CRT FP00 Dual Band VHF/UHF Handheld Transceiver User Manual

Introduction

This manual provides comprehensive instructions for the proper use, setup, operation, and maintenance of your CRT FP00 Dual Band VHF/UHF Handheld Transceiver. Please read this manual thoroughly before operating the device to ensure safe and efficient use.

Package Contents

Upon opening the package, verify that all components listed below are present and in good condition:

Portable UHF/VHF Station
Antenna
Belt Clip Support
User Manual
Desktop Charger
1 Li-Ion Battery (1600mAh)
Hand Strap

All components of the CRT FP00 radio laid out, including the radio unit, antenna, battery, desktop charger, belt clip, and hand strap.

Image: All components included with the CRT FP00 Dual Band Handheld Transceiver.

Product Overview

Two CRT FP00 handheld transceivers, one yellow and one black, shown side-by-side with antennas extended.

Image: The CRT FP00 Dual Band Handheld Transceiver in black and yellow variants.

The CRT FP00 is a compact and versatile dual-band handheld transceiver designed for reliable communication. It operates across VHF (136-174 MHz) and UHF (400-470 MHz) frequency bands, offering 128 channels for diverse communication needs. Key features include adjustable power output, CTCSS/DCS codes for privacy, VOX function, and an FM radio receiver.

Frequency Bands: VHF (136-174 MHz) and UHF (400-470 MHz)
Channels: 128
Security Codes: 208 DCS and 50 CTCSS
Adjustable Power: Hi/Low (VHF: 1W/5W, UHF: 1W/4W)
Functions: VOX, Battery Level Indicator, Channel Scan, Keypad Lock, Programmable
Additional Features: Built-in Lantern, FM Radio, SMA Antenna Connector, Time-out Timer, Busy Channel Lockout, Amplifier, Channel Monitoring
Display: Multi-color screen (Red, Orange, Green)
Frequency Steps: 2.5 / 5 / 6.25 / 10 / 12.5 / 25 KHz

Setup

1. Battery Installation and Charging

Align the 1600mAh Li-Ion battery with the battery compartment on the back of the transceiver.
Gently push the battery into place until it clicks securely.
To charge, place the transceiver with the battery installed into the desktop charger. Ensure the charging contacts align.
Connect the desktop charger to a power outlet. The charging indicator light will illuminate.
Charge the battery fully before first use (approximately 4-5 hours). The indicator light will change when charging is complete.

2. Antenna Attachment

Locate the SMA antenna connector on the top of the transceiver.
Screw the provided antenna clockwise onto the connector until it is finger-tight. Do not overtighten.

3. Belt Clip and Hand Strap Installation

Attach the belt clip to the designated slot on the back of the transceiver using the provided screws (if applicable).
Thread the hand strap through the loop on the top or side of the transceiver for secure carrying.

Operating Instructions

1. Power On/Off and Volume Control

To power on, rotate the top-mounted knob clockwise. The display will illuminate.
Continue rotating the knob to adjust the volume.
To power off, rotate the knob counter-clockwise until it clicks.

2. Channel Selection

Use the UP/DOWN arrow keys on the keypad to navigate through the 128 available channels.
Alternatively, enter the desired channel number directly using the numeric keypad.

3. Transmitting and Receiving

To transmit, press and hold the Push-to-Talk (PTT) button on the side of the transceiver. Speak clearly into the microphone.
Release the PTT button to return to receive mode.
Ensure you are on the same frequency/channel as the party you wish to communicate with.

4. Function Menu Navigation

Press the MENU button to access the main menu.
Use the UP/DOWN arrow keys to scroll through menu options.
Press MENU again or ENTER to select an option.
Press EXIT or BACK to return to the previous screen or exit the menu.

5. Keypad Lock

To lock the keypad, press and hold the # key.
Repeat the action to unlock the keypad.

