1. Introduction
This manual provides instructions for the COOSPO ANT+ USB Stick Dongle Receiver Adapter, Model RC401-cs. This device enables your computer to receive live ANT+ sports, fitness, and health data from various ANT+ sensors, enhancing your virtual training experience.
2. Product Overview
The COOSPO ANT+ USB Stick is a compact receiver designed to bridge your ANT+ compatible fitness devices with your computer. It allows for seamless data transfer for various metrics.
Image: A hand holding the compact COOSPO ANT+ USB Stick Dongle, illustrating its small size.
Image: The COOSPO ANT+ USB Stick Dongle displayed with the ANT+ logo and radiating signal waves, indicating its wireless data reception capability.
3. Setup Instructions
Follow these steps to set up your COOSPO ANT+ USB Stick Dongle:
- Connect the Dongle: Simply plug the ANT+ dongle into an available USB port on your computer (desktop or laptop).
- Driver Installation: In most cases, your operating system (Windows or macOS) will automatically recognize and install the necessary drivers. If prompted, allow the system to install drivers. If automatic installation fails, please refer to the 'Product Guide and Documents' section on the product detail page for manual driver installation instructions.
- Software Configuration: Once the dongle is recognized, open your preferred ANT+ compatible software (e.g., Zwift, TrainerRoad, Bkool). Navigate to the device pairing or sensor settings within the software and search for ANT+ devices.
- Pair Devices: Ensure your ANT+ fitness sensors (heart rate monitor, speed/cadence sensor, power meter, smart trainer) are active and within range of the dongle. Select your devices from the list in the software to pair them.
Image: The COOSPO ANT+ USB Stick Dongle securely plugged into a laptop's USB port, ready for use.
Image: Icons representing compatibility with various operating systems, including Microsoft Windows (32/64 Bit, 10, 8, 7, XP/Vista) and Mac OS X.
4. Operating Instructions
The COOSPO ANT+ USB Stick Dongle facilitates the transfer of fitness data to your computer for analysis and virtual training.
4.1. Broad Software Compatibility
This dongle works with a wide range of Windows and MacBook software programs, including but not limited to:
- Zwift
- Elite
- Bkool Cycling Simulator
- Cadence Virtual Reality
- Tacx
- Cycling Simulator - OSX
- CycleOps Virtual Trainer
- TrainerRoad
- Sufferfest
- PerfPRO Studio
- Rouvy
- Virtual Runner
- PowerBeatsVR
- VRide
Note: The specific sensors compatible with your setup are determined by the software program you use. Always confirm compatibility with the software developer.
4.2. Garmin Device Integration
The dongle automatically uploads workout files from selected Garmin devices to Garmin Connect or Training Center. Compatible Garmin devices include:
- Garmin Edge: 1030, 130, 25, 520, 530, 820, 830
- Garmin Forerunner: 310XT, 405, 405CX, 410, 610, 910XT
4.3. Data Transfer Capabilities
The dongle seamlessly transfers various types of fitness data, including:
- Bicycle Cadence (CAD)
- Bicycle Speed (SPD)
- Bicycle Speed & Cadence (S&C)
- Bicycle Power (PWR)
- Heart Rate (HR)
- Fitness Equipment Controls (FE-C)
Image: A diagram showing the setup for a bike trainer, where a bicycle is placed on a trainer, an ANT+ dongle is used to connect devices, and Zwift software is downloaded to a Mac or PC for virtual cycling.
Image: A collage showing various indoor cycling and fitness setups where the ANT+ dongle is central to connecting sensors and displaying data on a computer or screen.
5. Maintenance
To ensure the longevity and optimal performance of your COOSPO ANT+ USB Stick Dongle, follow these simple maintenance guidelines:
- Keep Dry: Avoid exposing the dongle to moisture, rain, or liquids.
- Clean Gently: If necessary, clean the exterior of the dongle with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Store Properly: When not in use, store the dongle in a cool, dry place, away from direct sunlight and extreme temperatures.
- Handle with Care: Avoid dropping the dongle or subjecting it to strong impacts.
6. Troubleshooting
If you encounter issues with your ANT+ USB Stick Dongle, consider the following troubleshooting steps:
6.1. Connectivity Issues
- Check USB Connection: Ensure the dongle is firmly plugged into a functional USB port on your computer. Try a different USB port if available.
- Verify Drivers: Confirm that the necessary drivers are correctly installed. Check your computer's Device Manager (Windows) or System Information (macOS) to see if the dongle is recognized without errors. Reinstall drivers if needed, referring to the product detail page.
- Device Proximity: Ensure your ANT+ fitness devices are within close range of the dongle (typically a few meters) and are powered on and active.
- Software Settings: Double-check the device pairing settings within your fitness software. Ensure ANT+ is enabled and the software is actively searching for devices.
- Interference: Minimize potential interference from other wireless devices (Wi-Fi routers, Bluetooth devices) by moving them further away or using a USB extension cable to position the dongle closer to your ANT+ sensors.
6.2. Software Compatibility
- Confirm Support: If a specific sensor or feature is not working, verify with the software developer that their application fully supports your particular ANT+ device and the data type you are trying to transfer.
- Software Updates: Ensure your fitness software is updated to the latest version, as updates often include improved ANT+ compatibility and bug fixes.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | CooSpo |
| Model | RC401-cs |
| Item Model Number | RC401-cs |
| Item Number | 010-01058-00, 010-10999-00 |
| Product Dimensions | 1.8 x 1.5 x 1.1 cm |
| Item Weight | 10 g |
| Hardware Interface | USB |
| Interface Type | ANT+ |
| Operating System | Mac, Windows (Compatible OS Family: MacOS, Windows) |
| Compatible Peripherals | Desktop Computer |
| Additional Features | ANT USB Stick |
| Batteries Included? | No |
| Batteries Required | No |
| Data Transfer Rate | 60 Megabit per second |
| Data Link Protocol | USB |
| Global Trade Identification Number (GTIN) | 06970083720079 |
8. Warranty and Support
For information regarding the product warranty, please refer to the warranty card included with your purchase or contact the seller directly. Warranty terms may vary by region and retailer.
If you require technical assistance or have questions not covered in this manual, please contact COOSPO customer support or the authorized retailer from whom you purchased the product. You can often find support contact information on the manufacturer's official website.
