Introduction
Thank you for purchasing the Xbeauty 50-inch Electric Fireplace. This appliance is designed to provide both aesthetic ambiance with realistic flame effects and supplemental heating for your living space. Please read this manual thoroughly before installation and operation to ensure safe and efficient use of your fireplace.
Key features of your Xbeauty Electric Fireplace include:
- Multiple installation options: Recessed or Wall Mounted.
- Realistic flame effects with 12 color options, 5 flame speeds, and 5 brightness levels.
- 12 ember bed color lighting options.
- Dual heating modes: 750W and 1500W, providing up to 5100 BTUs for heating areas up to 400 sq. ft.
- Convenient control via touch screen and remote control.
- Integrated 1-8 hour timer control.
- Overheat protection for safety.
Figure 1: Front view of the Xbeauty 50-inch Electric Fireplace displaying multicolor flames.
Safety Information
Please observe the following safety precautions to reduce the risk of fire, electric shock, or injury:
- Read all instructions before using this fireplace.
- Do not operate any fireplace with a damaged cord or plug, or if the heater has malfunctioned or been dropped/damaged.
- Do not use outdoors.
- Avoid placing the power cord under carpeting or covering it with throw rugs, runners, or similar coverings.
- Always unplug the fireplace when not in use.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the fireplace.
- Ensure the fireplace is connected to a properly grounded 120V outlet.
Setup and Installation
Your Xbeauty electric fireplace offers versatile installation options: it can be recessed into a wall or mounted directly on a wall surface. It is designed to fit a 2' x 6' stud wall for recessed installation.
Product Dimensions:
- Width: 50 inches (127 cm)
- Height: 18.11 inches (46 cm)
- Depth: 3.86 inches (9.8 cm)
Figure 2: Product dimensions and illustration of wall-mounted and recessed installation methods.
Figure 3: Visual representation of the two primary installation methods: recessed and wall-mount.
Installation Steps (General Guidelines):
- Unpacking: Carefully remove the fireplace and all components from the packaging. Retain packaging for future transport or storage.
- Location Selection: Choose a suitable location away from water, direct sunlight, and high traffic areas. Ensure the chosen wall can support the weight of the fireplace. Maintain at least 8 inches of clearance if installing under a TV.
- Power Connection: Ensure a standard 120V, 12.5 AMP grounded outlet is available within reach of the power cord.
- Wall Mounting:
- Mark the desired mounting height.
- Secure the mounting bracket to the wall studs using appropriate hardware.
- Carefully lift the fireplace and hang it onto the mounting bracket.
- Recessed Installation:
- Construct or modify a wall opening to match the fireplace dimensions (50" W x 18.11" H x 3.86" D).
- Slide the fireplace into the opening and secure it using the provided screws.
- Media Bed Installation: Install the decorative crystal media into the designated tray at the bottom of the fireplace.
- Final Check: Ensure all connections are secure and the fireplace is stable before plugging it in.
Operating Instructions
Your Xbeauty electric fireplace can be operated using the touch screen controls located on the unit or the included remote control.
Control Panel and Remote Functions:
Figure 4: Overview of the fireplace touch screen display and remote control functions.
Figure 5: The fireplace can be controlled using either the remote or the integrated touch screen.
- Power ON/OFF: Press the power button to turn the unit on or off.
- Heater: Activate the heating function. Toggle between 750W and 1500W heat settings. The heater operates quietly (≤40dB).
- Flame Color (Color A): Cycle through 12 different flame color options.
- Ember Bed Color (Color B): Cycle through 12 different ember bed color options.
- Flame Speed: Adjust the speed of the flame effect through 5 levels (V1-V5).
- Flame Brightness (Dimmer): Adjust the brightness of the flame effect through 5 levels (L1-L5).
- Timer: Set the automatic shut-off timer for 1 to 8 hours.
Flame and Ember Bed Customization:
The fireplace offers extensive customization for its visual effects:
Figure 6: A selection of 12 flame and crystal stone color combinations.
Figure 7: The 12 available flame colors for personalized ambiance.
Figure 8: The 12 available ember bed colors to complement the flame effects.
Figure 9: Five adjustable brightness levels for the flame effect.
Figure 10: Five adjustable speed settings for the flame effect.
Figure 11: The fireplace offers two heat settings: 750W for lower heat and 1500W for higher heat output.
Figure 12: The timer function allows setting the fireplace to operate for 1 to 8 hours.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your electric fireplace.
- Cleaning:
- Always unplug the fireplace before cleaning.
- Use a soft, damp cloth to clean the exterior surfaces. Do not use abrasive cleaners or sprays.
- Gently wipe the glass panel with a soft cloth. Glass cleaner can be used sparingly if needed.
- Air Vents: Periodically check and clean the air inlets and outlets to ensure they are free from dust and debris. Blocked vents can affect heating efficiency and safety.
- Storage: If storing the fireplace for an extended period, unplug it and store it in a dry, dust-free location.
Figure 13: Location of air inlets and outlets, important for proper ventilation and heating.
Troubleshooting
If you encounter issues with your fireplace, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fireplace does not turn on. | No power, tripped circuit breaker, loose connection. | Check power cord connection, ensure outlet is functional, reset circuit breaker. |
| No heat output. | Heater function not activated, low heat setting, blocked air vents, overheat protection activated. | Activate heater function, select 1500W setting, clear air vents, unplug and allow to cool for 15 minutes. |
| Flames are not visible or flickering. | Flame effect not activated, brightness set too low, LED malfunction. | Activate flame effect, increase brightness, contact customer support if LEDs are faulty. |
| Remote control not working. | Dead batteries, obstruction, remote out of range. | Replace batteries, remove obstructions, ensure remote is within operating range. |
If the problem persists after attempting these solutions, please contact Xbeauty customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Xbeauty |
| Model Name | RFH-5001LC |
| Product Dimensions (D x W x H) | 3.86" x 50" x 18.11" |
| Material | Glass |
| Installation Type | Wall Mount, Recessed |
| Power Source | AC |
| Voltage | 120V |
| Amperage | 12.5 Amps |
| Power Consumption | 750W / 1500W |
| Heat Output | 5100 British Thermal Units |
| Heating Coverage | Up to 400 sq. ft. |
| Special Features | Timer, Flame Brightness Control, Flame Color Changing, Flame Speed Changing, Heater |
| Item Weight | 38.6 Pounds |
| UPC | 761895928922 |
Warranty
The Xbeauty 50-inch Electric Fireplace comes with a Limited Warranty. Please refer to the warranty card included with your product for specific terms, conditions, and duration of coverage. Keep your proof of purchase for warranty claims.
Customer Support
For any questions, technical assistance, or warranty claims, please contact Xbeauty customer support. Refer to the contact information provided in your product packaging or visit the official Xbeauty website.
You can also visit the Xbeauty Store on Amazon for more information and support resources.
