CC KITS Full-Size Conversion Kit Bed Rails for Brayden Convertible Crib #0050

1. Introduction

This manual provides comprehensive instructions for assembling and using your CC KITS Full-Size Conversion Kit Bed Rails, model #0050. This kit is designed to convert your Brayden Convertible Crib by Delta Children into a full-size bed, offering a safe and comfortable sleeping solution as your child grows. The kit features durable solid wood construction and non-toxic finishes, ensuring a secure environment.

Please read all instructions carefully before beginning assembly. Keep this manual for future reference.

Image 1: Brayden Convertible Crib converted to a full-size bed using the conversion kit.

2. Parts List

Ensure all components are present before starting assembly. If any parts are missing or damaged, please contact customer support.

• 2 Wooden Bed Rails with Brackets on the Ends
• 4 Slats
• 8 Washers
• 8 Screws
• 8 Allen Bolts
• 1 Allen Key/Wrench
• 1 Screwdriver (optional; not included)

Image 2: The two wooden bed rails, key components of the conversion kit.

Image 3: The four wooden slats for mattress support.

3. Setup and Installation

The following steps detail the process of converting your Brayden Convertible Crib into a full-size bed. For a visual guide, please refer to the embedded video below.

1. Step 1: Disassemble the Crib. Completely disassemble your Brayden Convertible Crib according to its original instruction sheet. Keep all bolts and the mattress support for future use. If your crib's footboard has removable legs, detach them from the side rails and attach them to the footboard as shown in the video (0:37).
2. Step 2: Attach Bed Rails to Headboard. Position the headboard of your crib. Attach one end of each wooden bed rail to the headboard using two Allen bolts and washers per rail. Ensure the connections are secure (0:56).
3. Step 3: Attach Bed Rails to Footboard. Position the footboard of your crib. Attach the other end of the bed rails to the footboard in the same manner as the headboard, using two Allen bolts and washers per rail. Verify all connections are tight (1:05).
4. Step 4: Attach Support Slats. Place the four support slats evenly across the bed rails. It is recommended to place one slat near the headboard, one near the footboard, and space the others evenly in between. Secure each slat to the bed rails using the provided screws and a screwdriver (1:12).

Important Note on Mattress Support: The conversion kit requires mattress support. The included slats provide basic support. For optimal support and to forgo a box spring, an additional set of slats (sold separately) may be purchased to keep the mattress lower and provide full coverage (1:36). Alternatively, a box spring can be used, but this will result in a higher mattress profile (1:30).

Image 4: Visual comparison of mattress height using slats versus a box spring.

Optional Safety Rail: For toddlers transitioning to a full-size bed, a safety bed rail guard (sold separately) can be attached to prevent falls while allowing easy access in and out of bed (1:41). Consider purchasing two for double protection.

Image 5: Optional safety rail for added protection.

4. Operation

Once assembled, your Brayden Convertible Crib is now a full-size bed. Place a standard full-size mattress (sold separately) onto the support slats. Ensure the mattress fits snugly within the bed frame. The bed is designed to support up to 600 pounds when used with adequate mattress support.

Image 6: A full-size mattress, required for the converted bed.

5. Maintenance

To maintain the longevity and safety of your converted bed, follow these guidelines:

• Regularly check all bolts and screws to ensure they remain tight. Loose hardware can compromise the bed's stability.
• Clean the wooden surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
• Inspect the slats periodically for any signs of wear or damage. Replace any damaged slats immediately to ensure proper mattress support.

6. Troubleshooting

Compatibility Issues: This conversion kit is specifically designed for the Brayden Convertible Crib by Delta Children. However, due to different models and production runs, it is possible that the brackets may not fit your crib perfectly. If this occurs, please contact us for alternate brackets at no extra charge (1:59 in video).

For any other issues or concerns, please refer to the Warranty and Support section for contact information.

7. Specifications

Safety Features: Our crib conversion kit features water-based, non-toxic finishes, free from lead and phthalates, ensuring a safe sleep environment for your child.

Image 7: Non-toxic materials used in the conversion kit.

8. Warranty and Support

This CC KITS Full-Size Conversion Kit Bed Rails comes with a Lifetime Warranty, ensuring long-lasting durability and peace of mind. This warranty covers manufacturing defects and material flaws under normal use.

For warranty claims, missing parts, technical assistance, or any other inquiries, please contact the manufacturer, Grow-with-Me Crib Conversion Kits, directly. Contact information can typically be found on the product packaging or their official website.