Bousnic Dog Training Collar User Manual

Introduction

This user manual provides comprehensive instructions for the safe and effective use of your Bousnic Dog Training Collar. Please read this manual thoroughly before operating the device to ensure proper functionality and the well-being of your pet.

Image: The Bousnic Dog Training Collar system, including the remote transmitter and two receiver collars.

Safety Information

Please read and follow the instructions in manual to keep a safe and comfortable wearing.

1. Avoid leaving the collar on the dog for more than 12 hours per day. If it's possible, re-position the collar on the pet's neck every 1 to 2 hours.
2. Never connect a lead to the electronic collar; it will cause excessive pressure on the contacts.
3. Before wearing the collar please make sure put the silicone caps on the metal prongs. Examine the contact area daily for signs of a rash or a sore. If found, discontinue use of the collar until the skin has healed.

We suggest not using the shock mode except in an emergency. When using the shock function, please set level 1 in the beginning and then increase gradually.

Package Contents

The Bousnic Dog Training Collar package includes the following components:

• 1 remote
• 2 receiver collars
• 8 contact points
• 8 silicone caps
• 4 contact spring sheets
• 1 wrist strap
• 1 charging cable
• 1 test light tool
• 1 user manual

Product Features

• Safe, Effective, Humane Training Modes: Offers customized Static Shock (1-16) and Vibration (1-8) levels, along with a standard Tone mode. Adjustable nylon collar fits 8-26 inches in length.
• Indoor & Outdoor Versatility: Remote range up to 1000 feet, suitable for training in various environments. Features a dual channel for simultaneous training of two dogs.
• Premium, Ergonomic Design: Easy-access button sizes and a simpler format for user-friendly operation. Conductive silicone prongs are safe for dog coats and skin.
• Rechargeable, Waterproof Durability: IP67 waterproof rating allows use during swimming or in wet conditions. Lithium-Polymer batteries charge in 2-3 hours and last 15-20 days.
• Convenient Charging: Can be charged with a phone adapter, USB outlet of a power bank, computer, or car. (Adapter not included).

Setup Guide

1. Charging the Devices

Before first use, fully charge both the remote transmitter and the receiver collars. The Lithium-Polymer batteries typically require 2-3 hours for a full charge and can last 15-20 days for the receiver and up to 60 days for the remote on standby.

Image: Illustration of the remote and receiver being charged using a USB cable, compatible with various USB power sources.

2. Attaching Conductive Silicone Caps

To ensure comfort and prevent skin irritation, attach the conductive silicone caps to the metal contact points on the receiver collar. Push them firmly to ensure a tight fit, leaving no space between the silicone and the contact point. This prevents them from coming off easily.

3. Fitting the Collar

Ensure the collar is properly fitted on your dog's neck. It should be snug enough for the contact points to touch the skin, but not so tight as to cause discomfort. You should be able to fit one or two fingers between the collar and your dog's neck. The adjustable nylon collar fits neck girths from 8 to 26 inches, suitable for dogs weighing 15lbs to 120lbs.

Operating the Collar

Training Modes

The Bousnic training collar offers three primary training modes:

• Tone Mode: Provides an audible beep.
• Vibration Mode: Delivers a vibration, adjustable from levels 1-8.
• Static Shock Mode: Provides a static shock, adjustable from levels 1-16. Use this mode cautiously and start at the lowest level.

Image: Visual representation of the Beep, Vibration, and Static Shock modes available on the Bousnic training collar.

Remote Control Overview

The remote features an ergonomic design with clearly labeled buttons for easy operation. It has a control range of up to 1000 feet, allowing for effective training outdoors.

Image: Detailed diagram of the Bousnic remote control and receiver, highlighting components such as the antenna, LED indicator, buttons (Up, Down, Vibration, Beep, Shock, Channel), contact points, and charging ports.

Image: A visual demonstrating the 1000 ft control range of the Bousnic remote, ideal for outdoor dog training.

Dual Channel Operation

The remote supports training two dogs simultaneously using its dual-channel feature. You can switch between Dog 1 and Dog 2 to apply corrections to individual dogs.

Waterproof Design

The receiver collar is rated IP67 waterproof, meaning it can withstand submersion in water. This allows your dog to swim or play in the rain without damaging the device.

Image: A dog swimming while wearing the Bousnic collar, illustrating its IP67 waterproof capability.

Maintenance

To ensure the longevity and proper functioning of your Bousnic Dog Training Collar, follow these maintenance guidelines:

• Clean the collar with water and mild soap regularly.
• Periodically check the contact points and silicone caps for any signs of wear and tear. Replace them if necessary to maintain effectiveness and comfort for your dog.
• Ensure the charging ports are clean and dry before charging.

Troubleshooting

If you encounter issues with your Bousnic Dog Training Collar, consider the following common solutions:

• Collar not responding: Ensure both the remote and receiver are charged and turned on. Check if they are properly paired.
• Weak or no stimulation: Verify the contact points are making proper contact with your dog's skin. The silicone caps should be firmly attached. Trim your dog's fur if it's too thick and interfering with contact. Increase the stimulation level gradually.
• Short remote range: Environmental factors like terrain, weather, and electromagnetic interference can affect range. Try operating in an open area. Ensure the remote's antenna is not obstructed.
• Difficulty pairing: Follow the pairing instructions in the manual carefully. Note that some users have reported issues with pairing both collars to separate channels; ensure you follow the specific pairing instructions for dual-dog use.
• Skin irritation: Remove the collar immediately if you notice any redness or sores. Clean the area and allow it to heal. Ensure the collar is not too tight and is repositioned frequently (every 1-2 hours).

Specifications

Warranty

Bousnic offers a lifetime warranty for this product. Please refer to the warranty card included in your package for details on how to register and claim warranty services.

Support

For further assistance, technical support, or customer service inquiries, please visit the official BOUSNIC Store on Amazon or refer to the contact information provided in your product packaging.

Visit the BOUSNIC Store