Picket House EG170QB

Download PDF
Contents

Picket House Furnishings Madison Queen Storage Bed

Model: EG170QB | Brand: Picket House

Introduction

Thank you for purchasing the Picket House Furnishings Madison Queen Storage Bed. This manual provides detailed instructions for the safe assembly, proper use, and maintenance of your new bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Safety Information

  • Always assemble the bed on a soft, clean surface to prevent scratches.
  • Ensure all hardware is securely tightened before use. Periodically check and re-tighten as necessary.
  • Do not allow children to climb on the bed or play with the drawers unsupervised.
  • Keep small parts and plastic bags away from children to prevent choking hazards.
  • Do not exceed the recommended weight capacity for a queen-sized bed.
  • Use only the mattress size specified (Queen).

Package Contents

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

  • Headboard with integrated shelves and drawers
  • Footboard with integrated drawers
  • Side Rails (2) with integrated drawers
  • Bed Slats and support legs
  • Hardware pack (screws, bolts, washers, Allen wrench)
  • Assembly Instructions (this manual)

Tools Required (Not Included): Phillips head screwdriver, Hammer (optional, for slat caps).

Setup and Assembly Instructions

Follow these steps carefully for proper assembly. It is recommended that two adults assemble this bed.

  1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Refer to the parts list (if provided separately) to identify each piece.
  2. Assemble Headboard Drawers and Shelves: If the headboard drawers are not pre-assembled, follow the specific instructions for attaching the drawer slides and assembling the drawer boxes. Insert the drawers into the headboard compartments.
  3. Attach Side Rails to Headboard: Align the side rails with the pre-drilled holes on the headboard. Secure them using the provided bolts and washers. Do not fully tighten until all major components are connected.
  4. Attach Side Rails to Footboard: Connect the other end of the side rails to the footboard using the provided hardware. Ensure the footboard drawers are properly aligned and functional.
  5. Install Bed Slats: Place the bed slats across the side rails. Secure them using the provided screws or clips. Ensure even spacing for proper mattress support. Attach any central support legs to the slats if included.
  6. Tighten All Hardware: Once all components are in place, go back and securely tighten all bolts and screws. Do not overtighten.
  7. Insert Side Rail Drawers: If not already in place, insert the drawers into the side rail compartments.
  8. Place Mattress: Position your queen-sized mattress directly onto the bed slats. The bed does not require a box spring.
Picket House Furnishings Madison Queen Storage Bed with dimensions

Image 1: Fully assembled Picket House Furnishings Madison Queen Storage Bed, illustrating overall dimensions (93"L x 63"W x 56"H).

Operating Instructions

The Madison Queen Storage Bed features integrated storage solutions for convenience.

  • Headboard Storage: The headboard includes two open shelves and two drawers. Use these for storing books, small electronics, or personal items.
  • Footboard Drawers: The footboard contains four spacious drawers. These are ideal for linens, clothing, or other bedroom essentials.
  • Side Rail Drawers: Each side rail features one drawer, providing additional accessible storage.

To open drawers, gently pull the silver knobs. To close, push firmly until the drawer is fully seated. Avoid overloading drawers to ensure smooth operation and prevent damage to the slides.

Front view of Madison Queen Storage Bed with drawers open

Image 2: Front view of the Madison Queen Storage Bed, showcasing the footboard drawers and headboard storage compartments.

Maintenance

  • Cleaning: Wipe the wood surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as they may damage the finish.
  • Dusting: Regularly dust the bed with a dry, soft cloth to prevent buildup.
  • Hardware Check: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain stability.
  • Drawer Care: Keep drawer slides clean and free of debris. If drawers become stiff, a small amount of silicone lubricant can be applied to the slides.

Troubleshooting

  • Bed feels wobbly: Check all assembly hardware. Ensure all bolts and screws are fully tightened.
  • Drawers stick or do not close smoothly: Ensure drawers are not overloaded. Check for any obstructions in the drawer slides. Verify that the drawer slides are properly aligned and secured.
  • Squeaking noises: This can often be resolved by re-tightening all hardware, especially around the bed frame joints and slat connections.

Specifications

FeatureDetail
Model NumberEG170QB
SizeQueen
Product Dimensions (L x W x H)93" x 63" x 56"
ColorGrey
MaterialWood
Finish TypeWood
Item Weight276 pounds
Assembly RequiredYes
Compatible Mattress SizeQueen (No Box Spring Required)
Storage Features2 Headboard Shelves, 2 Headboard Drawers, 4 Footboard Drawers, 2 Side Rail Drawers

Warranty Information

Picket House Furnishings products are manufactured with quality and care. For specific warranty details regarding your Madison Queen Storage Bed, please refer to the warranty card included with your purchase or visit the official Picket House Furnishings website. Keep your proof of purchase for any warranty claims.

Customer Support

If you have any questions, require assistance with assembly, or need to report missing or damaged parts, please contact Picket House Furnishings customer support. Contact information can typically be found on the product packaging or the official brand website.

Online Support: www.pickethousefurnishings.com

© 2024 Picket House Furnishings. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.