Introduction
This manual provides detailed instructions for the safe and efficient operation, installation, and maintenance of your Kenmore 29" Front Load Gas Dryer. Designed for practical laundry care, this gas dryer features a spacious 7.0 cubic foot capacity, making it suitable for various load sizes, from everyday garments to large bedding items. Key technologies such as SmartDry and Wrinkle Guard are integrated to enhance drying performance and convenience.
The SmartDry technology utilizes drying sensors to automatically adjust temperatures and times, preventing over-drying and potential heat damage. The Wrinkle Guard option helps keep clothes crisp by periodically tumbling them after the drying cycle. Please read this manual thoroughly before using your dryer to ensure proper function and longevity.
Setup and Installation
Proper installation is crucial for the safe and optimal performance of your gas dryer. This appliance requires a gas line connection and a 120-volt electrical outlet. Please note that power cords and exhaust vents are not included and must be purchased separately.
The dryer is designed for freestanding installation. Its dimensions are approximately 29 inches (W) x 28 inches (D) x 43 inches (H). When paired with a compatible Kenmore 20362 Top-Load Washer (sold separately), it creates a complete and efficient laundry system.
Figure 1: Kenmore Gas Dryer with approximate dimensions (29" W x 28" D x 43" H).
Figure 2: The Kenmore Gas Dryer (right) shown alongside a compatible Kenmore Top-Load Washer (left) in a typical laundry room setup.
Operating Instructions
Your Kenmore Gas Dryer offers intuitive controls for various drying needs. The control panel is located on the top front of the appliance.
Figure 3: Front view of the Kenmore Gas Dryer, highlighting the accessible control panel.
Loading the Dryer
The dryer features a large 7.0 cubic foot drum, capable of handling substantial loads, including bulky items like duvets and blankets. For optimal drying, avoid overfilling the drum to allow clothes to tumble freely.
Figure 4: Loading a typical laundry item into the dryer's spacious drum.
Figure 5: The large capacity drum accommodates bulky items such as blankets.
Selecting a Drying Cycle
Turn the main cycle knob to select your desired drying cycle. Options include:
- Timed Dry: Allows manual setting of drying time (e.g., 20, 30, 40, 50, 60, 70 minutes).
- Auto Dry: Utilizes SmartDry technology to sense moisture levels and automatically stop when clothes are dry. Settings include Low Heat, Normal, and More.
- Air Only: Provides a no-heat tumble for delicate items or to fluff clothes.
Figure 6: The Auto Dry knob, allowing selection of heat levels and automatic drying based on moisture sensing.
Adjusting Temperature
The Dry Temp knob allows you to select from four unique drying temperatures:
- Low: Suitable for delicates.
- Medium: Ideal for casual wear.
- High: Recommended for cottons.
- Air Dry: No heat.
Figure 7: The Dry Temp knob for selecting appropriate heat settings for different fabric types.
Wrinkle Guard Feature
To prevent wrinkles from setting in, activate the Wrinkle Guard option. This feature will periodically tumble the load for up to 40 minutes after the main drying cycle completes, keeping clothes fresh until you can remove them.
Starting the Dryer
After loading clothes and selecting your desired cycle and temperature, press the 'Push to Start' button to begin the drying process.
Maintenance
Regular maintenance ensures the longevity and efficiency of your Kenmore Gas Dryer.
Lint Filter Cleaning
Clean the lint filter before or after every load. A clogged lint filter can reduce drying efficiency and pose a fire hazard. Simply pull out the lint filter, remove accumulated lint, and reinsert it.
Troubleshooting
If you encounter issues with your dryer, consider the following common troubleshooting steps:
- Dryer does not start: Ensure the dryer is properly plugged into a functioning electrical outlet and the door is fully closed. Check if the circuit breaker has tripped.
- Clothes are not drying: Verify that the lint filter is clean and the exhaust vent is not obstructed. Ensure the correct drying cycle and temperature are selected for the load size and fabric type.
- Unusual noises: Check for foreign objects in the drum. If noises persist, contact customer support.
For more complex issues, refer to the official user manual PDF or contact Kenmore customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Kenmore |
| Model Number | 72332 |
| Manufacturer | Sears Home Services - water filters |
| Item Weight | 97.8 pounds |
| Product Dimensions | 28 x 29 x 36 inches |
| Country of Origin | China |
| Size | 7.0 cu. ft. |
| Color | White |
| Style | Gas |
| Material | Alloy Steel |
| Power Source | Gas Powered |
| Voltage | 120 Volts |
| Installation Method | Freestanding |
| Item Package Quantity | 1 |
| Included Components | Gas Laundry Drying Machine |
| Batteries Required? | No |
Warranty Information
The Kenmore 29" Front Load Gas Dryer comes with a 13-month warranty from the date of purchase. For detailed terms and conditions, please refer to the warranty documentation included with your product or contact Kenmore customer support.
Support and Resources
For additional assistance, technical support, or service inquiries, please contact Kenmore customer support. You can also find more information and a downloadable PDF version of the user manual via the following link:
