Bunn GRB Velocity Brew

BUNN GRB Velocity Brew 10-Cup Home Coffee Brewer Instruction Manual

Model: GRB Velocity Brew (38300.0063)

Introduction

The BUNN GRB Velocity Brew 10-Cup Home Coffee Brewer is designed for quick and simple coffee preparation. Featuring a commercial-grade stainless steel hot water tank, this brewer keeps 70 ounces of water consistently hot, allowing for immediate brewing. A full 10-cup carafe can be brewed in approximately three minutes.

BUNN GRB Velocity Brew 10-Cup Home Coffee Brewer, Black

Figure 1: Front view of the BUNN GRB Velocity Brew 10-Cup Home Coffee Brewer.

Setup

Before first use, follow these steps to prepare your coffee brewer:

  1. Placement: Position the coffee brewer on a flat, stable surface near an electrical outlet. Ensure adequate clearance around the unit for ventilation.
  2. Initial Fill: Pour fresh, cold water into the top reservoir. This fills the internal hot water tank.
  3. Heating: Plug in the brewer and turn on the main power switch (usually located on the side or front). Allow approximately 15 minutes for the water in the internal tank to heat to optimal brewing temperature. The brewer is designed to keep this water hot continuously.
  4. First Use Rinse: After the water has heated, brew a full carafe of plain water (without coffee grounds) to rinse the system. Discard this water. Repeat if necessary until any new appliance smell dissipates.

Operating Instructions

The BUNN GRB Velocity Brew is designed for rapid brewing once the initial setup is complete and the internal tank is hot.

  1. Prepare Filter Basket: Place a large flat-bottom coffee filter into the brew funnel.
  2. Add Coffee Grounds: Add your desired amount of coffee grounds to the filter. The multi-stream sprayhead is designed to evenly shower hot water over the grounds for optimal flavor extraction.
  3. Position Carafe: Ensure the empty carafe is placed correctly on the warmer plate beneath the brew funnel.
  4. Add Water: Pour fresh, cold water into the top reservoir. The amount of cold water added will displace an equal amount of hot water from the internal tank, initiating the brewing process.
  5. Close Lid: Close the top lid of the brewer. Brewing will begin almost immediately.
  6. Warmer Plate: The switch-activated warmer plate will keep your brewed coffee at an optimal serving temperature.
Coffee grounds in a filter basket

Figure 2: Coffee grounds placed in the filter basket, ready for brewing.

Coffee dripping into a carafe

Figure 3: Hot coffee being dispensed into the glass carafe during the brewing cycle.

Pouring coffee into a travel mug

Figure 4: The drip-free carafe allows for clean pouring directly into a travel mug or cup.

Brewing Capacity

Maintenance

Regular cleaning and maintenance ensure optimal performance and longevity of your BUNN coffee brewer.

Troubleshooting

If you encounter issues with your coffee brewer, consider the following common solutions:

Specifications

BrandBunn
Model NameBUNN GRB Velocity Brew 10-Cup Home Coffee Brewer, Black
Model Number38300.0063
ColorBlack
Product Dimensions7.1"D x 13.8"W x 14.3"H
Item Weight8 pounds
Capacity10 Cups (50 ounces / 1.8 Liters)
Voltage110 Volts
Special FeaturesAnti-Drip Carafe, Multi-Flow Head Sprayer
Included ComponentsBUNN GRB Velocity Brew 10-Cup Home Coffee Brewer, Black
Care InstructionsHand wash (for some components), Dishwasher safe (carafe)
OriginDesigned and Assembled in the USA

Warranty & Support

The BUNN GRB Velocity Brew 10-Cup Home Coffee Brewer comes with a 3-Year Limited Warranty on all Speed Brew models.

For customer service and support, contact the BUNN Customer Service Team located in Springfield, IL, USA.