Introduction
Thank you for choosing the Teka Classic 1C 1E 50 cm Sink. This high-quality 18/10 stainless steel sink features a single bucket and drainer, designed for built-in and reversible installation. Its soundproofing properties reduce noise and vibration, ensuring a comfortable user experience. The 190 mm deep bucket accommodates large kitchen items, making it ideal for various culinary tasks. This manual provides essential information for the proper installation, operation, and maintenance of your new sink.
Image Description: A top-down view of the Teka Classic 1C 1E sink, illustrating its built-in design and soundproofing capabilities. Text on the image indicates 'Fregadero encastrado' (Built-in sink) and 'Insonorización' (Soundproofing).
Image Description: A top-down view of the Teka Classic 1C 1E sink, emphasizing its depth and stainless steel construction. Text on the image indicates 'Profundidad' (Depth) and 'Acero inoxidable' (Stainless Steel).
Safety Information
- Always ensure the water supply is turned off before beginning any installation or maintenance.
- Wear appropriate personal protective equipment (PPE) such as gloves and eye protection during installation.
- Handle the sink with care to avoid scratches or damage to the stainless steel finish.
- Ensure all connections are watertight to prevent leaks.
- If you are unsure about any step, consult a qualified professional.
Package Contents
Verify that all components are present before starting installation.
- Teka Classic 1C 1E 50 cm Sink
- Valve basket 3 ½"
- Installation clips/staples
- Soundproofing material (pre-applied)
Setup and Installation
The Teka Classic 1C 1E sink is designed for built-in (recessed) installation and is reversible, allowing for flexible placement of the drainer.
1. Prepare the Countertop
Ensure your countertop has a cutout that matches the sink's dimensions. The sink is designed for a 50 cm furniture base. Refer to the dimension diagram for precise measurements.
Image Description: A technical drawing showing the top-down dimensions of the Teka Classic 1C 1E sink. Key measurements include overall length (860mm), width (500mm), bowl dimensions (406mm x 406mm), and drainer dimensions. It also indicates a 35mm diameter hole for the faucet.
2. Position the Sink
Place the sink into the prepared cutout. The sink is reversible, allowing you to choose whether the drainer is on the left or right side.
Image Description: An angled view of the Teka Classic 1C 1E stainless steel sink, showing the single bowl and integrated drainer. The sink is shown installed flush with a light-colored countertop, highlighting its built-in design.
3. Secure the Sink
Use the provided installation clips or staples to secure the sink firmly to the underside of the countertop. Ensure an even seal around the perimeter to prevent water ingress.
4. Install Faucet and Drain Assembly
- Install your chosen faucet into the pre-drilled tap hole (35mm diameter).
- Assemble the 3 ½" valve basket and connect it to your plumbing system. Ensure all connections are tight and sealed to prevent leaks.
Image Description: A top-down view of the Teka Classic 1C 1E sink with a modern chrome faucet installed in the designated tap hole. The image shows the sink's clean lines and the integration of the faucet.
Operating Instructions
The Teka Classic 1C 1E sink is designed for everyday kitchen use.
- Water Flow: Use the installed faucet to control water flow and temperature.
- Drainage: The 3 ½" valve basket effectively collects debris and allows for efficient water drainage. Ensure it is clear of large food particles to prevent blockages.
- Soundproofing: The integrated soundproofing material reduces noise during use, providing a quieter kitchen environment.
Maintenance and Care
Proper care will ensure the longevity and appearance of your stainless steel sink.
- Daily Cleaning: Wipe the sink with a dry cloth after each use to prevent water spots and mineral buildup.
- Regular Cleaning: For a deeper clean, use a mild soap or a specialized stainless steel cleaner with a soft cloth or sponge. Always rub in the direction of the grain.
- Avoid Abrasives: Do not use abrasive cleaners, steel wool, or harsh chemicals (e.g., bleach, strong acids) as these can scratch or damage the stainless steel finish.
- Prevent Stains: Avoid leaving acidic foods (e.g., citrus, tomatoes) or corrosive substances in the sink for extended periods. Rinse thoroughly after contact.
- Drain Maintenance: Periodically remove and clean the valve basket to prevent clogs and odors.
Troubleshooting
This section addresses common issues you might encounter with your sink.
- Slow Drainage:
Cause: Blockage in the drain or valve basket.Solution: Remove the valve basket and clean any accumulated food particles or debris. If the issue persists, a plumbing snake or drain cleaner may be required for the P-trap.
- Water Spots/Stains:
Cause: Hard water deposits or improper drying.Solution: Wipe the sink dry after each use. For existing spots, use a mixture of vinegar and water, or a specialized stainless steel cleaner, and buff with a soft cloth.
- Scratches on Surface:
Cause: Abrasive materials or harsh scrubbing.Solution: Stainless steel can scratch. Minor scratches can sometimes be blended with a fine abrasive pad (like Scotch-Brite) rubbed in the direction of the grain, but this should be done with caution. Prevent future scratches by avoiding abrasive cleaners and sharp objects.
- Leaks Around Sink Edge:
Cause: Improper sealing during installation or loose clips.Solution: Check the installation clips and tighten if necessary. Reapply silicone sealant around the sink's perimeter if the seal is compromised.
Specifications
| Feature | Detail |
|---|---|
| Brand | Teka |
| Model Number | TEK-10119013 |
| Material | 18/10 Stainless Steel |
| Color | Silver |
| Installation Type | Built-in (Recessed) |
| Sink Type | Single Bowl with Drainer, Reversible |
| Overall Dimensions (W x D x H) | 86 cm x 50 cm x 19 cm (approx. 33.86"W x 19.69"D x 7.48"H) |
| Bowl Depth | 190 mm (7.48 inches) |
| Drain Type | Grid (3 ½" Valve Basket) |
| Tap Hole Count | 1 (Ø35mm) |
| Minimum Base Cabinet Width | 50 cm |
| Item Weight | 4.06 kg (8.93 pounds) |
| Soundproofing | Yes |
Warranty and Support
Teka products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Teka website.
If you require technical assistance, have questions about installation, or need to report a defect, please contact Teka customer support through their official channels.
- Teka Official Website: www.teka.com
- Customer Service: Refer to your regional Teka website for local contact information.
