FLEXISPOT E3LS L-Shaped Electric Height Adjustable Standing Desk User Manual

1. Introduction

Thank you for choosing the FLEXISPOT E3LS L-Shaped Electric Height Adjustable Standing Desk. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new desk. Please read these instructions carefully before use and retain them for future reference.

Image 1.1: The FLEXISPOT E3LS L-Shaped Electric Standing Desk in a modern office environment.

2. Safety Information

To ensure safe operation and prevent injury or damage, please observe the following safety precautions:

• Ensure all components are securely fastened before use.
• Keep children and pets away from the desk during operation.
• Do not place hands or other objects near moving parts.
• Do not overload the desk. The maximum load capacity is 125 kg (275 lbs).
• Only use the desk on a level surface.
• Disconnect power before cleaning or maintenance.
• Do not modify the desk or its components. Use only original FLEXISPOT parts.

3. Package Contents

Please check the package contents against the list below. If any items are missing or damaged, contact customer support.

• Desk Frame Components (Legs, Crossbars, Side Brackets)
• Control Box
• Handset/Keypad
• Power Cable
• All necessary Screws and Tools for assembly (some tools may not be included, refer to assembly steps).
• Instruction Manual

4. Assembly Instructions

Assembly requires two people. Ensure you have enough space and all components before starting.

4.1. Prepare the Workspace

Clear a large, flat area for assembly. Lay down a blanket or cardboard to protect the desk components and your floor.

4.2. Frame Assembly Overview

The FLEXISPOT E3LS features a robust L-shaped frame designed for stability and adjustability. The frame width is extensible from 110cm to 180cm, accommodating various desktop sizes. The height is adjustable from 60cm to 123cm (without desktop).

Image 4.1: Technical drawing illustrating the dimensions and adjustable range of the E3LS desk frame.

4.3. Desktop Compatibility

This frame is suitable for L-shaped tabletops with the following dimensions:

• Main side: 120 cm to 200 cm width, 55 cm to 80 cm depth.
• Return side: 90 cm to 110 cm width, 40 cm to 60 cm depth.

Image 4.2: Diagram detailing the compatible dimensions for an L-shaped desktop.

The frame supports both left-hand and right-hand corner desk configurations.

Image 4.3: Illustration of left-hand and right-hand corner desk configurations.

4.4. Step-by-Step Assembly (General Guide)

1. Attach Feet to Lifting Columns: Secure the desk feet to the bottom of the lifting columns using the provided screws.
2. Assemble Crossbars: Connect the telescopic crossbars between the lifting columns. Adjust the width to match your desktop.
3. Install Side Brackets: Attach the L-shaped side brackets to form the corner section of the frame.
4. Mount Control Box: Secure the control box to the underside of the frame using the designated mounting points.
5. Connect Motors and Handset: Plug the motor cables from each lifting column into the control box. Connect the handset cable to the control box.
6. Attach Desktop: Carefully place your L-shaped desktop onto the assembled frame. Align it and secure it with screws from underneath (screws for desktop attachment may not be included, depending on desktop material).
7. Cable Management: Use cable ties or clips (not always included) to organize and secure all cables to prevent snagging during height adjustments.
8. Connect Power: Plug the power cable into the control box and then into a wall outlet.

5. Operating Instructions

The FLEXISPOT E3LS desk is equipped with an advanced all-in-one keypad for easy height adjustment and memory functions.

Image 5.1: The advanced all-in-one keypad for controlling desk height and settings.

5.1. Basic Height Adjustment

• Press and hold the Up (▲) arrow button to raise the desk.
• Press and hold the Down (▼) arrow button to lower the desk.
• Release the button when the desired height is reached. The digital display shows the exact desk height.

5.2. Memory Presets

The keypad allows you to save up to three preferred heights (seated, standing, or cycling heights).

1. Adjust the desk to your desired height using the Up/Down buttons.
2. Press the M button. The display will show "S-".
3. Within 3 seconds, press one of the number buttons (1, 2, or 3) to save the current height to that preset. The display will show "S-1", "S-2", or "S-3" to confirm.
4. To recall a saved height, simply press the corresponding number button (1, 2, or 3). The desk will automatically move to the stored position.

5.3. Sit/Stand Reminder System

The integrated sit/stand reminder helps you maintain a healthy work routine.

• Press the A button to activate or deactivate the reminder.
• When activated, the desk will alert you when it's time to change your working position (e.g., from sitting to standing). Refer to the full manual for specific reminder interval settings.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your FLEXISPOT desk.

• Cleaning: Wipe the desk surface and frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. Ensure the power is disconnected before cleaning.
• Cable Check: Periodically inspect all cables for wear or damage. Ensure they are securely connected and not pinched.
• Fastener Check: Occasionally check all screws and bolts to ensure they are tight. Retighten if necessary.
• Lubrication: The lifting columns are generally maintenance-free. Do not attempt to lubricate internal components unless specifically instructed by FLEXISPOT support.

7. Troubleshooting

If you encounter issues with your desk, refer to the following common problems and solutions before contacting customer support.

If the problem persists after attempting these solutions, please contact FLEXISPOT customer support.

8. Specifications

9. Warranty and Support

FLEXISPOT products are designed for durability and performance. For specific warranty details, please refer to the warranty card included with your purchase or visit the official FLEXISPOT website. In case of any issues or questions not covered in this manual, please contact FLEXISPOT customer support:

• Website: www.flexispot.com
• Email: Refer to the official website for regional contact information.
• Phone: Refer to the official website for regional contact information.

Please have your model number (E3L-EU) and purchase date ready when contacting support.