Zerodis B07DCSN43Y

Zerodis Portable Mini USB Rose Shape Humidifier Instruction Manual

Model: B07DCSN43Y

Introduction

Thank you for choosing the Zerodis Portable Mini USB Rose Shape Humidifier. This device is designed to provide a fine mist to humidify your personal space, offering a comfortable environment. It can also function as an aroma diffuser when essential oils are added. Please read this manual carefully before use to ensure proper operation and maintenance.

Safety Information

  • Use only clean tap water or distilled water. Do not use purified water or water with high mineral content, as this may affect mist output.
  • Do not immerse the device in water or any other liquid.
  • Keep out of reach of children and pets.
  • Ensure the USB power source is compatible with the device's voltage requirements.
  • Do not block the mist outlet during operation.
  • Unplug the device when not in use or before cleaning.
  • Avoid adding corrosive liquids or chemicals to the water tank.

Product Overview

The Zerodis Rose Shape Humidifier is a compact and portable device designed for personal use. It features a unique rose-shaped head and a long stem that acts as a water absorption filter.

Zerodis Rose Shape Humidifier emitting mist

Image: The Zerodis Rose Shape Humidifier in operation, showing mist being emitted from the rose-shaped head.

Close-up of the rose-shaped humidifier head

Image: A close-up view of the rose-shaped head of the humidifier, highlighting its design and mist outlet.

Components:

  • Rose-shaped humidifier head with mist outlet and power button.
  • USB power input port.
  • Water absorption filter stick (inside the stem).
  • USB power cable.

Setup

  1. Prepare the Water Absorption Filter: Before first use, or if the humidifier has been stored dry, remove the filter stick from the stem. Soak the entire filter stick in water for 5-10 minutes until it is fully saturated.
  2. Insert the Filter: Reinsert the saturated filter stick firmly into the stem of the humidifier head. Ensure it is properly seated.
  3. Place in Water: Place the stem of the humidifier into a container filled with clean tap water or distilled water. Ensure the water level is sufficient for the filter stick to be fully submerged.
  4. Connect Power: Connect the provided USB cable to the USB port on the humidifier head. Plug the other end into a compatible USB power source (e.g., computer, power bank, USB wall adapter).
Zerodis humidifier placed in a water container and connected to power

Image: The humidifier stem submerged in a glass of water, with the USB cable connected to the rose-shaped head, ready for operation.

Side view of the Zerodis humidifier head showing the USB port

Image: A side view of the rose-shaped humidifier head, clearly showing the micro USB input port for power connection.

Operating Instructions

  1. Power On: After setup, press the power button located on the top of the rose-shaped head. The humidifier will begin to emit mist.
  2. Aroma Diffusion (Optional): To use as an aroma diffuser, add 1-2 drops of water-soluble essential oil directly into the water container. Do not add oil directly to the humidifier head or filter stick.
  3. Power Off: Press the power button again to turn off the humidifier.
  4. Automatic Shut-off: The humidifier may feature an automatic shut-off function after a certain period (e.g., 4-6 hours) or when the water level is too low to prevent dry burning.

Maintenance

Regular cleaning and maintenance will prolong the life of your humidifier and ensure optimal performance.

  1. Daily Cleaning:
    • Unplug the humidifier.
    • Empty any remaining water from the container.
    • Wipe the humidifier head and stem with a soft, damp cloth.
    • Allow all parts to air dry completely before storage or next use.
  2. Filter Stick Replacement:
    • The water absorption filter stick should be replaced every 1-3 months, or sooner if you notice reduced mist output or discoloration.
    • To replace, gently pull out the old filter stick from the stem and insert a new, pre-soaked filter stick.
  3. Deep Cleaning (Weekly/Bi-weekly):
    • For mineral buildup, mix a solution of equal parts white vinegar and water.
    • Soak the filter stick in this solution for 30 minutes, then rinse thoroughly.
    • Wipe the mist outlet area with a cotton swab dipped in the vinegar solution, then wipe with clean water.
    • Do not use harsh chemicals or abrasive cleaners.

Troubleshooting

ProblemPossible CauseSolution
No mist or very little mist
  • Filter stick not fully saturated.
  • Filter stick clogged or needs replacement.
  • Insufficient water in the container.
  • Mist outlet blocked.
  • Power not connected or faulty.
  • Soak filter stick for 5-10 minutes.
  • Replace filter stick.
  • Add more water to the container.
  • Clean the mist outlet.
  • Check USB connection and power source.
Unpleasant odor
  • Stagnant water.
  • Dirty filter stick or humidifier.
  • Change water daily.
  • Clean the humidifier and replace the filter stick.
Humidifier not turning on
  • No power.
  • Faulty USB cable or power source.
  • Ensure USB cable is securely connected.
  • Try a different USB port or power adapter.

Specifications

FeatureDetail
ModelB07DCSN43Y
BrandZerodis
Power SourceCorded Electric (USB)
MaterialAcrylonitrile Butadiene Styrene
Special FeatureAroma Diffuser
Item Weight3.38 ounces
Dimensions (Approx.)4 cm (width) x 16.5 cm (height)
Dimensions of the Zerodis Rose Shape Humidifier

Image: A diagram illustrating the approximate dimensions of the humidifier, showing a width of 4 cm and a height of 16.5 cm.

Warranty and Support

For warranty information or technical support, please refer to the retailer or manufacturer's official website. Keep your purchase receipt as proof of purchase.

© 2026 Zerodis. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.