compatibility and safety.
Figure 1: A pack of ten MXR IEC 320 C14 Panel Mount Power Connector Sockets, showing the front view of one socket and the rear view of the other nine.
Each socket is rated for AC 250V at 10A and is constructed from durable plastic and copper components. It meets international standards including CE and UL, ensuring high quality and safety.
Key Features
- Standard Compliance: Meets CE and UL standards for safety and performance.
- High Rated Load: Supports AC 250V at 10A, suitable for various power applications.
- Durable Construction: Made from high-quality plastic and copper for longevity.
- Versatile Application: Ideal for UPS systems, vehicle power supplies, power cabinets, lighting equipment, communication cabinets, and other power devices.
- Wide Compatibility: Can be used to repair or replace power interfaces in desktop computers, electric water heaters, kettles, refrigerators, washing machines, ovens, microwaves, dishwashers, audio equipment, printers, air conditioners, monitors, and televisions.
Product Dimensions and Views
Figure 2: Front view of the IEC 320 C14 socket, illustrating its connection with a standard power cord. The socket is rated for AC 250V 10A.
Figure 3: Detailed dimensions of the IEC 320 C14 socket, including mounting size and overall depth. Mounting size is 2.6 x 1.8 cm (1" x 0.7").
Figure 4: Rear view of the IEC 320 C14 socket, showing the three terminals labeled L (Line), E (Earth/Ground), and N (Neutral). This indicates a 3-pin configuration.
Figure 5: Overview of the multiple safety protection features integrated into the socket, including Over-Voltage, Over-Heat, Short-Circuit, Over-Load protection, and IP66 Waterproof Grade.
Setup and Installation
The IEC 320 C14 socket is designed for panel mounting. Proper installation ensures safe and reliable operation.
- Prepare Mounting Surface: Ensure the panel or enclosure has an opening compatible with the socket's mounting size (2.6 x 1.8 cm / 1" x 0.7").
- Secure the Socket: Insert the socket into the prepared opening. Use appropriate screws (not included) to secure the socket firmly to the panel through the designated screw holes.
- Wire Connections: Connect the power wires to the three terminals at the rear of the socket. Ensure correct polarity: Line (L), Earth/Ground (E), and Neutral (N). Refer to Figure 4 for terminal identification. Soldering or spade quick connectors can be used for connections.
- Verify Connections: Double-check all wiring for secure connections and correct polarity before applying power.
Figure 6: An illustration of the IEC 320 C14 socket being installed into the rear panel of a computer case, demonstrating a typical application.
Operating Instructions
Once installed, the IEC 320 C14 socket functions as a standard power inlet. Connect a compatible IEC 320 C13 power cord to the socket to supply power to the connected device.
- Ensure the power cord is fully inserted into the socket for a secure connection.
- Verify that the voltage and current ratings of the power source and the connected device are compatible with the socket's specifications (AC 250V, 10A).
- Do not exceed the maximum rated load of 10 Amps to prevent overheating or damage.
Maintenance and Care
The MXR IEC 320 C14 socket requires minimal maintenance. Follow these guidelines to ensure its longevity and safe operation:
- Cleaning: Disconnect power before cleaning. Use a dry, soft cloth to wipe the exterior of the socket. Avoid using liquid cleaners or solvents that could damage the plastic or internal components.
- Inspection: Periodically inspect the socket for any signs of wear, damage, or loose connections. Ensure the mounting screws remain tight.
- Environment: While the socket features IP66 Waterproof Grade protection, it is recommended to install it in environments that minimize exposure to excessive moisture or extreme temperatures to prolong its lifespan.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to device | Loose power cord connection | Ensure the IEC 320 C13 power cord is fully and securely inserted into the socket. |
| No power to device | Incorrect wiring | Verify that the Line (L), Earth (E), and Neutral (N) wires are correctly connected to their respective terminals. Consult Figure 4. |
| No power to device | Faulty power source or cord | Test the power source and the power cord with another device to confirm they are functional. |
| Socket feels warm | Overload or loose connection | Reduce the load on the circuit. Check for loose wire connections at the terminals. Ensure the current draw does not exceed 10 Amps. |
| Socket is loose in panel | Loose mounting screws | Tighten the mounting screws securing the socket to the panel. |
Specifications
| Attribute | Value |
|---|---|
| Model Number | 8541689537 |
| Rated Voltage | AC 250V |
| Rated Current | 10A |
| Mounting Size (L x W) | 2.6 x 1.8 cm (1" x 0.7") |
| Material | Plastic, Copper |
| Connector Type | IEC 320 C14 Panel Mount |
| Number of Pins | 3 |
| Color | Black |
| Compliance | CE, UL Standards |
| Package Dimensions | 5.67 x 2.95 x 0.94 inches |
| Item Weight | 2.39 ounces |
Warranty and Support
For information regarding warranty coverage and technical support for your MXR IEC 320 C14 Panel Mount Power Connector Socket, please refer to the manufacturer's official website or contact their customer service department. Keep your purchase receipt for warranty claims.
Manufacturer: WXLZJFZZR
