Atomi Smart Qi Wireless Charge Stand

Download PDF
Contents

Atomi Qi Wireless Charge Stand - User Manual

Model: Qi Wireless Charge Stand | Brand: Atomi Smart

Introduction

The Atomi Qi Wireless Charge Stand provides a convenient and efficient way to charge your Qi-enabled devices. Designed for fast charging, it offers a stable and angled platform for optimal viewing while your device powers up. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your wireless charge stand.

Atomi Qi Wireless Charge Stand and its packaging

Image: The Atomi Qi Wireless Charge Stand shown with its retail packaging, highlighting key features.

Setup

  1. Unpack the Device: Carefully remove the Atomi Qi Wireless Charge Stand from its packaging.
  2. Connect to Power: Connect the included USB cable to the charge stand. Plug the other end of the USB cable into a compatible USB wall adapter (not included). For optimal fast charging performance, use a 10W or higher output USB wall adapter.
  3. Placement: Place the charge stand on a flat, stable surface. Ensure there is adequate ventilation around the device.
  4. Indicator Light: The non-disruptive LED indicator light on the front of the stand will illuminate to show its status.
Close-up of Atomi Qi Wireless Charge Stand showing 45-degree angle and LED indicator

Image: A close-up view of the Atomi Qi Wireless Charge Stand, illustrating its 45-degree viewing angle and the subtle LED indicator light.

Operating Instructions

Using your Atomi Qi Wireless Charge Stand is simple:

  1. Place Your Device: Gently place your Qi-enabled smartphone onto the charging surface of the stand. Ensure the phone is centered on the stand for proper alignment with the internal charging coils.
  2. Confirm Charging: The LED indicator light on the stand will change to confirm that your device is charging. Your device's screen will also typically show a charging icon or notification.
  3. Optimal Viewing: The stand is designed to hold your phone at a perfect 45-degree viewing angle, allowing you to comfortably view notifications, watch videos, or make video calls while charging.
  4. Fast Charging: This stand supports 10W Qi fast charging, enabling compatible devices to charge up to two times faster than standard wireless chargers.
Smartphone placed on Atomi Qi Wireless Charge Stand on a desk

Image: A smartphone resting on the Atomi Qi Wireless Charge Stand on a wooden desk, illustrating ease of use.

Smartphone charging on Atomi Qi Wireless Charge Stand in a living room setting

Image: A smartphone actively charging on the Atomi Qi Wireless Charge Stand, positioned on a coffee table in a living room environment.

Maintenance

  • Cleaning: Disconnect the charger from power before cleaning. Use a soft, dry cloth to wipe the surface of the charge stand. Do not use abrasive cleaners, solvents, or harsh chemicals.
  • Storage: When not in use, store the charge stand in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid Liquids: Keep the device away from water and other liquids. If the device comes into contact with liquid, disconnect it immediately and allow it to dry completely before re-use.

Troubleshooting

Device not charging:
  • Ensure the USB cable is securely connected to both the charge stand and the USB wall adapter.
  • Verify that the USB wall adapter is properly plugged into a working power outlet.
  • Confirm your device is Qi-enabled.
  • Adjust the position of your device on the charging stand to ensure proper alignment with the internal charging coils.
  • Remove any thick or metallic phone cases that may interfere with wireless charging.
Slow charging:
  • Ensure you are using a 10W or higher output USB wall adapter. Lower wattage adapters will result in slower charging speeds.
  • Check if your phone supports 10W fast wireless charging. Some devices may only support standard 5W or 7.5W wireless charging.
  • Avoid using your phone excessively while it is charging wirelessly, as this can slow down the charging process.
LED indicator not working:
  • Ensure the charge stand is receiving power.
  • If the issue persists, try a different USB cable or wall adapter.

Specifications

Product Dimensions2.7 x 2.7 x 6 inches
Item Weight4.8 ounces
Connectivity TechnologyWireless
Special FeaturesFast Charging, Wireless Charging
ColorBlack
What's in the Box1 x Charger (Wireless Charge Stand)
ManufacturerAtomi Inc.
Compatible DevicesSmartphones
Compatible Phone ModelsQi-enabled, iPhone, Samsung Galaxy 8 series
Input Voltage240 Volts (Note: This refers to internal component rating. The actual input from a USB adapter is typically 5V-12V depending on fast charging protocols.)
Mounting TypeTabletop Mount

Warranty and Support

For detailed warranty information and customer support, please refer to the official Atomi Smart website or the user guide PDF provided with your product. A digital version of the user guide can be accessed via this link: Atomi Qi Wireless Charge Stand User Guide (PDF).

For further assistance, please contact Atomi Smart customer service through their official channels.

© 2023 Atomi Smart. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.