Introduction
This manual provides instructions for the proper use and care of your Blacell AC Power Cord. This power cord is specifically designed as a replacement or spare for Monster Rockin Roller 2, 3, RR2, and RR3 Bluetooth Speakers. Please read this manual carefully to ensure safe and effective operation.
Product Overview
Image 1: The Blacell AC Power Cord, shown coiled. This cord is designed to provide power to compatible Monster Rockin Roller speakers.
The Blacell AC Power Cord is a 6-foot long, black power cable featuring a standard NEMA 5-15P (Type B) male plug on one end and an IEC C13 female connector on the other. It is rated for 125 Volts and is intended for use with specific Monster Rockin Roller Bluetooth Speaker models.
Setup and Compatibility
- Verify Speaker Compatibility: Ensure your speaker is a Monster Rockin Roller 2, 3, RR2, or RR3 model. This power cord is specifically designed for these models.
- Inspect the Power Cord: Before use, visually inspect the power cord for any signs of damage, such as cuts, frayed wires, or bent prongs. Do not use a damaged cord.
- Connect to Speaker: Locate the power input port on your Monster Rockin Roller speaker. This port typically has three pins. Align the female end of the Blacell AC Power Cord with the speaker's power input and push firmly until it is securely seated.
- Connect to Power Outlet: Insert the male plug of the power cord into a standard 120V AC wall outlet. Ensure the outlet is easily accessible and not overloaded.
Image 2: This image illustrates the female connector of the power cord and the corresponding power input on a compatible speaker. It is essential to verify that the shape of your speaker's power input matches the connector on this cord before use.
Operating Instructions
Once the power cord is securely connected to both the speaker and a power outlet, your Monster Rockin Roller speaker should receive power. You can then proceed to operate your speaker according to its own instruction manual. The power cord facilitates the charging of the speaker's internal battery and/or direct operation from AC power.
Image 3: A detailed view of the male (NEMA 5-15P) and female (IEC C13) connectors of the power cord, highlighting their design for secure connection.
Maintenance and Safety
- Storage: When not in use, store the power cord in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cord to prevent damage.
- Cleaning: Disconnect the power cord from both the speaker and the wall outlet before cleaning. Wipe the cord with a dry, soft cloth. Do not use liquid cleaners or immerse the cord in water.
- Handling: Always grasp the plug, not the cord, when connecting or disconnecting. Avoid placing heavy objects on the cord or running it through high-traffic areas where it could be tripped over or damaged.
- Damage: If the power cord becomes damaged, discontinue use immediately and replace it with a new, compatible cord. Do not attempt to repair a damaged power cord.
Troubleshooting
If your speaker is not receiving power after connecting the Blacell AC Power Cord, consider the following:
- Check Connections: Ensure both ends of the power cord are fully and securely inserted into the speaker and the wall outlet.
- Verify Outlet Functionality: Test the wall outlet with another device to confirm it is supplying power.
- Inspect Cord for Damage: Re-examine the power cord for any visible damage. A damaged cord must be replaced.
- Speaker Issues: If the cord and outlet are confirmed to be working, the issue may lie with the speaker itself. Refer to your speaker's instruction manual for further troubleshooting.
Specifications
| Brand | Blacell |
| Product Type | AC Power Cord Cable |
| Compatibility | Monster Rockin Roller 2, 3, RR2, RR3 Bluetooth Speakers |
| Length | 6 Feet (1.8 meters) |
| Color | Black |
| Connector Type (Male) | NEMA 5-15P (Type B, 3-prong) |
| Connector Type (Female) | IEC C13 |
| Voltage Rating | 125 Volts |
| Item Weight | 3.84 ounces (approx. 109 grams) |
Image 4: A close-up of the male plug, showing its rating. Note that while the plug itself might be rated for 250V, the product is specified for 125V use in the US market.
Packaging Information
The Blacell AC Power Cord is typically supplied in a sealed, protective bag to ensure its condition upon arrival.
Image 5: The Blacell AC Power Cord as it appears in its retail packaging.
