1. Introduction
This manual provides detailed instructions for the operation and maintenance of your ANCEL FX6000 All System OBD2 Diagnostic Scan Tool. The FX6000 is designed to offer comprehensive diagnostic functions for various automotive systems, ensuring efficient vehicle maintenance and repair.
2. Product Overview
The ANCEL FX6000 is a professional diagnostic scan tool equipped with multiple OBD connectors for extensive vehicle compatibility. It supports all OBDII modes and offers various special functions.
Figure 2.1: ANCEL FX6000 Diagnostic Scan Tool and included OBD connectors. The image displays the main unit with a screen and buttons, along with various OBD-II and OBD-I adapter cables for different vehicle makes and models.
2.1 Key Features
- Comprehensive Diagnostic Functions: Capable of diagnosing all major vehicle systems.
- OBD2 Diagnostic Support: Full support for all OBDII diagnostic modes.
- Extensive Vehicle Coverage: Compatible with a wide range of vehicle makes and models, including those requiring specific OBD-I connectors.
- Multi-Language Interface: Supports multiple languages for user convenience.
3. Setup and Initial Use
3.1 Unpacking and Inspection
Upon receiving your ANCEL FX6000, carefully unpack all components. Verify that the main unit, OBD-II cable, and all specified OBD-I connectors are present. Inspect for any visible damage.
3.2 Connecting the Device
- Connect the appropriate OBD cable to the ANCEL FX6000 main unit.
- Locate the vehicle's OBD-II port (typically under the dashboard on the driver's side) or the specific OBD-I port for older vehicles.
- Connect the other end of the cable to the vehicle's diagnostic port. The device is powered by the vehicle's 12V/2A OBDII data link connector.
3.3 Software Updates
It is recommended to update the device software before initial use to ensure access to the latest vehicle data and features. The USB cable is used for updates only, not for reading version information.
- Connect the scan tool to a PC using the USB cable. Ensure the PC recognizes two disks: ANCEL-1(F:) and ANCEL-2(E).
- Download the update software from the official ANCEL website.
- If using Windows 10 or other systems with antivirus software, temporarily disable protection before the update is finished.
- Follow the on-screen instructions of the update software. If issues occur, try a different USB cable (e.g., a printer cable).
Note:
- The FX6000 is not a touchscreen tool; navigate using the physical buttons.
- To find the serial number, plug the unit into your car and navigate to the "About" section on the main interface, or check the unit's back.
4. Operating Instructions
The ANCEL FX6000 offers various diagnostic and special functions. Navigate through the menus using the directional buttons and the "OK" button.
Video 4.1: ANCEL FX6000 All System Scan Tool with 11 OBD Connectors. This video demonstrates the physical components of the FX6000, its various connectors, and key operational features such as all-system diagnosis, special functions, reading and clearing fault codes, and I/M readiness checks. It highlights the device's multi-language support and wide vehicle compatibility.
4.1 System Diagnosis
The FX6000 can diagnose all major vehicle systems. After connecting the tool to the vehicle:
- Select "Diagnose" from the main menu.
- Choose the specific vehicle make and model.
- Select "All Systems" or a specific system (e.g., Engine, Transmission, ABS, SRS, EPB, TPMS, etc.) for diagnosis.
- The tool will scan the selected system(s) for trouble codes and display live data.
4.2 OBDII Modes
The tool supports all OBDII diagnostic modes, including:
- Read Current Trouble Code
- Clear Trouble Code
- Read Current Data (Live Data Stream)
- Read Pending Trouble Code
- Read Freeze Frame Data
- Readiness Tests (I/M Readiness)
- On-Board Monitoring Test
- And more.
4.3 Special Functions
The FX6000 offers various special functions depending on the vehicle model, which may include:
- Oil Light Reset
- Injector Coding
- TPMS Reset
- IMMO Service
- ABS Bleeding
- DPF Reset
- EPB Reset (Electronic Parking Brake)
- SAS Reset (Steering Angle Sensor)
- Component Test
- Suspension Reset
- Instrument Cluster functions
- Transmission adaptations
Note:
- Online coding is available for some car models.
- Bidirectional and active tests are available for some car models.
- The availability of specific reset functions depends on what is installed on the vehicle's system by the manufacturer.
5. Maintenance
To ensure the longevity and optimal performance of your ANCEL FX6000:
- Keep the device clean and free from dust and moisture.
- Store the tool in its protective case when not in use.
- Regularly check for and install software updates to maintain compatibility and access new features.
- Avoid exposing the device to extreme temperatures or direct sunlight.
6. Troubleshooting
6.1 Device Not Reading Version Information in USB Mode
The USB cable is exclusively for software updates. To read version information (serial number), connect the device to a vehicle and navigate to the "About" section on the main interface.
6.2 Incomplete Parameter Display (MCUID)
If the screen displays an "Incomplete parameter (MCUID)" message:
- Ensure the scan tool is connected to your PC with the USB cable and that both ANCEL-1(F:) and ANCEL-2(E) disks are displayed.
- Verify that the software has been downloaded correctly.
- If using Windows 10 or other systems with antivirus software, temporarily close the antivirus software before the update is finished.
6.3 Software Update Issues
If the ANCEL Update Software cannot be installed correctly:
- Ensure the PC and the ANCEL scanner are connected via USB cable before the software is downloaded and installation is attempted.
- Try using a different USB cable, such as a printer cable, as some cables may not provide stable data transfer.
6.4 Device Not Connecting to ECU
If the device fails to connect to the Electronic Control Unit (ECU) for certain modules or vehicles:
- Ensure the ignition is ON and the engine is OFF when attempting to clear fault codes.
- Verify that the correct vehicle make and model are selected in the tool's menu.
- Confirm that the diagnostic cable is securely connected to both the tool and the vehicle's OBD port.
- Some advanced functions or module access may not be supported on all vehicle models or years. Refer to the product's compatibility list for specific limitations.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | ANCEL |
| Model Number | FX6000 |
| Item Weight | 3.3 pounds |
| Package Dimensions | 15.12 x 11.42 x 4.57 inches |
| Voltage | 12 Volts |
| Power Source | By 12V/2A OBDII data link connector in a car |
| Operating System | win7/8/10 |
| Screen Size | 4.3 Inches |
8. Warranty and Support
For any questions or issues encountered while using the ANCEL FX6000, please contact ANCEL customer support. The manufacturer is committed to assisting users until their concerns are resolved.
Refer to your purchase documentation for specific warranty terms and conditions.
