1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your DEATTI DE-8Dc2M1TB 5-in-1 Hybrid Digital Video Recorder (DVR). This DVR supports AHD, CVI, TVI, IP, and CVBS (Analog) cameras, offering a versatile solution for your surveillance needs. Please read this manual thoroughly before using the product to ensure proper setup and functionality.
2. Safety Information
To prevent damage to the product or injury to yourself or others, observe the following safety precautions:
- Use only the power adapter supplied with the DVR.
- Ensure proper ventilation to prevent overheating. Do not block ventilation openings.
- Avoid exposing the DVR to moisture, rain, or extreme temperatures.
- Do not attempt to open or service the DVR yourself. Refer all servicing to qualified personnel.
- Handle the hard drive with care if you are installing or replacing it.
3. Package Contents
Verify that all items listed below are included in your package. If any items are missing or damaged, contact your retailer.
- DEATTI 5-in-1 Hybrid DVR
- Power Adapter
- USB Mouse
- Remote Control
- Screws for HDD Installation (if applicable)
- Quick Start Guide (physical or digital)
Figure 3.1: Package Contents. This image displays the DEATTI DVR unit, a USB mouse, an infrared remote control, a power adapter, and a set of screws typically used for hard drive installation. A small instruction manual snippet is also visible.
4. Product Overview
4.1 Front Panel
The front panel features status indicators, control buttons for menu navigation and playback, and a USB port for mouse connection or data backup.
Figure 4.1: Front Panel. This image shows the front of the DEATTI Digital Video Recorder, highlighting its control buttons, status indicators, and a front USB port. A graphic of a 1TB hard drive is superimposed, indicating pre-installed storage.
4.2 Rear Panel and Connections
The rear panel provides all necessary ports for connecting cameras, monitors, network, and power.
Figure 4.2: Rear Panel Connections. This image details the rear panel of the DEATTI DVR, showing various input/output ports including video-in (BNC for CVI, CVBS, TVI, AHD cameras), audio in/out, HDMI, VGA, Ethernet (LAN), USB, RS485, and DC 12V power input. The dimensions of the DVR (9.8 inches wide, 1.7 inches high) are also indicated.
- Video In (BNC): Connect AHD, CVI, TVI, or CVBS analog cameras.
- Audio In/Out (RCA): Connect external microphones and speakers.
- HDMI/VGA: Connect to a monitor or TV for video output.
- Ethernet (LAN): Connect to your network router for remote access.
- USB: Connect the USB mouse or external storage devices.
- DC 12V: Power input.
5. Setup
5.1 Hardware Connection
Follow these steps to connect your DVR and cameras:
- Connect your cameras to the "Video In" BNC ports on the DVR.
- Connect a monitor to the HDMI or VGA output port.
- Connect the USB mouse to a USB port on the DVR.
- For remote access, connect an Ethernet cable from the DVR's LAN port to your network router.
- Connect the power adapter to the DC 12V input and then to a power outlet. The DVR will power on automatically.
Figure 5.1: Simple Connection Diagram. This diagram illustrates the basic setup for the security system, showing a camera connected to the DVR via a video cable, and the DVR connected to a router via an internet cable. It also depicts the process of downloading a mobile app (XMEye) and viewing live footage.
5.2 Hard Drive Installation (If Not Pre-installed)
Your DE-8Dc2M1TB DVR typically comes with a pre-installed hard drive. If your model does not, or if you need to replace it, follow these general steps:
- Unplug the DVR from power.
- Remove the top cover of the DVR by unscrewing the screws on the rear and sides.
- Mount the hard drive into the designated bay using the provided screws.
- Connect the SATA data and power cables from the DVR to the hard drive.
- Replace the top cover and secure it with screws.
- Power on the DVR. You may need to format the hard drive through the DVR's menu system before recording.
5.3 Initial Configuration
Upon first boot-up, the DVR will guide you through initial settings. You may need to set the date, time, and create a password. It is crucial to set a strong password for security.
The DVR supports various camera types. You can configure the channel type to match your connected cameras (AHD, CVI, TVI, IP, CVBS).
Figure 5.3: Channel Type Configuration. This screenshot shows the DVR's interface for configuring channel types, allowing users to select between local (5M-N, 4M-N, 1080P, 1080N) and IP camera inputs (1080P, 5M). It also indicates the maximum number of playback channels and provides a visual layout for camera display.