Maintenance

Cleaning: Use a soft, damp cloth to clean the exterior of the transceiver. Do not use harsh chemicals or abrasive cleaners.
Battery Care:
- Avoid overcharging or completely discharging the Li-Ion battery.
- Store the battery in a cool, dry place when not in use for extended periods.
- If the battery performance degrades significantly, replace it with an original CRT replacement battery.
Antenna: Ensure the antenna is securely attached. Do not bend or force the antenna, as this can damage the connector.
Storage: When storing the transceiver for a long time, remove the battery and store both in a dry, temperature-controlled environment.

Troubleshooting

Problem	Possible Cause	Solution
No power	Battery discharged or not properly installed.	Charge the battery fully. Ensure the battery is correctly seated in the compartment.
Cannot transmit or receive	Incorrect frequency/channel. Antenna not connected. Low battery.	Verify frequency/channel settings. Ensure antenna is securely attached. Recharge battery.
Poor audio quality	Weak signal. Volume too low/high. Obstructions.	Move to an area with better signal. Adjust volume. Reduce obstructions between transceivers.
Keypad unresponsive	Keypad lock is active.	Press and hold the # key to unlock the keypad.

Specifications

Feature	Detail
Model Number	CRT FP00: NOIR
Brand	CRT
Frequency Range	VHF: 136-174 MHz, UHF: 400-470 MHz
Number of Channels	128
Security Codes	208 DCS, 50 CTCSS
Output Power	VHF: 1W/5W, UHF: 1W/4W
Battery Type	1600mAh Li-Ion (included)
Voltage	7.2 Volts
Dimensions (H x W x D)	122 x 63 x 36 mm (4.8 x 2.5 x 1.4 inches)
Weight (with battery)	280 g (0.62 lbs)
Operating Temperature	-26°C to +60°C (-14.8°F to +140°F)
Antenna Connector	SMA
Audio Accessory Port	2-pin Kenwood type

Warranty and Support

The CRT FP00 Dual Band Handheld Transceiver comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact your local CRT distributor.

For technical support, service, or inquiries regarding replacement parts, please contact CRT customer service through their official website or the contact information provided at the point of purchase. Please have your model number (CRT FP00: NOIR) and purchase date available when contacting support.

Close-up of the black CRT FP00 handheld transceiver with a graphic overlay indicating a 2-year warranty and various features in French.

Image: Product packaging highlighting a 2-year warranty.

	CRT MICRON U/V Dual Band Transceiver User Manual Comprehensive user manual for the CRT MICRON U/V dual band transceiver, covering installation, operation, features, maintenance, and specifications. Includes details on frequency ranges, channel setup, CTCSS/DCS, scanning, and troubleshooting.
	CRT Alpha CB Radio User Manual - Operation and Specifications Official user manual for the CRT Alpha CB Radio. Find detailed information on features, installation, operation, specifications, safety, and troubleshooting for your CRT Alpha transceiver.
	Manuel d'Utilisation CRT HERCULE TURBO : Spécifications et Opération Manuel d'utilisation complet pour le transceiver radio amateur CRT HERCULE TURBO. Ce document détaille l'installation, les spécifications techniques, les fonctions du panneau avant et arrière, les modes de fonctionnement, la sélection de fréquence, le scan, la fonction split, la gestion de la mémoire, le contrôle SWR, et inclut le schéma électronique.
	CRT SS8900 10 Meter Amateur Radio User Manual Comprehensive user manual for the CRT SS8900 10 Meter Amateur Radio, covering features, installation, operation, specifications, and troubleshooting. Includes detailed instructions and technical data.
	CRT SS 8900 10 Meter Amateur Radio User Manual User manual for the CRT SS 8900 10 Meter Amateur Radio, covering installation, operation, features, button functions, display indicators, specifications, and compliance information.
	CRT SS 9900v User Manual Comprehensive user manual for the CRT SS 9900v 10 Meter Radio, covering functions, installation, operation, specifications, and guarantee information.

CRT CRT FP00: NOIR