Furrion Vision S Wireless RV Backup Camera System

1. Introduction and Overview

The Furrion Vision S Observation system is designed to enhance safety and security for RVs and other large vehicles. This system provides a clear, real-time view of your surroundings, aiding in backing up, changing lanes, and monitoring your vehicle when parked. It features a 4.3-inch monitor and a multi-feature observation camera with advanced capabilities like night vision, enhanced resolution, motion detection, and a built-in microphone.

Figure 1: Furrion Vision S 4.3-inch Monitor and Rear Camera.

2. What's in the Box

Your Furrion Vision S Wireless RV Backup Camera System package includes the following components:

• 1x 4.3" Monitor
• 1x Vision S Rear/Doorway Camera with removable antenna
• 4x Screws
• 4x Zip Ties
• 1x Windshield Mount
• 1x Power Cable
• Warranty Card
• User Manual (this document)

3. Setup and Installation

The Furrion Vision S system is designed for quick and easy installation, especially for RVs prepped for the Vision S camera system. For non-prepped units, installation is still straightforward.

3.1 Camera Installation

Most RVs come pre-wired for the Vision S camera system, which simplifies the installation process by eliminating the need for extensive drilling. Locate the pre-installed sharkfin mount on the rear of your RV. Remove the cover plate, connect the camera wire to the pre-wired power jack, and then mount the camera using the provided screws. Ensure the antenna is positioned parallel with the back wall of the trailer for optimal signal.

Figure 2: Rear camera mounted on an RV.

3.2 Monitor Setup

The 4.3-inch monitor can be mounted using the included windshield mount, allowing for customizable viewing angles. Connect the monitor to a 12V power source in your vehicle using the provided power cable. Once powered on, the monitor should automatically pair with the camera. If pairing does not occur automatically, refer to the pairing instructions in the full user manual (PDF) available for download.

Figure 3: Monitor displaying rear view in a vehicle.

4. Operating Instructions

The Furrion Vision S system is designed for intuitive operation, providing clear visual and audio feedback to assist with vehicle maneuvers and security.

4.1 Monitor Functions

• Anti-Glare Display: The monitor features an anti-glare screen for clear visibility in various lighting conditions.
• Park Assist Marker Lines: Integrated park assist lines appear on the display to guide you during backing maneuvers.
• Multi-Camera Support: While this system includes one rear camera, the monitor is capable of displaying images from up to four cameras (additional cameras sold separately), providing comprehensive all-around coverage.
• Auto-Wake Function: Convenient motion sensors can auto-wake the display, activating the camera view when motion is detected.

Figure 4: Monitor displaying multiple camera views.

4.2 Camera Features

• Infrared Night Vision: The camera is equipped with infrared night vision for clear visibility in low-light conditions.
• Wide Viewing Angle: A wide-angle lens provides an expansive view of the area behind your vehicle.
• IP65 Waterproof: The camera is rated IP65 waterproof, ensuring durability and performance in various weather conditions.
• Built-in Microphone: The integrated microphone transmits audio to the monitor, useful for parking guidance or added security.

Figure 5: Close-up of the camera with night vision capabilities.

5. Features and Benefits

The Furrion Vision S system offers several key features designed to enhance your RV experience:

• Stable & Long-Range Signal: Wireless communication provides a reliable digital connection with minimal lag between the camera and monitor. The system is tested for up to 100 feet at high speeds and an extended range of up to 492 feet in open spaces.
• Enhanced Safety and Security: The camera system can function as a security system when parked, with motion sensors that auto-wake the display. The microphone allows for audio monitoring.
• High-Resolution Imaging: The camera provides a high-resolution (720 x 480) image for clear viewing.
• Durable Design: The IP65 waterproof rating ensures the camera can withstand various environmental conditions.

Figure 6: Key features and benefits of the Vision S system.

6. Maintenance

To ensure optimal performance and longevity of your Furrion Vision S system, follow these general maintenance guidelines:

• Regular Cleaning: Periodically clean the camera lens and monitor screen with a soft, damp cloth. Avoid abrasive cleaners that could scratch surfaces.
• Cable Inspection: Regularly inspect all cables and connections for any signs of wear, damage, or corrosion. Ensure connections are secure.
• Firmware Updates: Check the official Furrion website periodically for any available firmware updates for your system.
• Storage: When not in use for extended periods, store the monitor in a cool, dry place, ideally in its original packaging or a protective case.

7. Safety Information

This product utilizes high voltage. Any unauthorized modifications or damage to the product may result in electrical shock. Handle all components with care. Inspect regularly for damage to components and cabling.

8. Troubleshooting

If you encounter issues with your Furrion Vision S system, consider the following common troubleshooting steps:

• No Signal/Poor Image:
  • Ensure the camera and monitor are powered on.
  • Check that the camera is receiving power (e.g., RV running lights are on if wired to them).
  • Verify that the camera and monitor are within range and there are no significant obstructions.
  • Re-pair the camera and monitor if necessary (refer to the full user manual for specific steps).
  • Check for physical damage to the camera or antenna.
• Power Issues:
  • Ensure the 12V power adapter is securely plugged into both the monitor and the vehicle's power outlet.
  • Check the vehicle's fuse for the power outlet.
  • If using an adapter for indoor use, ensure it provides the correct voltage (12V).
• Audio Problems:
  • Ensure the microphone on the camera is not obstructed.
  • Check monitor volume settings.

For more detailed troubleshooting or persistent issues, please refer to the full user manual or contact Furrion customer support.

9. Specifications

10. Warranty and Support

For detailed warranty information, please refer to the warranty card included in your product packaging. For additional support, including a downloadable PDF version of the user manual and other product resources, please visit the official Furrion brand store or contact Furrion customer service.

You can access the official User Manual PDF here.

Visit the Furrion Store for more products and support: Furrion Store