1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Lexmark 52D0Z00 Return Program Imaging Unit. This imaging unit is designed to work seamlessly with compatible Lexmark printers, ensuring optimal print quality and performance. By utilizing genuine Lexmark supplies, you contribute to environmental sustainability through the Lexmark Return Program.
2. Product Overview
Figure 1: Lexmark 52D0Z00 Return Program Imaging Unit (2-Pack) with packaging.
This image displays two Lexmark 52D0Z00 imaging units, each accompanied by its black and white retail box. The units are shown partially removed from their packaging, highlighting their design and the "520Z" label on the box.
Figure 2: Detailed view of the Lexmark 52D0Z00 Imaging Unit.
A close-up shot of the Lexmark 52D0Z00 imaging unit, revealing its internal components, including the green-colored roller and various mechanical parts. This view provides a clear perspective of the unit's intricate design.
The Lexmark 52D0Z00 is a genuine Lexmark imaging unit designed for high-volume printing environments. Each unit is engineered to deliver consistent, high-quality output and has an approximate yield of 100,000 pages.
3. Compatibility
This imaging unit is compatible with the following Lexmark printer models:
- Lexmark MS710
- Lexmark MS810
- Lexmark MS811
- Lexmark MS812
- Lexmark MX710
- Lexmark MX711
- Lexmark MX810
- Lexmark MX811
- Lexmark MX812
4. What's in the Box
Your package should contain the following items:
- Two (2) Lexmark 52D0Z00 Return Program Imaging Units
5. Setup and Installation
Follow these steps to install the Lexmark 52D0Z00 imaging unit into your compatible Lexmark printer. Refer to your printer's specific user manual for detailed instructions on accessing the imaging unit compartment.
- Power Off Printer: Ensure your printer is powered off and unplugged from the electrical outlet before beginning installation.
- Open Access Door: Locate and open the front or side access door of your printer to expose the imaging unit and toner cartridge area.
- Remove Old Unit (if applicable): If replacing an existing imaging unit, carefully grasp the handle of the old unit and pull it straight out of the printer. Place it in a protective bag for return.
- Unpack New Unit: Remove the new Lexmark 52D0Z00 imaging unit from its packaging. Avoid touching the green drum surface or electrical contacts.
- Insert New Unit: Align the new imaging unit with the guides inside the printer. Gently push the unit straight into the printer until it clicks securely into place.
- Close Access Door: Close the printer's access door.
- Power On Printer: Plug in and power on your printer. The printer will typically perform a self-test and recognize the new imaging unit.
Important: Always handle the imaging unit by its designated handles. Do not expose the drum to direct sunlight or strong indoor light for extended periods, as this can damage the unit.
6. Operating Information
The Lexmark 52D0Z00 imaging unit is designed for high-performance printing. Key operational aspects include:
- Page Yield: Each imaging unit has an approximate yield of 100,000 pages. Actual yield may vary significantly based on print content, average print job size, print mode, and media type.
- Return Program: This imaging unit is part of the Lexmark Return Program. This means the unit is sold at a special price on condition that it will be used only once and returned only to Lexmark for remanufacturing or recycling.
- Print Quality: For optimal print quality, always use genuine Lexmark toner cartridges with this imaging unit.
7. Maintenance and Care
Proper care of your imaging unit can extend its lifespan and maintain print quality:
- Storage: Store new imaging units in their original, unopened packaging in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: When handling the imaging unit, avoid touching the green drum surface. Fingerprints or oils can degrade print quality.
- Cleaning: Do not attempt to clean the imaging unit's drum or internal components with liquids or abrasive materials. If necessary, gently wipe the exterior with a dry, lint-free cloth.
- Replacement: Replace the imaging unit when your printer indicates it is low or empty, or when print quality significantly degrades despite using a new toner cartridge.
8. Troubleshooting
If you encounter issues with your imaging unit, consider the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor print quality (streaks, faded prints, spots) | Worn-out imaging unit, damaged drum, non-genuine toner. | Replace the imaging unit. Ensure you are using genuine Lexmark toner. Check for any visible damage on the drum. |
| "Replace Imaging Unit" message | Imaging unit has reached its end of life. | Replace the imaging unit with a new Lexmark 52D0Z00 unit. |
| Unit not recognized by printer | Improper installation, faulty unit, dirty contacts. | Reinstall the imaging unit, ensuring it is seated correctly. Gently clean the electrical contacts on the unit and in the printer with a dry, lint-free cloth. |
If problems persist after following these steps, consult your printer's user manual or contact Lexmark support.
9. Specifications
| Attribute | Detail |
|---|---|
| Brand | Lexmark |
| Model Number | 52D0Z00 (BND00062) |
| Item Weight | 9.98 pounds (approx. 4.53 kg) |
| Product Dimensions | 19.35 x 15.45 x 13.6 inches (approx. 49.15 x 39.24 x 34.54 cm) |
| Color | 2 Pack Black |
| Material Type | Plastic |
| Number of Items | 2 (in this pack) |
| Approximate Page Yield | 100,000 pages |
10. Warranty and Support
For information regarding the warranty of your Lexmark 52D0Z00 Return Program Imaging Unit, please refer to the warranty documentation included with your printer or visit the official Lexmark website. Lexmark provides support for genuine Lexmark products.
Lexmark Official Website: www.lexmark.com
For technical assistance or to inquire about the Lexmark Return Program, please contact Lexmark Customer Support through their website or the contact information provided in your printer's documentation.
