DVC UH70400

DVC UH70400 HEPA Exhaust Filter User Manual

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of the DVC Generic Micro Lined HVR Air Model UH70400 HEPA Exhaust Filter. This filter is designed to ensure optimal performance and air filtration for compatible vacuum cleaner models.

2. Product Overview

The DVC UH70400 HEPA Exhaust Filter is a high-efficiency particulate air filter designed to capture microscopic particles, allergens, and pollutants from the air expelled by your vacuum cleaner. It is a critical component for maintaining air quality during vacuuming.

Key Features:

  • HEPA Filtration: Captures 99.97% of airborne particles as small as 0.3 microns.
  • Compatibility: Specifically designed for Hoover WindTunnel Air Bagless Uprights.
  • Replacement Part: Serves as a generic replacement for OEM Part Number 303902001.

Package Contents:

  • 1 x DVC UH70400 HEPA Exhaust Filter

Product Image:

DVC UH70400 HEPA Exhaust Filter

Image: The DVC UH70400 HEPA Exhaust Filter, a rectangular filter with a white pleated HEPA media visible through a plastic frame. The filter is shown from the front, highlighting its structure.

3. Compatibility

This DVC HEPA Exhaust Filter (Model UH70400, Manufacturer Part Number 470879 HR-18205) is compatible with the following Hoover WindTunnel Air Bagless Upright vacuum cleaner models:

  • Hoover WindTunnel Air Bagless Upright UH70400
  • Hoover WindTunnel Air Bagless Upright UH70405

This filter is a generic replacement for OEM Part Number 303902001.

4. Setup and Installation

Follow these steps to properly install the DVC UH70400 HEPA Exhaust Filter into your compatible Hoover WindTunnel Air Bagless Upright vacuum cleaner.

  1. Power Off and Unplug: Before attempting any maintenance or installation, ensure your vacuum cleaner is turned off and unplugged from the electrical outlet to prevent accidental startup.
  2. Locate the Exhaust Filter Compartment: The exhaust filter compartment is typically located on the side or rear of the vacuum cleaner. Refer to your vacuum cleaner's original manual for the exact location if unsure.
  3. Open the Compartment: Press the release latch or tab to open the exhaust filter cover.
  4. Remove the Old Filter: Carefully pull out the old, used exhaust filter. Note its orientation for correct installation of the new filter. Dispose of the old filter responsibly.
  5. Insert the New Filter: Place the new DVC UH70400 HEPA Exhaust Filter into the compartment. Ensure it is seated firmly and correctly, matching the orientation of the filter you removed. The filter should fit snugly without forcing.
  6. Close the Compartment: Close the filter compartment cover until it clicks securely into place.
  7. Resume Operation: Plug in your vacuum cleaner and resume normal operation.

Warning: Do not operate the vacuum cleaner without the exhaust filter properly installed, as this can lead to reduced performance and potential damage to the motor, and may release dust and allergens back into the air.

5. Operating

The DVC UH70400 HEPA Exhaust Filter functions passively as part of your vacuum cleaner's filtration system. Once installed, it continuously filters the air expelled from the vacuum, trapping fine dust, pollen, pet dander, and other allergens before they re-enter your home's air.

  • Optimal Airflow: A clean filter ensures proper airflow through the vacuum, maintaining strong suction power.
  • Air Quality: The HEPA media significantly improves indoor air quality by reducing airborne particulates.

No specific operational steps are required for the filter itself beyond proper installation. Its effectiveness is directly tied to its cleanliness and proper seating within the vacuum.

6. Maintenance

Regular maintenance of your DVC UH70400 HEPA Exhaust Filter is crucial for maintaining your vacuum cleaner's performance and ensuring effective air filtration. While the product specifications mention "Reusable," HEPA exhaust filters are generally designed for replacement rather than washing or cleaning to maintain their filtration efficiency.

Filter Replacement Schedule:

  • It is recommended to replace the HEPA exhaust filter every 6 to 12 months, or more frequently if you use your vacuum cleaner often, have pets, or suffer from allergies.
  • Signs that your filter needs replacement include:
    • Reduced suction power, even after emptying the dust bin.
    • Noticeable odors coming from the vacuum's exhaust.
    • Visible dirt or discoloration on the filter media.

Replacement Procedure:

Refer to the "Setup and Installation" section for detailed steps on how to remove the old filter and install a new one.

Caution: Attempting to wash or clean a HEPA exhaust filter may damage the delicate filter media, reducing its effectiveness and potentially releasing trapped particles. Always replace with a new filter for optimal performance.

7. Troubleshooting

If you experience issues with your vacuum cleaner that might be related to the exhaust filter, consider the following:

  • Reduced Suction: If your vacuum's suction power has decreased, first check if the dust bin is full and empty it. If suction remains low, the exhaust filter might be clogged. Replace the filter as per the "Maintenance" section.
  • Unpleasant Odors: A dirty or old exhaust filter can be a source of unpleasant odors. Replacing the filter often resolves this issue.
  • Dust Escaping from Exhaust: If you notice dust or fine particles escaping from the vacuum's exhaust, ensure the filter is correctly installed and the compartment cover is securely closed. If the issue persists, the filter may be damaged or severely clogged and requires replacement.

For issues unrelated to the exhaust filter, please consult your vacuum cleaner's original user manual or contact the vacuum cleaner manufacturer's support.

8. Specifications

Feature Detail
Brand DVC
Model Number UH70400 (Generic Replacement)
Manufacturer Part Number 470879 HR-18205
OEM Part Number Replacement 303902001
Filtration Type HEPA
Compatible Vacuum Models Hoover WindTunnel Air Bagless Uprights (UH70400, UH70405)
Number of Pieces 1
GTIN (UPC) 704550063620

9. Warranty and Support

Specific warranty information for this DVC replacement filter is not provided in the product details. For warranty inquiries or product support, please refer to the retailer where the product was purchased or visit the official DVC brand store for general information.

DVC Brand Store: Visit the DVC Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.