BlueStars W10082853 Dishwasher Tine Pivot Clip Instruction Manual

1. Introduction

The BlueStars W10082853 Dishwasher Tine Pivot Clip is a replacement part designed to secure your dishwasher's upper rack. This clip helps prevent the rack from wobbling or coming off track during the wash cycle, ensuring thorough cleaning of your dishes. It is made from heavy-duty ABS plastic, offering excellent wear resistance and a non-cracking design, capable of withstanding temperatures up to 250°F.

2. Safety Information

Always prioritize safety. Before attempting any repair or installation, ensure the following:

Disconnect both the power and water supply to the dishwasher.
Wear appropriate work gloves to protect your hands.
If you are unsure about any step, consult a qualified technician.

3. Product Overview

The W10082853 Tine Pivot Clip is a small but crucial component for maintaining the stability of your dishwasher's upper rack. It is designed to snap onto the tine row, providing a secure pivot point.

BlueStars W10082853 Dishwasher Tine Pivot Clip with dimensions — Figure 1: Detailed view of the W10082853 Dishwasher Tine Pivot Clip, showing its dimensions (approximately 2.8 inches long and 0.5 inches high).

Two BlueStars W10082853 Dishwasher Tine Pivot Clips held in hands — Figure 2: Two W10082853 Tine Pivot Clips, highlighting their design and construction.

4. Compatibility

The W10082853 Tine Pivot Clip is compatible with various dishwasher models from top brands including Whirlpool, Kenmore, KitchenAid, and Jenn-Air. It replaces part numbers: #WPW10082853, WPW10082853VP, PS11748190, and 1446946.

Important Note: Always verify compatibility with your specific dishwasher model number before purchasing. If you are uncertain, please consult your appliance manual or contact customer support.

Table of compatible dishwasher models for W10082853 Tine Pivot Clip — Figure 3: Partial list of compatible dishwasher models for the W10082853 Tine Pivot Clip.

5. Installation Instructions

Follow these steps for a straightforward installation:

Prepare for Installation: Ensure both the power and water supply to your dishwasher are disconnected. Wear work gloves for safety.
Access the Upper Rack: Pull out the dishwasher's upper rack completely.
Identify Old Clip Location: Note the position of the old tine pivot clip if it is still intact.
Remove Old Clip: Lift the release tab on the old clip and carefully detach it from the tine row.
Install New Clip: Position the new W10082853 Tine Pivot Clip onto the tine row. Hook its side tab into place, then firmly snap the clip onto the upper tine row until it is secure.

Two images showing dishwasher tine pivot clip installation steps — Figure 4: Visual guide for installing the W10082853 Tine Pivot Clip. Step 1 shows pulling out the upper rack, and Step 2 shows detaching the old clip and installing the new one.

Installation Video Guide

Video 1: "Ultra Durable W10082853 Dishwasher Tine Pivot Clip" - A detailed video demonstrating the installation and features of the W10082853 Tine Pivot Clip.

Video 2: "W10082853 Dishwasher Tine Pivot Clip" - Another instructional video focusing on the W10082853 Dishwasher Tine Pivot Clip.

6. Maintenance

To ensure the longevity and optimal performance of your W10082853 Tine Pivot Clip:

Periodically inspect the clips for any signs of wear, cracks, or damage.
Clean the clips as part of your regular dishwasher maintenance to prevent buildup that could hinder their function.
Avoid excessive force when loading or unloading the dishwasher rack, as this can stress the clips.

7. Troubleshooting

The W10082853 Tine Pivot Clip is designed to resolve specific issues related to your dishwasher's upper rack. If you experience any of the following symptoms, replacing a damaged clip may be the solution:

Loose or Wobbly Rack: If your upper dishwasher rack feels unstable or moves excessively during operation, a worn or broken tine pivot clip is a common cause.
Dishes Not Cleaning Properly: A wobbly rack can prevent proper water circulation and spray coverage, leading to poorly cleaned dishes.

Image showing symptoms fixed by the W10082853 Tine Pivot Clip: not cleaning dishes properly, loose or wobbly rack, not draining dishes properly — Figure 5: Common dishwasher issues that can be resolved by replacing the W10082853 Tine Pivot Clip.

General DIY Repair Video

Video 3: "Why Call the Repair Guy?" - A general video promoting DIY repairs for various appliances, including dishwashers.

8. Specifications

Feature	Detail
Model Number	W10082853
Material	Heavy-duty ABS Plastic (BPA-free)
Color	As Pictured (typically gray)
Item Weight	0.04 Pounds
Included Components	W10082853 Dishwasher Tine Pivot Clip
Heat Endurance	Up to 250°F

9. Warranty & Support

Warranty: There is no explicit warranty description provided for this product.

Support: For any questions regarding installation, compatibility, or product performance, please contact BlueStars customer support. We are committed to providing affordable, high-quality replacement parts and ensuring your satisfaction with our products.

"We make your life more comfortable and convenient by doing your own repairs with our economical solutions."