1. Introduction
The Kraus Oletto KPF-2620SFS Pull-Down Kitchen Faucet is designed to bring clean, modern style and exceptional functionality to your kitchen. Featuring an optimized 15-1/8 inch height, it fits comfortably under most kitchen cabinets. This faucet incorporates QuickDock mounting technology for simplified installation and a dual-function pull-down sprayer with Reach Technology for enhanced maneuverability. Its Spot-Free Stainless Steel finish resists water spots and fingerprints, ensuring a pristine appearance with minimal effort.

Image: The Kraus Oletto KPF-2620SFS Pull-Down Kitchen Faucet in Spot-Free Stainless Steel, showcasing its high-arc design and integrated handle.
2. Setup and Installation
The Kraus Oletto faucet is engineered for straightforward installation, featuring QuickDock mounting technology that allows for installation from above the countertop. This simplifies the process, making it an accessible DIY project.
2.1 Components Included
- Faucet assembly
- Deck Plate (for 3-hole installations)
- Mounting Hardware
- Pre-attached Nylon Water Lines
- QuickConnect Sprayer Hose
- QuickWeight Counterweight
2.2 Installation Steps
- Install Base from Above the Sink: Position the faucet base on the countertop. The QuickDock system allows for secure fastening without needing to access from underneath the sink.

Image: Illustration of installing the faucet base from above the sink, highlighting the QuickDock technology.
- Secure Base with Allen Key: Use the provided Allen key to tighten the mounting hardware, securing the faucet firmly to the countertop.

Image: A hand using an Allen key to secure the faucet base to the countertop.
- Install Faucet and Water Lines: Connect the pre-attached nylon water lines to your hot and cold water supply. Ensure all connections are tight to prevent leaks.

Image: The faucet body being placed onto the secured base, with water lines visible for connection.
- Secure Faucet: Attach the QuickWeight counterweight to the sprayer hose to ensure smooth retraction. Test the faucet for proper operation and check for any leaks.

Image: The fully installed Kraus Oletto faucet with the deck plate, ready for use.
2.3 Installation Video
Video: An official Kraus video demonstrating the installation and features of the Kraus Kitchen Faucet, providing a visual guide to the setup process.
3. Operating Instructions
The Oletto faucet is designed for intuitive and efficient use, making daily kitchen tasks simpler.
3.1 Single Handle Operation
Control water temperature and volume with the single lever handle. The handle features a 90° forward rotation, allowing for installation in tighter spaces without backsplash clearance.

Image: Diagram illustrating the 90° forward rotation of the single handle for easy operation in confined spaces.
3.2 Dual Function Pull-Down Sprayer
The pull-down sprayer offers two distinct spray modes: an aerated stream for filling pots and pitchers, and a powerful spray to tackle stubborn food residue. Switch between modes using the button on the sprayhead.

Image: Close-up view of the dual-function sprayhead, demonstrating the aerated stream and powerful spray options.
3.3 Reach Technology and High-Arc Spout
The sprayer is equipped with Reach Technology, featuring an easy-retract hose and swivel adapter for maximum maneuverability and an extended range of motion. The high-arc spout swivels 360 degrees, providing ample space for oversized items and a broad range of motion for all your kitchen tasks.

Image: A hand demonstrating the pull-down sprayer in use, highlighting its extended reach and flexibility.

Image: Visual representation of the Reach Technology, showing the sprayer's ability to extend and swivel for full sink coverage.
4. Maintenance
Proper care and maintenance will ensure the longevity and performance of your Kraus Oletto faucet.
4.1 Spot-Free Finish Care
The Spot-Free Stainless Steel finish is designed to resist water spots and fingerprints. To maintain its appearance, simply wipe with a soft, damp cloth. Avoid abrasive cleaners or chemicals that could damage the finish.

Image: A visual comparison demonstrating the effectiveness of the Spot-Free finish against a standard stainless steel surface.
4.2 Easy-Clean Nozzles
The sprayer features soft rubber nozzles that allow you to easily wipe away mineral build-up. This helps prevent clogging and ensures consistent spray performance over time. No special tools are required for cleaning the nozzles.
5. Troubleshooting
If you encounter any issues with your Kraus Oletto faucet, please refer to the following common troubleshooting tips:
- Low Water Flow: Check if the water supply valves are fully open. Inspect the aerator for mineral build-up and clean if necessary. Ensure water lines are not kinked.
- Leaking: Verify all connections are tight. If leaks persist, check O-rings and gaskets for damage and replace if needed.
- Sprayer Not Retracting: Ensure the QuickWeight counterweight is properly positioned on the sprayer hose under the sink and is not obstructed.
- Difficulty Switching Spray Modes: Clean the sprayer nozzles to remove any mineral deposits that might be impeding the mechanism.
For persistent issues, contact Kraus customer support.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Kraus |
| Model Name | Oletto |
| Part Number | KPF-2620SFS |
| Color | Spot-Free Stainless Steel |
| Finish Type | Stainless Steel |
| Material | Brass |
| Style | Pull Down Faucet |
| Mounting Type | Deck Mount |
| Number of Handles | 1 |
| Hole Count | 1 |
| Maximum Flow Rate | 1.8 Gallons Per Minute |
| Spout Height | 7.63 Inches |
| Spout Reach | 8.88 Inches |
| Hose Length | 14 Inches |
| Special Feature | Lead Free |
| Item Weight | 4.91 Pounds |
| Product Dimensions | 10.5 x 4.38 x 15.13 inches |

Image: A display of various finishes available for Kraus Oletto faucets, including Spot-Free Stainless Steel.
7. Warranty and Support
The Kraus Oletto KPF-2620SFS faucet comes with a Limited Lifetime Warranty. This warranty covers defects in material and manufacturing for the lifetime of the product, under normal use and maintenance. For specific terms and conditions, or to file a warranty claim, please refer to the official Kraus website or contact their customer support.
7.1 Customer Support
For further assistance, technical support, or warranty inquiries, please visit the official Kraus website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.