Introduction
This manual provides essential information for the safe and effective use of your PWR+ AC Adapter Power Supply Cord Charger, designed for the Beats Dr. Dre Beatbox Portable Speaker. Please read these instructions carefully before use and retain them for future reference.
Image: The PWR+ AC Adapter with its packaging, showcasing the product's design and branding.
Safety Information
Your PWR+ charger is designed with multiple safety features to ensure reliable operation. It is UL Listed, meaning it has been tested, approved, and certified by UL, a recognized authority in safety science. This certification is authorized by OSHA, a US Federal Agency.
Built-in Safety Protections:
- Short Circuit Protection (SCP): Prevents damage from short circuits.
- Over Current Protection (OCP): Safeguards against excessive current flow.
- Over Voltage Protection (OVP): Protects against voltage surges.
- Over Temperature Protection (OTP): Prevents overheating.
Image: The official UL Listed certification logo, indicating product safety compliance.
Image: Diagram illustrating the internal construction of the power cord with high-grade copper and shielding, and icons representing the built-in safety protections (SCP, OCP, OVP, OTP).
Compatibility
This PWR+ charger is specifically designed for the following models of Beats Dr. Dre Beatbox Portable Speaker:
- Beats Dr. Dre Beatbox Portable Speaker Model: BSC60-180333
- P/N: BSC60180333
- DYS602-180360W
- Ada-65si-19-2 18045g
Please verify your speaker's model number to ensure compatibility before use.
Image: A visual guide showing the compatible Beats Beatbox Portable Speaker model with a green checkmark and incompatible models with a red 'X', to help users confirm their device.
Setup
Follow these steps to set up your PWR+ charger:
- Unpack the PWR+ charger and power cord from its packaging.
- Connect the AC power cord to the charger unit.
- Plug the AC power cord into a standard wall outlet (100-240V).
- Connect the round tip connector of the charger to the power input port on your Beats Dr. Dre Beatbox Portable Speaker.
Image: The PWR+ charger unit with its extra-long 12-foot power cord, illustrating the length for flexible placement.
Operating Instructions
Once connected, the charger will begin supplying power to your Beats Dr. Dre Beatbox Portable Speaker. An indication light on the charger unit will illuminate, confirming that power is being received from the wall outlet.
- Ensure the charger is securely plugged into both the wall outlet and the speaker.
- The charger provides a stable 19V output at 3.42A (2.1A compatible) for efficient charging and operation.
- The extra-long 12 ft power cord allows for flexible placement of your speaker while charging.
Maintenance
To ensure the longevity and optimal performance of your PWR+ charger, follow these maintenance guidelines:
- Cleaning: Disconnect the charger from the power source and the speaker before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly winding the cord to prevent damage.
- Handling: Avoid dropping the charger or subjecting it to strong impacts. Do not pull the cord to disconnect it from the outlet; always grasp the plug.
Troubleshooting
If you encounter issues with your PWR+ charger, consider the following common solutions:
- No Power/Not Charging:
- Ensure the charger is firmly plugged into a working wall outlet. Test the outlet with another device.
- Verify that the charger's connector is fully inserted into the speaker's power port.
- Check the charger's indication light. If it's not illuminated, there might be an issue with the power supply or the charger itself.
- Loose Connection: If the connection feels loose, ensure the speaker's power port is clean and free of debris. The charger features a steel-reinforced tip for durability, but proper insertion is key.
- Overheating: While the charger has Over Temperature Protection, ensure it is used in a well-ventilated area and not covered, which could impede heat dissipation.
If these steps do not resolve the issue, please contact PWR+ customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | PWR+ |
| Model Number | PWR-TAI190237 |
| Input Voltage Range | 100-240V AC |
| Output Voltage | 19V |
| Output Current (Max) | 3.42A (2.1A Compatible) |
| Wattage | 65W |
| Cord Length | 12 ft (Total) |
| Connector Type | Round Tip |
| Safety Certifications | UL Listed, CE, FCC |
| Weight | 0.52 Kilograms |
Warranty and Support
PWR+ stands behind the quality of its products. Your charger comes with the following warranty and support:
- Warranty: 30 Days Refund - 24 Months Exchange.
- Customer Support: PWR+ is a WA, USA-based company with a team of friendly customer support experts ready to assist you.
For warranty claims or technical assistance, please refer to the contact information provided with your purchase or visit the official PWR+ website.
