1. Introduction
Thank you for choosing the BN-LINK Mini Wireless Remote Control Outlet Switch. This product is designed to provide convenient wireless control over your household appliances, lights, and other electronic devices. With its simple plug-and-play design and strong RF signal, you can easily manage your devices from a distance.
Image: The BN-LINK Mini Wireless Remote Control Outlet Switch kit, showing five compact plug-in outlets and two remote controls, all in white.
2. Important Safety Information
- For indoor use only. Do not expose to water or moisture.
- Do not exceed the maximum load rating of 125V, 10A, 1250W. Overloading may cause damage to the unit and potential fire hazards.
- Ensure the device is fully inserted into the wall outlet.
- Do not disassemble or attempt to repair the unit. Contact customer support for assistance.
- Keep out of reach of children.
- Unplug the device from the wall outlet before cleaning.
- Not compatible with shop vacuums.
3. Package Contents
The BN-LINK Mini Wireless Remote Control Outlet Switch kit includes:
- 5 x Wireless Remote Control Outlets
- 2 x Wireless Remote Controls
- Batteries for remotes (2 x 12V/23A, included)
4. Product Features
- Ready-to-Go: Pre-programmed for immediate use.
- Strong RF Signal: Operates through doors and walls up to 100 ft line of sight.
- Flexibility: Expandable system allows pairing multiple remotes to one outlet or one remote to multiple outlets.
- Simple Convenience: Control appliances with the remote or manual on/off switch on the outlet.
- Safe and Reliable: Outlets remain off after a power outage to conserve energy and protect appliances.
- Space Saving Design: Compact design occupies only one wall outlet.
5. Setup Instructions
The BN-LINK Wireless Remote Control Outlets are pre-programmed for immediate use. Follow these steps to set up your system:
- Install Remote Batteries: Open the battery compartment on the back of each remote control and insert the included 12V/23A battery, ensuring correct polarity.
- Plug in Outlets: Plug the wireless remote control outlets into standard 125V wall receptacles.
- Connect Appliances: Plug your desired appliances or lights into the remote control outlets.
- Test Functionality: Use the corresponding buttons on the remote control (e.g., '1 ON' for outlet 1) to turn the connected appliance on and off.
Image: A hand holding a remote control, pointing towards a BN-LINK outlet plugged into a wall behind a chair, demonstrating the 'Plug In and Use' feature.
6. Operating Instructions
Using the Remote Control
Each remote control has numbered 'ON' and 'OFF' buttons corresponding to the numbered outlets. Press the 'ON' button to turn on the connected appliance and the 'OFF' button to turn it off.
Image: A hand holding a BN-LINK remote control, activating a string of decorative lights plugged into a remote outlet near the floor.
Manual On/Off Switch
Each remote control outlet also features a manual on/off button located on its side. Press this button to manually toggle the power to the connected appliance.
7. Pairing and Programming Instructions
The outlets and remotes are pre-programmed. If you need to re-program or pair additional units, follow these steps:
- Clear Existing Pairing (Optional): To clear an outlet's existing pairing, press and hold the 'Learning Function Button' (manual on/off switch) on the side of the outlet for approximately 5 seconds until the indicator light flashes rapidly. Release the button. The pairing is now cleared.
- Enter Pairing Mode: Press the 'Learning Function Button' on the side of the outlet once. The indicator light will begin to flash slowly, indicating it is in pairing mode.
- Pair with Remote: Within 5 seconds of the indicator light flashing, press the desired 'ON' or 'OFF' button (e.g., '1 ON' or '1 OFF') on the remote control. The indicator light on the outlet will stop flashing and turn solid, confirming successful pairing.
- Test Pairing: Use the remote control to turn the outlet on and off to confirm the new pairing.
Flexible Pairing Options
Image: A diagram illustrating two flexible pairing configurations: 'One Switch Control Multiple Outlets' where a single remote button controls several outlets, and 'Multiple Switches Control One Outlet' where multiple remote buttons can control a single outlet.
- One Remote Button, Multiple Outlets: You can program a single 'ON'/'OFF' button on your remote to control multiple outlets simultaneously. Repeat the pairing steps for each outlet using the same remote button.
- Multiple Remote Buttons, One Outlet: You can program a single outlet to respond to multiple 'ON'/'OFF' buttons from different remotes or even different buttons on the same remote. Repeat the pairing steps for the same outlet using different remote buttons.
Image: A single BN-LINK remote control outlet shown above five remote controls, illustrating that one outlet can be controlled by multiple remotes.
8. Maintenance
To maintain your BN-LINK Wireless Remote Control Outlets:
- Cleaning: Unplug the outlet from the wall before cleaning. Wipe the surface with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Battery Replacement: Replace the remote control batteries (12V/23A) when the remote's range decreases or the indicator light on the remote dims.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Outlet does not respond to remote. | Low remote battery; Outlet not plugged in; Outlet not paired; Remote out of range. | Replace remote battery; Ensure outlet is securely plugged in; Re-pair the outlet and remote (see Section 7); Move closer to the outlet. |
| Remote range is reduced. | Low remote battery; Obstructions (walls, metal objects); Interference from other electronics. | Replace remote battery; Reduce obstructions between remote and outlet; Move the outlet or remote away from interfering devices. |
| Appliance does not turn on when outlet is activated. | Appliance is off or unplugged; Appliance is faulty; Outlet is faulty. | Ensure appliance is switched on and plugged into the outlet; Test appliance in a different outlet; Test the remote outlet with a different appliance. |
10. Specifications
- Model Number: U116R-2-5
- Voltage: 125V~, 60Hz
- Current Rating: 10A
- Max Load: 1250W
- Remote Frequency: RF (Radio Frequency)
- Remote Range: Up to 100 ft (line of sight)
- Remote Battery: 12V/23A (included)
- Operation Mode: ON-OFF
- Contact Type: Normally Closed
- Connector Type: Plug In
- Item Dimensions (L x W x H): 2 x 2 x 3.5 inches (outlet)
- Certifications: ETL Listed
Image: An illustration detailing the 125V/60Hz/10A/1250W rating, suitable for various electrical devices like fans, lamps, coffee makers, routers, and aquariums, alongside the remote and outlet.
11. Warranty and Customer Support
BN-LINK products are designed for reliability and performance. For warranty information or technical support, please contact BN-LINK customer service directly. You can typically find contact details on the product packaging or the official BN-LINK website.
For more information, visit the BN-LINK Store on Amazon.
