Introduction
The Atlantic Maxsteel 12 Tier Shelving unit is designed for organizing and displaying various media collections and other items. Its contemporary style and durable heavy gauge steel wire construction ensure stability and longevity. This manual provides detailed instructions for assembly, usage, maintenance, and troubleshooting to ensure optimal performance and safety.
Safety Information
- Properly install the included wall anchors for added stability. This is crucial to prevent tipping, especially with a tall, narrow unit.
- Always load heavier and larger items on the lower half of the shelves and gradually work your way up. This helps maintain the unit's center of gravity and stability.
- Ensure the unit is placed on a level surface. Use the adjustable feet to compensate for uneven flooring.
- Keep small children and pets away from the unit during assembly to prevent accidents.
- Do not overload shelves beyond their intended capacity.
Package Contents
Before beginning assembly, verify that all components are present. The package should contain:
- Steel Wire Shelves (12 units)
- Vertical Support Rods (multiple sections to form 4 tall rods)
- Shelf Dividers
- Adjustable Leveling Feet
- Plastic Shelf Stoppers/Clips
- Wall Anchoring Hardware
- Assembly Hardware
- Instruction Manual (this document)
If any parts are missing or damaged, please contact Atlantic customer support.
Setup and Assembly
Assembly typically requires one person, but a second person can assist with initial setup. No special tools are required.
Step 1: Prepare the Base Rods and Feet
Locate the four bottom vertical support rods. These rods have threaded holes at one end. Screw the adjustable leveling feet into these threaded holes. Ensure the feet are securely attached but leave them slightly extended for later adjustment.
Image: Adjustable leveling feet attached to the base of a support rod.
Step 2: Attach Shelf Stoppers
Each shelf is supported by four plastic shelf stoppers (clips) that snap onto the vertical rods. Identify the desired height for your first shelf. Snap two halves of a stopper together around each of the four vertical rods at the same height. Ensure they are firmly clicked into place. The rods have grooves to guide placement.
Image: Plastic shelf stopper securely attached to a vertical rod.
Step 3: Install the First Shelf
Carefully slide the first wire shelf down over the four vertical rods until it rests firmly on the installed shelf stoppers. Ensure all four corners of the shelf are evenly seated on their respective stoppers. It is recommended to start with the bottom shelf to create a stable base.
Image: An empty shelving unit, illustrating the structure after installing shelves.
Step 4: Continue Installing Shelves
Repeat Step 2 and Step 3 for the remaining shelves. You can adjust the spacing between shelves in 1-inch increments to accommodate different media sizes (CDs, DVDs, Blu-rays, games, etc.). For optimal stability, ensure the shelf stoppers are at the same height on all four rods for each shelf.
Step 5: Assemble Upper Rod Sections (if applicable)
If your unit includes multiple rod sections, connect the upper rod sections to the lower ones by screwing them together. Then, continue installing the remaining shelves as described in Step 4.
Step 6: Level the Unit and Install Wall Anchors
Once all shelves are installed, stand the unit upright. Adjust the leveling feet by turning them clockwise or counter-clockwise until the unit is stable and does not wobble. For enhanced safety and stability, especially with a tall unit, use the provided wall anchoring hardware to secure the shelving unit to a wall. Follow the instructions included with the wall anchors for proper installation.
Operating and Usage
The Maxsteel 12 Tier Shelving unit is designed for versatile storage. Here are guidelines for optimal use:
- Media Storage: The unit can hold up to 864 CDs, 450 DVDs/Wii Games, or 490 Blu-rays/PS3/PS4/PS5 game discs.
- Adjustable Shelves: Utilize the 1-inch increment adjustments to customize shelf heights for different media formats or other items.
- Shelf Dividers: Place the included shelf dividers on the wire shelves to keep media upright and organized, preventing items from falling over.
Image: The shelving unit fully loaded with various media, demonstrating its storage capacity.
Image: A shelf divider in use, keeping media organized.
Maintenance
To ensure the longevity and appearance of your Atlantic Maxsteel shelving unit, follow these maintenance guidelines:
- Cleaning: Wipe down the steel wire shelves and rods with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the gunmetal finish.
- Inspection: Periodically check all connections, especially the shelf stoppers and wall anchors, to ensure they remain secure. Tighten any loose components.
- Leveling: Re-check the leveling feet occasionally to ensure the unit remains stable, especially if moved or if the floor settles.
- Weight Distribution: Continue to distribute weight evenly across shelves, placing heavier items on lower shelves.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit is wobbly or unstable. | Uneven floor; leveling feet not properly adjusted; wall anchors not installed or loose. | Adjust the leveling feet until the unit is stable. Ensure wall anchors are correctly installed and tightened. |
| Shelves appear bowed or sag in the middle. | Overloading shelves; uneven weight distribution. | Reduce the weight on the affected shelf. Redistribute items to ensure even loading. Place heavier items on lower shelves. |
| Shelf stoppers (clips) do not hold shelves securely. | Stoppers not fully clicked into place; stoppers are damaged. | Ensure both halves of the stopper are fully snapped together and seated in a rod groove. If damaged, contact support for replacements. |
| Difficulty during assembly. | Misunderstanding instructions; attempting to assemble alone. | Review the assembly steps carefully. Consider having a second person assist, especially with the initial shelves. Ensure rod sections are correctly joined. |
Specifications
- Model Number: 38408071
- Material: Alloy Steel
- Color: Gunmetal
- Product Dimensions (D x W x H): 8.13" x 33.38" x 76.76"
- Number of Shelves: 12
- Item Weight: 39.7 pounds
- Capacity: Up to 864 CDs, 450 DVDs/Wii Games, or 490 Blu-rays/PS3/PS4/PS5 game discs
- Special Features: Adjustable shelving, wall mountable, independent adjustable feet
Image: Dimensional diagram of the shelving unit.
Warranty
The Atlantic Maxsteel 12 Tier Shelving unit comes with a 1-year limited manufacturer warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation provided with your product or contact Atlantic customer support.
Customer Support
For assistance with assembly, missing parts, troubleshooting, or warranty inquiries, please contact Atlantic customer support. Visit the official Atlantic website for contact information or refer to the packaging for specific support details.
Online Resources: Visit the Atlantic Store on Amazon