Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Rollerhouse RTS 12V DC Tubular Motor. This motor is designed to convert existing manual roller blinds into convenient, remote-controlled motorized shades, enhancing comfort and functionality in your home or office. Please read all instructions carefully before beginning installation or operation.
What's Included
Your Rollerhouse wired shade motor kit includes the following components:
- 1x DC12V Blinds Motor (Motor tube Φ 16mm/0.63 in.)
- 1x Mounting Bracket
- 1x Remote Control
- 1x 1in. (25mm) Rubber Fittings
- 1x Pair Instruction Manual
Image: Detailed view of the Rollerhouse motor kit components and their specifications.
Setup and Installation
This section guides you through the process of installing your Rollerhouse tubular motor into an existing roller shade. Ensure you have all components and necessary tools before starting.
Power Requirements
The DC12V motor requires a 12V DC power supply. Ensure a DC power source is nearby. Note that this motor is not compatible with 8 AA or 8 D battery packs due to constant power drain from the radio component.
Image: Manual Shade Retrofit Guide illustrating power options and motor tube dimensions.
Installation Steps
- Unclip and Remove Chain Drive: Unclip your existing manual blind and remove its chain drive mechanism.
- Measure Tube Dimensions: Accurately measure the Inner Diameter (ID) and Outer Diameter (OD) of your blind's shade tube. This is crucial for selecting the correct drive fittings.
- Remove End Cap and Bracket: Gently remove the end cap from the blind housing. Then, carefully pry away the bracket metal piece that holds the entire blind system together.
- Insert Motor: Hold the blinds up and insert the tubular motor into the shade tube. Ensure the charging port on the motor is facing upwards for easy access to the adapter or solar charger.
- Reassemble: Reinstall the bracket metal piece and the end cap. Ensure the antenna wire is not cut during reassembly.
Image: Visual guide detailing the installation process from manual shade to motorized.
Video Guide: Motorizing Existing Blinds
Video: A detailed guide on how to motorize your existing blinds, shades, and draperies using Rollerhouse motors.
Operating Instructions
Once installed, your Rollerhouse tubular motor can be operated using the included remote control. For advanced control, it can be integrated with smart home hubs.
Remote Control Operation
Use the remote control to raise, lower, and stop your motorized blinds. The remote allows for precise control over the shade's position.
Image: The Rollerhouse motor, remote control, and mounting hardware.
Smart Home Integration
The motor can work with smart bridges like Broadlink RM Pro to learn RF commands. This allows you to control your shades via smartphone apps and integrate them into your home automation system, including voice control with Amazon Alexa and Google Assistant (requires a separate hub).
Image: Diagram illustrating how the motor integrates with smart home systems for app and voice control.
Video Guide: Programming the Remote
Video: Instructions on how to program the remote control to operate your motorized blinds.
Video Guide: Connecting to RF Hub
Video: A guide on how to connect your RF Shade Motor to an RF hub, such as Broadlink.
Maintenance
To ensure the longevity and optimal performance of your Rollerhouse tubular motor, follow these simple maintenance guidelines:
- Cleaning: Spot clean the motor and surrounding components as needed. Avoid using harsh chemicals or abrasive materials.
- Power Source: Ensure a stable 12V DC power source is used. Avoid using battery packs for extended periods due to constant power drain.
Video Guide: Changing Rubber Pieces
Video: A tutorial on how to change the rubber pieces at the end of the tubular motor.
Troubleshooting
If you encounter issues with your Rollerhouse tubular motor, refer to the common problems and solutions below:
- Motor Not Responding: Ensure the 12V DC power supply is properly connected and providing power. Check the remote control battery.
- Motor Runs Slowly: This can occur with some shades. Ensure the shade weight does not exceed the motor's lifting capacity (up to 4.4 lbs for 1" tube).
- Battery Drains Quickly (if using battery pack): The radio component of the unit causes constant power drain. It is recommended to use an AC 12V 2 amp power supply instead of battery packs for continuous operation.
- Missing or Ill-fitting Parts: If parts are missing or do not fit correctly, contact Rollerhouse customer service for assistance. Some users have found success with 3D printing custom adapters if needed.
- Motor Failure: In rare cases, a motor may fail after extended use. If within the warranty period, contact customer support for replacement or repair.
Specifications
| Feature | Specification |
|---|---|
| Brand | Rollerhouse |
| Model Number | 16mm_Radio_DC_12V |
| Voltage | 12 Volts |
| Horsepower | 7.2 Watts |
| Speed | 0.6 A/W |
| Material | Metal+plastic |
| Item Weight | 0.41 Kilograms (14.4 ounces) |
| UPC | 612289935791 |
| Included Components | 12v motor blind, Mounting Hardware, remote |
| Care Instructions | Spot Clean |
Warranty and Support
For warranty information, technical support, or any inquiries regarding your Rollerhouse product, please visit the official Rollerhouse store or contact their customer service directly.
Official Rollerhouse Store: https://www.amazon.com/stores/Rollerhouses/page/018EE1FB-1C43-46A7-A7C9-61E1A8AE468D
