Triomph TRSC18

Download PDF
Contents

Triomph Digital Body Weight Bathroom Scale (Model TRSC18) Instruction Manual

Your guide to setting up, operating, and maintaining your Triomph Digital Body Weight Bathroom Scale.

1. Introduction

Thank you for choosing the Triomph Digital Body Weight Bathroom Scale. This scale is designed for accurate body weight measurement with a sleek, ultra-slim design and tempered glass platform. Please read this manual carefully to ensure proper use and to maximize the lifespan of your device.

Triomph Digital Body Weight Bathroom Scale, top view showing dimensions and 400lb capacity

Image 1: Triomph Digital Body Weight Bathroom Scale, illustrating its compact dimensions (11.8" x 10.2" x 0.7") and 400lb capacity.

2. Setup

2.1 Unpacking and Battery Installation

Your Triomph Digital Body Weight Bathroom Scale comes with 2 x 1.5V AAA batteries included. Locate the battery compartment on the underside of the scale. Open the cover, insert the batteries according to the polarity indicators (+/-), and close the cover securely.

Underside of Triomph scale showing battery compartment and unit switching key

Image 2: Underside view of the scale, highlighting the battery compartment and the hidden unit switching key.

2.2 Placement

For optimal accuracy, place the scale on a hard, flat, and stable surface. Avoid placing the scale on carpets, rugs, or any soft surfaces, as this can affect measurement precision.

2.3 Initial Calibration

After installing batteries or moving the scale, allow it a moment to calibrate itself before the first measurement. Simply step on the scale briefly, then step off. The display will show '0.0' or a similar indication, signifying it is ready for use.

2.4 Unit Selection

The scale supports three measurement units: kilograms (kg), pounds (lb), and stone-pounds (st:lb). To change the unit, locate the unit switching key on the underside of the scale (refer to Image 2). Press this button to cycle through the available units until your desired unit is displayed.

3. Operating Instructions

3.1 Taking a Measurement

  1. Ensure the scale is placed on a hard, flat surface.
  2. Gently step onto the center of the scale with bare feet. The scale features 'Step-On Technology' and will automatically turn on.
  3. Stand still on the platform. Your weight will be displayed on the LCD screen within seconds.
  4. The scale will automatically turn off after a few seconds of inactivity to conserve battery life.
Triomph Digital Body Weight Bathroom Scale showing LCD display, auto-on, low battery, and overload indicators

Image 3: Scale display features including LCD, auto-on, low battery indicator, and overload error ('ERR').

3.2 Reading the Display

The scale features a large, backlit LCD display, making it easy to read your weight even in dimly lit environments. The displayed weight will remain visible for a few seconds after you step off the scale.

Close-up of the Triomph scale's large font backlit LCD display showing a weight reading

Image 4: Close-up view of the large font backlit LCD display, ensuring clear readability.

4. Maintenance

4.1 Cleaning

The tempered glass surface of the scale is easy to clean. Use a soft, damp cloth and a mild cleaning agent if necessary. Avoid abrasive cleaners or harsh chemicals that could damage the surface.

4.2 Battery Replacement

When the battery indicator (refer to Image 3) appears on the display, it is time to replace the batteries. Replace both AAA batteries simultaneously to ensure consistent performance.

5. Troubleshooting

  • Inaccurate Readings: Ensure the scale is on a hard, flat surface. Soft surfaces like carpets can cause inaccurate measurements. If the scale has been moved, allow it to calibrate by stepping on and off once before taking a measurement.
  • 'Lo' or Low Battery Indicator: This indicates that the batteries are low and need to be replaced. Replace both AAA batteries.
  • 'ERR' or Overload Indicator: This means the maximum weight capacity of 400 lbs (180 kg) has been exceeded. Step off the scale immediately to prevent damage.
  • No Display: Check if the batteries are correctly installed and not depleted. If the issue persists, try replacing the batteries.

Safety Information

The scale is constructed with high-quality impact-resistant tempered glass. While designed for durability, handle the scale with care. Avoid dropping it or subjecting it to severe impacts, which could compromise its integrity.

Triomph scale showing safety edge design and 6mm high quality tempered glass

Image 5: Illustration of the scale's safety edge design and 6mm high-quality tempered glass construction.

6. Specifications

FeatureSpecification
Model NumberTRSC18WHITE
BrandTriomph
ColourWhite
Weight Capacity Maximum181.44 kg (400 lbs)
Readout Accuracy91 g (0.2 lb)
Measurement Typekg / lb / st
Display TypeLCD (Backlit)
MaterialTempered Glass
Item Weight1.36 kg
Power Source2 x 1.5V AAA Batteries
Product Dimensions11.8 x 10.2 x 0.7 inches (300x260x18mm)
Diagram illustrating the high precision components of the Triomph scale: high sensitivity sensors, super bright LCD bulbs, and 24 military lever ECU

Image 6: Internal components ensuring high precision, including four high-sensitivity sensors.

7. Warranty and Support

Triomph offers a 1-Year Warranty on this product, along with a 30-day money-back guarantee and Lifetime Support. For any questions, concerns, or warranty claims, please contact Triomph customer service through the retailer's platform or the official Triomph website.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.