PowerLocus P2

PowerLocus P2 Bluetooth Over-Ear Headphones User Manual

Model: P2 | Brand: PowerLocus

Introduction

Thank you for choosing PowerLocus P2 Bluetooth Over-Ear Headphones. These wireless stereo headphones are designed to provide a premium audio experience with versatile connectivity options and superior comfort. This manual will guide you through the setup, operation, and maintenance of your new headphones.

PowerLocus P2 Rose Gold Headphones and Carrying Case

Image: PowerLocus P2 Rose Gold Headphones with their protective carrying case.

What's Included

  • 1x PowerLocus P2 Wireless Headphones
  • 1x 3.5mm Audio Cable
  • 1x USB-C Charging Cable
  • 1x Protective Hard Shell Carry Case
Contents of PowerLocus P2 headphone package

Image: All included accessories: headphones, 3.5mm audio cable, USB charging cable, and hard shell case.

Setup Guide

1. Charging the Headphones

Before first use, ensure your PowerLocus P2 headphones are fully charged. Use the provided USB-C charging cable to connect the headphones to a power source (e.g., computer USB port, wall adapter). The charging time is approximately 2.5 hours.

A red indicator light will typically show during charging and turn off or change color when fully charged.

2. Bluetooth Pairing

  1. Ensure the headphones are turned off.
  2. Slide the On/Off button to the "On" position. The headphones will enter pairing mode, indicated by a blinking blue light.
  3. On your device (smartphone, tablet, laptop), go to Bluetooth settings and enable Bluetooth.
  4. Search for available devices and select "PowerLocus P2" from the list.
  5. Once connected, the blue light on the headphones will stop blinking and remain solid.

The headphones are compatible with all Bluetooth-enabled devices, including iPhone, Samsung Galaxy, iPad, iPod, Huawei, Nexus, Amazon Fire Tablet, Desktops, Laptops, iOS, Android, TV, PS4, Xbox, and Nintendo.

Operating Instructions

Controls Overview

The controls are located on the right earcup for easy access.

Close-up of PowerLocus P2 headphone controls

Image: Detailed view of the control buttons on the right earcup.

  • Power Button: Slide to turn On/Off.
  • Volume Up/Next Track: Short press for volume up, long press for next track.
  • Volume Down/Previous Track: Short press for volume down, long press for previous track.
  • Multi-function Button (Play/Pause/Call): Press to play/pause music, answer/end calls. Long press to reject calls.
  • Mode Button (M): Press to switch between Bluetooth, FM Radio, and Micro SD/TF card modes.

Connectivity Modes

  • Wireless (Bluetooth 5.3): Enjoy up to 15 hours of playtime with a range of up to 36 feet.
  • Wired (3.5mm Audio Cable): Connect the provided 3.5mm audio cable to the headphone jack for non-stop music playback, even when the battery is depleted.
  • Micro SD/TF Card: Insert a Micro SD or TF card into the dedicated slot to play music directly from the card.
  • FM Radio: Switch to FM radio mode to listen to local radio stations.
PowerLocus P2 headphones with 3.5mm audio cable inserted

Image: The 3.5mm audio cable being inserted into the headphone jack for wired use.

Maintenance

Cleaning

To maintain the quality and longevity of your headphones, gently wipe the earcups and headband with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.

Storage

When not in use, fold the headphones and store them in the provided protective hard shell case. This will prevent scratches and damage, especially during travel.

PowerLocus P2 headphones folded and stored in their case

Image: Folded PowerLocus P2 headphones neatly stored inside their compact carrying case.

Troubleshooting

ProblemPossible Solution
Headphones won't turn on.Ensure the headphones are charged. Connect them to a power source using the USB-C cable.
Cannot pair via Bluetooth.
  • Ensure headphones are in pairing mode (blinking blue light).
  • Make sure Bluetooth is enabled on your device.
  • Move headphones closer to your device (within 36 feet).
  • Forget "PowerLocus P2" from your device's Bluetooth list and try pairing again.
  • Restart both headphones and your device.
No sound or low volume.
  • Adjust volume on both headphones and your connected device.
  • Ensure the 3.5mm audio cable is fully inserted if using wired mode.
  • Check if the correct input mode (Bluetooth, Wired, SD/TF, FM) is selected.
"Low battery" voice prompt.This indicates the battery is low. Charge the headphones immediately. You can switch to wired mode to continue listening while charging.

Specifications

FeatureDetail
Model NameP2
Connectivity TechnologyWireless (Bluetooth), Wired (3.5mm Jack)
Wireless Communication TechnologyBluetooth 5.3
Bluetooth Range36 Feet
Noise ControlSound Isolation
Frequency Response20 Hz - 20,000 Hz
Sensitivity110 dB
Impedance32 Ohm
Audio Driver Size40 Millimeters
Battery Life15 Hours
Charging Time2.5 Hours
Item Weight5.8 ounces (165 Grams)
Product Dimensions6.7 x 6.7 x 3.33 inches
MaterialLeather
Special FeaturesAdjustable Headband, Foldable, Lightweight, Noise Isolation

Warranty and Support

PowerLocus P2 headphones come with a 24-month PowerLocus warranty. For any questions or support, please contact our customer service team, available 24/7, for 100% customer satisfaction.

For further assistance, please visit the official PowerLocus website or refer to the contact information provided with your product packaging.

Related Documents - P2

Preview PowerLocus P2 User Manual: Features, Operation, and Safety
Comprehensive user manual for the PowerLocus P2 headphones, detailing product features, pairing instructions, audio modes, charging, and safety guidelines. Includes technical specifications and compliance information.
Preview PowerLocus P6 User Manual
User manual for the PowerLocus P6 headphones, detailing product parameters, features, and operation.
Preview PowerLocus P7 Wireless Headphones User Manual
Comprehensive user manual for the PowerLocus P7 wireless headphones. Learn about specifications, Bluetooth pairing, button controls, charging, troubleshooting, and safety guidelines.
Preview PowerLocus Move | Jumpy Open Ear Headphones User Manual
User manual for the PowerLocus Move | Jumpy Open Ear Headphones, providing instructions on setup, usage, safety, technical specifications, and compliance information.
Preview PowerLocus P4 Wireless Headphones User Manual and Specifications
Comprehensive user manual for PowerLocus P4 wireless headphones, covering setup, Bluetooth pairing, charging, technical specifications, safety, and disposal. Features Hi-Fi stereo sound and long battery life.
Preview PowerLocus Multi-function / 4in1 Wireless Stereo Headphones User Manual
This user manual provides comprehensive instructions for the PowerLocus Multi-function / 4in1 Wireless Stereo Headphones, covering product indication, power on/off, pairing, MP3/FM functions, call handling, charging, wired mode, and precautions.