Introduction
Thank you for choosing Xprite 7" LED Headlights. These high-performance headlights are designed to provide superior illumination and enhance the aesthetic appeal of your vehicle. Featuring advanced LED technology, these lights offer multiple lighting modes, durable construction, and a long lifespan. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your new headlights.

Image: Xprite 7-inch LED Projector Headlights with Blue Halo installed on a Jeep Wrangler, showcasing the blue halo rings and overall appearance.
Product Features
- High-Performance LED Chip: Offers brighter illumination compared to original halogen and HID headlights, with 9600 Lumens output and over 50,000 hours of service lifespan.
- Four Lighting Modes: Equipped with High Beam, Low Beam, Daytime Running Light (DRL), and Amber Turn Signal Light for various driving scenarios.
- Durable Construction: Made from die-casting aluminum housing and a polycarbonate lens. Features a ribbed design for efficient cooling and IP67 waterproof rating for rustproof, shock-proof, and sealed housing.
- Easy Installation: Designed for plug-and-play installation, including LED ballast, CANBUS, and H4/H13 adapter.
- Integrated Cooling System: Large rear cooling ribs optimize heat dissipation.
- Low Power Consumption: Efficient design ensures minimal power usage.
Package Contents
Verify that all components are present before beginning installation:
- One Pair of Xprite 7" inch 90W LED Headlights with Halo Ring
- H4 to H13 Adapters
- DRL & Turn Signal Wiring

Image: The complete package contents for the Xprite 7-inch LED Headlights, including the two headlights, H4 to H13 adapters, and the DRL and turn signal wiring harnesses.
Compatibility
These Xprite 7" LED Headlights are compatible with the following vehicle models:
- 1997-2006 Jeep Wrangler TJ
- 2004-2006 Jeep Wrangler LJ Unlimited
- 2007-2018 Jeep Wrangler Unlimited JK 2 & 4 Door
- 1992-2001 AM General Hummer
- 2003-2009 Hummer H1 & H2
Note: For 2017-2018 Jeep Wrangler JK models with OEM LED Headlights, a separate headlight bracket (ASIN B07DPBMNL4) is required for proper installation. Please check your local laws regarding colored halo lights before purchasing and installing.
Installation Instructions
The installation process is designed to be plug-and-play. For a visual guide, please refer to the installation video below. Always ensure the vehicle's power is off before beginning any electrical work.
Video Guide: Installing Xprite 7" LED Headlight w/ Blue Halo on 07-18 Jeep Wrangler JK
Video: This official Xprite video demonstrates the step-by-step process of replacing factory LED headlights with Xprite 7" LED Headlights on a 2007-2018 Jeep Wrangler JK. It covers removing the old headlights, installing the new mounting brackets, and securing the new headlights.
Step-by-Step Installation:
- Preparation: Ensure the vehicle is turned off and the battery is disconnected for safety.
- Remove Grille: Carefully remove the front grille of your Jeep Wrangler to access the headlights.
- Remove Factory Headlights:
- Unscrew the headlight retainer ring using a screwdriver.
- Remove the adjustment screws.
- Gently pull out the entire headlight housing.
- Disconnect the electrical connector from the factory headlight.
- Install New Mounting Bracket: Line up the new mounting bracket (if required for your model, especially 2017-2018 JK OEM LED) to the existing mounting points and secure it.
- Connect Xprite Headlights:
- Connect the H4/H13 adapter from the Xprite headlight to your vehicle's factory wiring harness.
- For Daytime Running Lights (DRL) and Turn Signal functions, connect the additional DRL & Turn Signal wiring. The yellow wire is typically for the turn signal (connect to your vehicle's turn signal wire), and the red wire is for ACC (connect to an accessory power source in your fuse box). Ensure secure connections, soldering is recommended for reliability.
- Insert New Headlights: Carefully place the Xprite 7" LED Headlights into the mounting brackets.
- Secure Headlights: Reinstall the adjustment screws and the headlight retainer ring to firmly hold the new headlights in place.
- Test Functionality: Reconnect the battery and test all lighting modes (Low Beam, High Beam, DRL, Turn Signal) to ensure they are functioning correctly.
- Adjust Headlight Aim: Adjust the headlight aim as needed to ensure proper light distribution and avoid blinding oncoming traffic.
- Reinstall Grille: Once satisfied with the installation and alignment, reinstall the front grille.
Operating Instructions
Your Xprite 7" LED Headlights offer four distinct lighting modes:
- Low Beam: Provides standard illumination for regular driving conditions, designed to illuminate the road ahead without dazzling other drivers.
- High Beam: Offers maximum illumination for increased visibility on dark roads or off-road conditions.
- Daytime Running Light (DRL): The halo ring illuminates to enhance vehicle visibility during daylight hours. This function activates when the ACC wire is properly connected.
- Amber Turn Signal Light: The halo ring flashes amber to indicate turns or lane changes when the turn signal wire is properly connected.

