1. Product Overview
The K&H Pet Products Thermo-Snuggle Cup Bomber is an indoor heated pet bed designed to provide warmth and comfort for cats and small dogs. Its soft fleece interior and raised walls create a secure nesting environment. The bed features a removable 4-watt heater that provides warmth when a pet is present, and it is machine washable for easy care.
Key features include:
- Soft, flexible sidewalls for comfort.
- Removable 4-watt heater.
- Thermostatically controlled to warm to a pet's normal body temperature.
- Machine washable bed cover (after heater removal).
- Safety certified by MET Labs, exceeding USA/CA electrical safety standards.
- Suitable for indoor household use with 110/120 volt electrical current only.
Image: K&H Thermo-Snuggle Cup Bomber Heated Pet Bed with a cat inside.
Image: Visual representation of the bed's features.
2. Safety Information
This product is designed for pet safety and energy efficiency. Please adhere to the following safety guidelines:
- Use only with 110/120 volt electrical current.
- Ensure the bed is plugged directly into an appropriate electrical outlet.
- Do not use extension cords unless absolutely necessary and ensure they are rated for the product's wattage.
- Regularly inspect the power cord for any damage. Discontinue use if damage is observed.
- The product is safety certified by MET Labs, ensuring compliance with electrical safety standards.
Image: Electrical safety tips for heated pet products.
3. Setup Instructions
- Unpack the heated pet bed and ensure all components are present: the bed and the removable heater.
- Insert the heater into the designated pocket within the bed.
- Place the bed in your desired indoor location, ensuring it is on a flat, stable surface.
- Plug the bed's power cord directly into a 110/120 volt electrical outlet.
Initial Warmth Test:
The K&H Heated Bed is designed to warm only when your pet is lying on it. It may not feel warm to the touch when empty. To test the heating function:
- Plug the bed directly into an outlet and allow it to sit for 1 hour.
- Place a large pillow on top of the bed's sleeping surface.
- Wait approximately 20 minutes.
- Feel under the pillow. The bed should feel warm, not hot. If warmth is detected, the product is functioning as intended.
Image: Instructions for testing the heated pet bed's functionality.
4. Operating Instructions
The Thermo-Snuggle Cup Bomber features an internal smart thermostatic control. This system automatically warms the bed's surface to your pet's normal body temperature only when your pet is in the bed. This design ensures consistent comfort, safety, and energy efficiency.
The bed is designed to provide soothing warmth, which can be beneficial for pets, particularly those with joint discomfort.
Image: Benefits of the heated pet bed, including joint soothing warmth.
5. Maintenance
To ensure the longevity and hygiene of your K&H Thermo-Snuggle Cup Bomber, follow these care instructions:
- Before Washing: Always remove the internal heater from the bed cover.
- Machine Washing: Wash the bed cover separately using mild detergents. Do not use bleach. Select a cold water, gentle cycle.
- Drying: Air or line dry the bed cover. Alternatively, tumble dry on the lowest heat setting. Ensure the bed cover is completely dry before reinserting the heater and allowing your pet to use it.
For warmer seasons, the removable heater can be stored, allowing the bed to be used as a comfortable, unheated resting spot.
Image: Instructions for machine washing the pet bed cover.
Image: Demonstrating the bed's all-season use with a removable heating pad.
6. Troubleshooting
If you suspect the heated bed is not functioning correctly, perform the following check:
Issue: Bed does not feel warm to the touch.
Solution: The K&H Heated Bed is designed to only warm when your pet is lying in it. This is a normal, energy-efficient operation. To verify the heating element is working, follow the 'Initial Warmth Test' steps outlined in Section 3: Setup Instructions. If, after performing the test, the area under the pillow does not feel warm, please refer to the warranty information for further assistance.
7. Specifications
- Model Name:
- Thermo-Snuggle Cup Bomber - Indoor Heated Cat Bed
- Item Model Number:
- 100213588
- Product Dimensions:
- 18"L x 14"W x 8"Th (18 x 14 x 8 inches)
- Item Weight:
- 1.26 pounds
- Color:
- Gray
- Material:
- Polyester
- Power:
- 4-watt removable heater
- Voltage:
- 110/120 volt electrical current only
- Target Audience:
- Cats, Small Dogs
- Special Feature:
- Heating, Thermostatically Controlled
- Care Instructions:
- Remove heater, machine wash separately (cold water, gentle cycle, mild detergent, no bleach), air or line dry, or tumble dry on lowest setting.
Image: Product dimensions and cord length.
8. Warranty and Support
This K&H Pet Products Thermo-Snuggle Cup Bomber Heated Pet Bed comes with a one-year limited manufacturer warranty.
For warranty claims, product support, or any questions not covered in this manual, please contact K&H Pet Products directly. Refer to the official K&H Pet Products website or your purchase documentation for current contact information.
