SONGMICS ULBS04GY

SONGMICS ULBS04GY 3-Tier Bamboo Shoe Rack Bench Instruction Manual

Model: ULBS04GY

1. Introduction and Safety Information

This manual provides instructions for the assembly, use, and maintenance of your SONGMICS 3-Tier Bamboo Shoe Rack Bench. Please read all instructions carefully before assembly and use.

Important Safety Warnings:

  • Ensure all parts are securely fastened before use.
  • Do not exceed the maximum weight capacity: 286 lb (130 kg) for the bench top and 22 lb (10 kg) for each shelf.
  • Normal creaking sounds may occur with bamboo products; this does not necessarily indicate a defect.
  • Keep children away from small parts during assembly.
  • Use on a flat, stable surface.

2. Package Contents

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

  • Bench Top Panel (1)
  • Shelf Panels (2)
  • Side Frames (2)
  • Screws (various sizes)
  • Nuts (various sizes)
  • Hex Key (1)
  • Wrench (1)
  • Instruction Manual (1)
Diagram showing all parts included for assembly: bench top, two shelves, two side frames, screws, nuts, hex key, and wrench.

Image: All components and tools required for assembling the SONGMICS ULBS04GY shoe rack bench.

3. Assembly Instructions

Follow these steps to assemble your shoe rack bench. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.

  1. Identify all parts and hardware using the package contents list.
  2. Attach the side frames to the bench top panel using the provided screws and nuts. Hand-tighten initially.
  3. Slide the two shelf panels into the designated slots on the side frames.
  4. Secure the shelf panels to the side frames with the remaining screws and nuts.
  5. Once all parts are in place, use the hex key and wrench to fully tighten all screws and nuts. Do not overtighten.
  6. Ensure the bench is stable and all connections are secure before use.
Detailed diagram illustrating the step-by-step assembly process of the shoe rack bench, showing how the top, shelves, and side frames connect with screws and nuts.

Image: Visual guide for assembling the SONGMICS ULBS04GY shoe rack bench.

4. Operating Instructions (Usage)

The SONGMICS 3-Tier Bamboo Shoe Rack Bench is designed for versatile use in various areas of your home.

  • Shoe Storage: The two shelves can hold approximately 6 pairs of shoes, helping to keep your entryway or closet organized.
  • Seating: The sturdy top panel provides a convenient seating area for changing shoes. Ensure the weight limit of 286 lb (130 kg) is not exceeded.
  • Versatile Storage: This bench can also function as a side table, plant stand, or general storage shelf in living rooms, bedrooms, or bathrooms.
SONGMICS shoe rack bench in an entryway, holding shoes on shelves and a cushion on top, with a coat rack on the wall.

Image: The shoe rack bench used in an entryway for shoe storage and seating.

SONGMICS shoe rack bench used as a side table next to a sofa, holding books and a lamp.

Image: The shoe rack bench repurposed as a side table in a living room setting.

Video: A general overview of the SONGMICS shoe rack bench, demonstrating its features and use cases.

5. Maintenance

Proper care will extend the life and appearance of your bamboo shoe rack bench.

  • Cleaning: Wipe the surface with a dry cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
  • Moisture: Bamboo is sensitive to moisture. Avoid prolonged exposure to water or high humidity. If it gets wet, wipe it dry immediately.
  • Sunlight: Avoid placing the bench in direct sunlight for extended periods, as this can cause fading or drying of the bamboo.
Close-up of the bench top showing the single panel with grooves design, highlighting its easy-to-clean and sturdy features.

Image: Detail of the grooved bench top, designed for easy cleaning and enhanced sturdiness.

6. Troubleshooting

If you encounter any issues with your shoe rack bench, refer to the following common solutions:

  • Bench feels wobbly:
    • Ensure all screws and nuts are fully tightened.
    • Verify the bench is placed on a flat, even surface.
  • Creaking sounds:
    • As a natural bamboo product, minor creaking sounds are normal, especially when weight is applied. This typically does not affect structural integrity.
  • Difficulty assembling:
    • Re-check the assembly instructions and ensure all parts are oriented correctly.
    • Do not force parts together; if a part does not fit, re-examine the diagram.

7. Specifications

Model NumberULBS04GY
Product Dimensions (D x W x H)11.3" x 27.6" x 17.8" (28.7 cm x 70.1 cm x 45.2 cm)
ColorGrey
MaterialBamboo
Item Weight8.8 pounds (4 kg)
Maximum Weight Capacity (Bench Top)286 pounds (130 kg)
Maximum Weight Capacity (Each Shelf)22 pounds (10 kg)
Diagram showing the dimensions of the SONGMICS shoe rack bench: 11.3 inches deep, 27.6 inches wide, and 17.8 inches high, with shelf heights indicated and a maximum weight capacity of 286 lb.

Image: Detailed dimensions and maximum weight capacity of the shoe rack bench.

8. Warranty and Support

For warranty information or customer support, please refer to the documentation included with your purchase or contact the retailer. You can also visit the official SONGMICS store for more information:

SONGMICS Official Store

Related Documents - ULBS04GY

Preview SONGMICS LMR028 8-Tier Shoe Rack Assembly Instructions
This document provides assembly instructions for the SONGMICS LMR028 8-Tier shoe rack. It includes a detailed parts list and step-by-step guidance for constructing the shoe organizer, designed for storing shoes with a maximum static load capacity of 8 kg per shelf. Safety warnings regarding small parts and assembly procedures are also included.
Preview SONGMICS ULBS120 2-Tier Shoe Bench Instruction Manual
Official instruction manual for the SONGMICS ULBS120 2-Tier Shoe Bench. Provides parts list and step-by-step assembly instructions for this entryway storage furniture.
Preview SONGMICS 8-Tier Shoe Rack Assembly Instructions
Concise assembly guide for the SONGMICS LSR024/24 8-Tier Shoe Rack, including parts list, step-by-step instructions, and general usage guidelines.
Preview Songmics Shoe Bench Assembly Instructions
This document provides assembly instructions for the Songmics Shoe Bench, model LHS10. It includes general guidelines, notes, and warnings for safe and proper assembly and use.
Preview SONGMICS RXJ10 10-Tier Shoe Rack Assembly Instructions
Detailed assembly instructions and parts list for the SONGMICS RXJ10 10-Tier Shoe Rack. Learn how to build your shoe storage solution with clear steps and part identification.
Preview SONGMICS LSR110 Shoe Rack Assembly Instructions and Safety Guide
Comprehensive assembly instructions for the SONGMICS LSR110 10-tier shoe rack. Includes a detailed parts list, step-by-step assembly guide with textual descriptions of diagrams, and essential safety warnings. Learn how to safely assemble and use your SONGMICS shoe rack.