Introduction
The LD Systems MIX 10 A G3 is a high-performance active 2-way loudspeaker designed for a wide range of sound reinforcement applications. Featuring a robust 10-inch woofer and a 1-inch Celestion tweeter, it delivers clear and powerful audio. Its integrated 7-channel mixer, 16 DSP effects presets, and Bluetooth audio streaming capabilities provide exceptional versatility for musicians, presenters, and event organizers.
Figure 1: Front and side view of the LD Systems MIX 10 A G3 active loudspeaker.
Setup
1. Unpacking and Inspection
Carefully remove the MIX 10 A G3 from its packaging. Inspect the unit for any signs of damage during transit. The package should include the active 2-way loudspeaker and a power cable. If any components are missing or damaged, contact your dealer immediately.
2. Placement
The MIX 10 A G3 can be used in various configurations:
- Floor Monitor: Position the speaker on its side using the integrated angle for use as a stage monitor.
- Pole Mounting: The speaker features a 35mm pole mount socket for use with standard speaker stands.
- Tabletop: Place the speaker on a stable, flat surface.
Figure 2: The LD Systems MIX 10 A G3 can be used as a floor monitor.
3. Power Connection
Connect the supplied power cable to the AC INPUT on the rear panel of the speaker and then to a suitable mains power outlet. Ensure the power switch is in the OFF position before connecting to power.
4. Audio Connections
The MIX 10 A G3 features a versatile input panel. Refer to Figure 3 for connection points.
- Channels 1-3: XLR/TRS combo inputs for microphones or line-level instruments.
- Channels 4/5: Stereo line inputs (TRS/RCA) for keyboards, media players, or other stereo sources.
- Monitor Output: XLR output for sending the mixed signal to another powered speaker or monitor.
- Speaker Output: Speakon output for connecting a passive extension speaker (e.g., LD Systems MIX 10 G3 passive).
Figure 3: Rear panel connections and controls of the MIX 10 A G3.
Operating Instructions
1. Powering On/Off
After all connections are made, switch the POWER button on the rear panel to the ON position. The power indicator LED will illuminate. Always turn on the MIX 10 A G3 last in your audio chain and turn it off first to prevent pops and clicks.
2. Mixer Controls
The integrated 7-channel mixer provides comprehensive control over your audio sources. Refer to Figure 4 for a detailed view of the control panel.
- GAIN: Adjusts the input sensitivity for each channel. Start with the gain low and gradually increase until the signal is strong without clipping.
- EQ (HIGH/LOW): Tone controls for adjusting the treble and bass frequencies of each channel.
- EFFECT: Controls the amount of effect applied to each channel.
- LEVEL: Adjusts the individual volume of each channel.
- MAIN LEVEL: Controls the overall output volume of the speaker.
- DSP EFFECTS: Select from 16 built-in digital effects (e.g., reverb, delay) using the rotary encoder.
- MONITOR LEVEL: Adjusts the volume of the monitor output.
Figure 4: Detailed view of the MIX 10 A G3 control panel.
3. Bluetooth Pairing
To connect a Bluetooth device (smartphone, tablet):
- Ensure Bluetooth is enabled on your device.
- Press the BLUETOOTH button on the MIX 10 A G3 control panel. The Bluetooth indicator will flash.
- On your device, search for "LD Systems MIX 10 A G3" in the Bluetooth settings and select it to pair.
- Once paired, the indicator will glow solid, and you can stream audio wirelessly.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your MIX 10 A G3.
- Cleaning: Use a soft, dry cloth to clean the exterior. For stubborn dirt, a slightly damp cloth can be used, but ensure no liquid enters the speaker grilles or control panel. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the speaker in a dry, dust-free environment, preferably in its original packaging or a protective cover.
- Ventilation: Ensure adequate airflow around the rear panel to prevent overheating. Do not block ventilation openings.
- Transportation: When transporting, use appropriate cases or covers to protect the speaker from physical damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output. |
|
|
| Distorted sound. |
|
|
| Bluetooth pairing issues. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Product Type | Active 2-way Loudspeaker |
| Model Name | MIX G3 |
| Model Number | LDMIX102AG3 |
| Woofer Size | 10 inches |
| Tweeter | 1 inch Celestion |
| Amplifier Type | Active |
| Max Output Power | 400 Watts |
| Integrated Mixer | 7 Channels |
| DSP Effects | 16 Presets |
| Connectivity | Bluetooth, XLR, TRS, RCA |
| Compatible Devices | Smartphone, Tablet |
| Material | Plastic or Metal |
| Weight | 15 Kilograms |
| Power Source | Cable Electric |
| Mounting Type | Table Mount |
| Special Feature | Integrated Microphone (Note: This refers to microphone input support, not a built-in microphone.) |
Warranty and Support
The LD Systems MIX 10 A G3 comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty card included with your product or visit the official LD Systems website. For technical support, spare parts, or service inquiries, please contact your authorized LD Systems dealer or the manufacturer's customer service department.
You can find more information and support resources on the official LD Systems website: www.ld-systems.com
