Introduction
This manual provides essential instructions for the safe and efficient operation of your American DJ COLOR STAND LED REMOTE Stage Lighting Controller. This device is designed to provide versatile lighting control for various stage and event applications, featuring 20 individual RGBW bulbs and wireless remote control capabilities. Please read this manual thoroughly before use and retain it for future reference.
Safety Information
To reduce the risk of electrical shock, fire, or injury, always follow these basic safety precautions:
- Read all instructions: Familiarize yourself with the product's features and operation before use.
- Power Source: Connect the unit only to a grounded AC power outlet with the specified voltage.
- Moisture: Do not expose the unit to rain or moisture. Do not use near water.
- Heat: Keep the unit away from heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Ventilation: Ensure proper ventilation. Do not block any ventilation openings.
- Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
- Cleaning: Unplug the unit from the power outlet before cleaning. Use a dry cloth only.
Package Contents
Please check the contents of your product box to ensure all items are present and in good condition:
- American DJ COLOR STAND LED REMOTE Stage Lighting Controller
- Wireless Remote Control
- Power Cable (Corded Electric)
- User Manual (this document)
Setup
- Unpacking: Carefully remove all components from the packaging.
- Placement: Position the COLOR STAND LED REMOTE on a stable, level surface. This unit is designed for floor mount applications. Ensure adequate space around the unit for ventilation.
- Power Connection: Connect the provided power cable to the unit's power input and then to a suitable grounded AC power outlet.
- Remote Control: Ensure the wireless remote control has functional batteries (not included).
Image: The American DJ COLOR STAND LED REMOTE Stage Lighting Controller, showcasing its compact design and remote. This image illustrates the product's appearance and typical setup.
Operating Instructions
The COLOR STAND LED REMOTE offers various lighting effects and controls via its wireless remote.
Basic Operation:
- Power On/Off: Use the designated power button on the remote control to turn the unit on or off.
- Color Selection: The unit features 20 individual RGBW bulbs. Use the color selection buttons on the remote to choose from a wide spectrum of colors.
- Brightness Adjustment: Adjust the intensity of the lights using the brightness control buttons on the remote.
- Speed Adjustment: For dynamic lighting modes, use the speed adjustment buttons to control the transition speed of colors or effects.
Advanced Features:
- Color-Changing Modes: Activate pre-programmed color-changing sequences. Refer to the remote's specific buttons for these modes.
- Demo Program Mode: Engage the demo mode to cycle through various built-in lighting programs, showcasing the unit's capabilities.
Note: Ensure the remote control is pointed towards the front of the lighting controller for optimal signal reception.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your lighting controller.
- Cleaning: Regularly clean the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
- Ventilation: Keep ventilation openings clear of dust and debris to prevent overheating.
- Storage: When not in use for extended periods, store the unit in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cable Inspection: Periodically inspect the power cable for any signs of damage. If damaged, replace it with an approved cable.
Troubleshooting
If you encounter issues with your COLOR STAND LED REMOTE, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | No power supply; faulty power cable; unit malfunction. | Check power cable connection to unit and outlet. Ensure outlet is functional. Try a different power cable if available. If problem persists, contact support. |
| Remote control is unresponsive. | Dead batteries; remote out of range; obstruction between remote and unit. | Replace remote control batteries. Ensure remote is within effective range and pointed directly at the unit. Remove any obstructions. |
| Lights are not changing color or responding to commands. | Remote signal issue; unit in a fixed mode. | Verify remote functionality (see above). Try cycling the power to the unit. Ensure no other devices are interfering with the remote signal. |
If the problem persists after attempting these solutions, please contact American DJ customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | COLOR STAND LED REMOTE |
| Brand | adj |
| Color | RGBW |
| Shape | Rectangular |
| Light Source Type | Light Emitting Diode |
| Shade Material | Metal |
| Power Source | Corded Electric |
| Style | Modern |
| Mounting Type | Floor Mount |
| Bulb Features | Color-changing, Remote Control, Speed Adjustable, Brightness Adjustment, Demo Program Mode |
| Number of Light Sources | 20 |
| Batteries Included | No |
| Product Dimensions | 6"L x 3.5"W x 2.5"H |
| Item Weight | 0.81 ounces |
| UPC | 818651024524 |
| ASIN | B07D9GC52Q |
Warranty and Support
For warranty information and technical support, please refer to the official American DJ website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
Manufacturer: American DJ Group of Companies
Website: www.adj.com (Example link, please verify official website)