Image: Visual representation of the four lighting modes: Low Beam, High Beam, Amber Turn Signal, and Blue Daytime Running Light.
Maintenance
To ensure the longevity and optimal performance of your Xprite LED Headlights, follow these maintenance guidelines:
- Cleaning: Clean the polycarbonate lens regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the lens.
- Inspection: Periodically check all wiring connections to ensure they are secure and free from corrosion. Inspect the housing for any signs of damage.
- Moisture Release: The headlights are equipped with a breathing valve for moisture release. Ensure this valve is not obstructed.

Image: Detailed view of the headlight's construction, highlighting the durable polycarbonate lens, breathing valve, and ribbed die-cast aluminum base for heat dissipation.

Image: The headlight submerged in water, illustrating its IP67 weatherproof rating and sealed housing design.
Troubleshooting
If you encounter issues with your Xprite LED Headlights, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Headlights not turning on or flickering | Loose wiring connection, faulty adapter, CANBUS incompatibility. | Check all electrical connections for tightness. Ensure the H4/H13 adapter is fully seated. Verify CANBUS is correctly installed and functioning. If flickering persists, ensure proper grounding and power supply. |
| DRL or Turn Signal not working | Incorrect wiring for DRL/Turn Signal, loose connection. | Confirm that the DRL (red) and Turn Signal (yellow) wires are correctly connected to their respective power sources and signal wires. Check for any breaks or loose connections in the wiring. |
| Headlights are too bright or blinding oncoming traffic | Improper headlight aim. | Adjust the headlight aim using the adjustment screws. Refer to local regulations for proper headlight alignment. |
| Moisture inside the lens | Condensation, obstructed breathing valve. | This is often normal condensation that dissipates. Ensure the breathing valve is clear and not blocked. If excessive moisture persists, contact support. |
Specifications
| Specification | Detail |
|---|---|
| Brand | Xprite |
| Model Number | HL-90W-G2-B |
| Light Source Type | LED |
| Wattage | 90W/set; 45W/bulb (High Beam) |
| Voltage | DC12V (Operating range: 9-30V) |
| Lumens | 9600 LM/Kit (High Beam) & 7200 LM/Kit (Low Beam) |
| Color Temperature | 6000K |
| Lifespan | Over 50,000 hours |
| Material | Die-Cast Aluminum Housing and Durable Polycarbonate Lens |
| Waterproof Rating | IP67 |
| Item Dimensions | 7.01 inches (Diameter) x 3.67 inches (Depth) |
| Auto Part Position | Front |
| Included Components | 7" inch 90W LED Headlights with Halo Ring, H4/H13 Adapters, DRL & Turn Signal Wiring |

Image: Product specifications including wattage, lifespan, color temperature, and physical dimensions of the headlight.
Warranty and Support
Xprite provides a 1-YEAR WARRANTY for these 7" LED Headlights. For technical assistance, warranty claims, or any product-related inquiries, please contact Xprite customer support.
Manufacturer Contact Information: Chino, CA 91710, US
For the most up-to-date support information, please visit the official Xprite website or refer to your purchase documentation.