1. Product Overview
The JERRY table lamp features a timeless design and understated elegance. Its combination of a chrome-plated lamp base and a grey fabric lampshade creates a warm and inviting atmosphere. This table lamp is suitable for use as an accent light on a dresser next to a sofa or as a bedside lamp. The lamp has a height of 28.5 cm and a diameter of 13 cm. It uses an E14 socket, compatible with bulbs not exceeding a maximum power of 40 watts.
2. Safety Instructions
- Ensure the power supply is disconnected before assembly, installation, or maintenance.
- This product is designed for indoor use only (IP20 rating). Do not expose to moisture or extreme temperatures.
- Use only E14 bulbs with a maximum wattage of 40W. Exceeding this limit may cause overheating and damage.
- Do not cover the lamp with any materials that could obstruct ventilation.
- Keep the lamp out of reach of children and pets.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
3. Package Contents
Please check that all components are present and undamaged:
- 1 x Lamp Base (Chrome Metal)
- 1 x Fabric Lampshade (Grey)
- 1 x Power Cord with Integrated Switch
Note: The light bulb is not included. A 1 x E14 bulb with a maximum of 40W is required.
4. Assembly and Setup
Follow these steps to assemble your Jerry Table Lamp:
- Unpack Components: Carefully remove all parts from the packaging and place them on a clean, flat surface.
- Attach Lampshade: Place the grey fabric lampshade onto the lamp base, ensuring it sits securely over the E14 lamp holder.
- Install Bulb: Screw an E14 bulb (max. 40W, not included) into the lamp holder until it is firmly seated. Do not overtighten.
- Connect to Power: Plug the power cord into a suitable electrical outlet (230V).
5. Operating Instructions
To operate the Jerry Table Lamp:
- Turning On/Off: Locate the inline switch on the power cord. Press the switch to turn the lamp on or off.
- Bulb Replacement: Ensure the lamp is unplugged from the power outlet and the bulb has cooled down. Unscrew the old bulb and screw in a new E14 bulb (max. 40W).
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your lamp:
- Cleaning: Disconnect the lamp from the power supply before cleaning. Wipe the chrome base with a soft, dry cloth. For the fabric lampshade, use a lint roller or a soft brush to remove dust. Do not use abrasive cleaners or solvents.
- Bulb Care: Replace bulbs as needed. Always ensure the replacement bulb matches the specified type (E14) and maximum wattage (40W).
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power to the outlet. | Check if the outlet is working by plugging in another device. Check circuit breaker. |
| Lamp does not turn on. | Bulb is faulty or not screwed in correctly. | Ensure the bulb is screwed in tightly. Replace the bulb with a new one. |
| Lamp does not turn on. | Inline switch is off. | Press the inline switch to the 'on' position. |
| Flickering light. | Loose bulb or incompatible bulb. | Tighten the bulb. Ensure the bulb is E14 type and within 40W. |
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | R50491011 Jerry |
| Brand | RL LIVE YOUR LIGHT |
| Dimensions (L x W x H) | 15 x 13 x 28.5 cm |
| Weight | 310 g |
| Color | Grey |
| Material | Fabric (Shade), Chrome Metal (Base) |
| Bulb Type | E14 |
| Max Wattage | 40 Watts |
| Voltage | 230 Volts |
| IP Rating | IP20 (Indoor use only) |
| Switch Type | Push-button (Inline) |
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