Note: SDI cameras and certain brand cameras (e.g., ZOSI) may not be compatible with this DVR, as indicated in the configuration interface.
6. Operation
6.1 User Interface Navigation
Use the included USB mouse to navigate the DVR's graphical user interface (GUI). Right-click to access the main menu, and left-click to select options.
6.2 Live View
After setup, the DVR will display live feeds from connected cameras on the monitor. You can switch between single-camera view, quad view, or other multi-channel layouts using the on-screen controls or front panel buttons.
6.3 Recording
The DVR supports continuous recording, scheduled recording, and motion-detection recording. Configure recording settings through the main menu under "Record" or "Schedule." Ensure your hard drive is formatted and has sufficient space.
6.4 Playback
To review recorded footage, access the "Playback" option from the main menu. You can search for recordings by date, time, and event type. Use the playback controls (play, pause, fast forward, rewind) to navigate through the footage.
6.5 Remote Access
The DEATTI DVR supports remote viewing via a mobile application (e.g., XMeye) or web browser. Ensure the DVR is connected to the internet and configured for network access.
- Download the recommended mobile app (e.g., XMeye) from your device's app store (App Store for iOS, Google Play for Android).
- Register an account and log in.
- Add your DVR device by scanning the QR code displayed on the DVR's monitor (usually found in Network settings) or by manually entering its serial number/IP address.
- Once added, you can view live feeds, play back recordings, and manage settings remotely.
Figure 6.5: Remote Access. This image demonstrates remote access capabilities, showing live camera feeds displayed on a smartphone and a tablet via a dedicated mobile application. The app download buttons for App Store and Google Play are also visible.
6.6 Camera Compatibility
This DVR is a 5-in-1 hybrid system, compatible with a wide range of camera technologies:
- AHD Cameras: Analog High Definition
- CVI Cameras: High Definition Composite Video Interface
- TVI Cameras: Transport Video Interface
- IP Cameras: Internet Protocol Cameras
- CVBS (Analog) Cameras: Standard Definition Analog Cameras
Figure 6.6: 5-in-1 DVR Compatibility. This graphic illustrates the DEATTI DVR's compatibility with five different camera types: AHD, CVI, IP, TVI, and CVBS (Analog) cameras, showcasing its adaptive hybrid functionality.
7. Maintenance
7.1 Hard Drive Management
Regularly check the hard drive status through the DVR's menu. If the hard drive becomes full, the DVR will typically overwrite the oldest footage. You can configure this behavior in the recording settings. Periodically back up important footage to an external USB drive or network storage.
7.2 Firmware Updates
Check the manufacturer's website for available firmware updates. Firmware updates can improve performance, add new features, or fix bugs. Follow the provided instructions carefully when performing an update to avoid damaging the device.
7.3 Cleaning
Clean the exterior of the DVR with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation openings are free from dust and debris to maintain optimal cooling.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No video output on monitor | Loose cable connection, incorrect input selected on monitor, DVR not powered on. | Check HDMI/VGA cable connections. Ensure monitor is on correct input. Verify DVR power. |
| No camera image | Camera not powered, faulty cable, incorrect channel type setting, incompatible camera. | Check camera power and cable. Verify channel type in DVR settings. Ensure camera compatibility. |
| Cannot access DVR remotely | No internet connection, incorrect network settings, firewall blocking, app not configured. | Check network cable and router. Verify DVR network settings (IP, DNS). Ensure port forwarding (if needed) or P2P is active. Reconfigure app. |
| No recording | Hard drive not installed/formatted, recording schedule not set, motion detection not configured. | Check HDD status and format if necessary. Configure recording schedule or motion detection settings. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | DE-8Dc2M1TB |
| Video Input | 8 Channels (AHD, CVI, TVI, IP, CVBS) |
| Video Output | HDMI, VGA |
| Audio Input/Output | RCA (specific number of channels not detailed, typically 1-4 in, 1 out) |
| Recording Resolution | Up to 1080p Lite (or higher depending on channel type configuration) |
| Storage Capacity | 1TB Pre-installed |
| Connectivity | Wired (Ethernet) |
| USB Interface | Yes (for mouse, backup) |
| Remote Access | Mobile App (e.g., XMeye), Web Browser |
| Power Supply | DC 12V |
10. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official DEATTI website. Keep your purchase receipt as proof of purchase for warranty claims.
