1. Introduction
The TESmart 4K HDMI Splitter 1 in 2 Out (Model HSP0102A1U) is designed to distribute a single HDMI source signal to two HDMI displays simultaneously. It supports high-performance video resolutions up to 4K@60Hz, including HDCP, HDR, and 3D video, with a data rate of 18 Gbps. This device ensures crystal clear video and audio without lag or blurring, making it suitable for various applications.
What's in the Box
- 1 x TESmart 4K HDMI Splitter 1 in 2 Out
- 1 x 5V DC Power Adapter
- 1 x User Manual

Image: Contents of the TESmart 4K HDMI Splitter package, including the splitter unit, power adapter, and user manual.
2. Safety Information
Please read and follow these safety guidelines to ensure proper operation and prevent damage to the device or injury.
- Do not expose this unit to water, moisture, or excessive humidity.
- Ensure proper ventilation around the device. Avoid placing it in enclosed spaces or on soft surfaces that may block airflow. Note: Some users have reported the device running hot. Adequate ventilation is crucial for optimal performance and longevity.
- Use only the provided power adapter. Using an incorrect power supply may damage the device and void the warranty.
- Do not attempt to open or repair the unit. Refer all servicing to qualified personnel.
- Keep the device away from heat sources, direct sunlight, and strong magnetic fields.
3. Product Overview
Features
- Distributes 1 HDMI source to 2 HDMI displays simultaneously.
- Supports resolutions up to 4K@60Hz (3840x2160@60Hz 4:4:4).
- Compatible with HDCP, HDR, and 3D video.
- 18 Gbps data rate for no lag or blurring.
- Supports various audio formats: LPCM 7.1, Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio.
- Features 3 EDID modes for flexible display compatibility.
- Compact and durable aluminum alloy housing with efficient heat dissipation.
Ports and Indicators

Image: Rear panel of the HDMI splitter, detailing the DC 5V power input, one HDMI Input port, and two HDMI Output ports (Output 1 and Output 2).

Image: Front panel of the HDMI splitter, showing the Power LED, individual HDMI Output Status LEDs (1 and 2), and the Mode button for EDID settings.
4. Setup
Follow these steps to connect your TESmart 4K HDMI Splitter:
- Power Off Devices: Ensure all HDMI source devices (e.g., Blu-ray player, game console) and display devices (e.g., TV, monitor) are powered off before making connections.
- Connect HDMI Source: Connect your HDMI source device to the 'INPUT' port on the HDMI splitter using a high-quality HDMI cable.
- Connect HDMI Displays: Connect your two HDMI display devices to the 'OUTPUT 1' and 'OUTPUT 2' ports on the HDMI splitter using high-quality HDMI cables.
- Connect Power Adapter: Plug the 5V DC power adapter into the 'DC 5V' port on the splitter, then plug the adapter into a power outlet. The Power LED on the splitter will illuminate.
- Power On Devices: Power on your HDMI display devices first, then power on your HDMI source device.
- Verify Connection: The HDMI Output Status LEDs (1 and 2) on the splitter should light up, indicating a successful connection to the displays.

Image: Connection diagram illustrating how to connect various HDMI source devices to the splitter's input and two HDMI displays to its outputs.
5. Operating Instructions
EDID Management
The TESmart HDMI Splitter features three EDID (Extended Display Identification Data) modes to ensure compatibility with various display devices and optimize resolution output. EDID is data that a digital display sends to a source device to describe its capabilities.
To change the EDID mode, use a pointed object (like a pen tip) to press the 'Mode' button on the front panel. The corresponding LED will blink to indicate the selected mode. After changing the mode, it is recommended to restart the splitter by cycling its power to apply the setting.
Video: This video provides a visual guide to the basic operation of the HDMI splitter, including how to identify HDMI output status and the function of the EDID mode button.
Video: A demonstration on how to configure the EDID modes on a TESmart HDMI Splitter, illustrating the LED feedback and the resulting display resolutions for connected screens.
EDID Mode Descriptions:
- Mode 1 (LED 1 Blinking): The splitter will output the best possible resolution that all connected HDMI displays can support. This ensures all displays receive a signal, prioritizing the lowest common resolution if displays have different capabilities.

Image: EDID Mode 1 explanation, showing a 4K@60Hz source outputting 1080P to both a Full-HD TV and an Ultra-HD TV, as the splitter prioritizes the lower resolution of the connected displays.
- Mode 2 (LED 2 Blinking): This mode allows the splitter to output both 1080P@60Hz and 4K@60Hz simultaneously to different displays, if supported. It is compliant with displays of both 4K@60Hz and 1080P@60Hz.

Image: EDID Mode 2 explanation, showing a 4K@60Hz source outputting 1080P to a Full-HD TV and 4K@60Hz to an Ultra-HD TV simultaneously, accommodating different display capabilities.
- Mode 3 (LED 1 and LED 2 Blinking): The output resolution is determined solely by the display connected to 'OUTPUT 1'. The HDMI source will recognize the capabilities of the display on Output 1, and the splitter will deliver the same signal to Output 2. If Output 1 is disconnected or incompatible, Output 2 may not receive a signal.

Image: EDID Mode 3 explanation, demonstrating that the resolution of the display connected to Output 1 determines the output resolution for both displays. This ensures consistent output based on the primary display's capabilities.
6. Maintenance
To ensure the longevity and optimal performance of your HDMI splitter, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Do not use liquid or aerosol cleaners.
- Storage: When not in use for extended periods, store the splitter in a cool, dry place away from direct sunlight and extreme temperatures.
- Cable Management: Ensure HDMI cables are not bent sharply or under excessive strain, as this can damage the cables or ports.
7. Troubleshooting
If you encounter issues with your TESmart HDMI Splitter, refer to the following common problems and solutions:
No Signal or Intermittent Signal
- Check Cables: Ensure all HDMI cables are securely connected to the input and output ports. Try replacing cables with known good, high-quality HDMI 2.0 or higher cables, especially for 4K@60Hz signals.
- Power Cycle: Disconnect and reconnect the power adapter to the splitter. Also, power cycle your source and display devices.
- EDID Mode: Experiment with different EDID modes (see Section 5) to find the most compatible setting for your displays. Restart the splitter after changing the EDID mode.
- Source/Display Compatibility: Verify that your source device and displays support the desired resolution and refresh rate.
Incorrect Resolution or Picture Quality Issues
- EDID Mode: Adjust the EDID mode (Section 5) to match the capabilities of your displays. Mode 1 attempts to find a common resolution, while Mode 2 allows for different resolutions.
- Cable Length: For 4K@60Hz, ensure HDMI cable lengths are within recommended limits (e.g., up to 3m input + 5m output). Longer cables may require active HDMI cables or signal boosters.
- HDR/Deep Color: If experiencing issues with HDR or Deep Color, ensure all connected devices and cables support these features.
No Audio or Poor Audio Quality
- Audio Settings: Check the audio output settings on your source device.
- EDID Mode: Some EDID modes might affect audio compatibility. Try different EDID modes.
- Cable Integrity: Ensure HDMI cables are not damaged.
Device Overheating
- Ventilation: Ensure the splitter is placed in a well-ventilated area. Do not cover the device or place it in an enclosed space.
- Ambient Temperature: Avoid operating the device in excessively hot environments.
- Power Supply: Confirm you are using the original 5V DC power adapter.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | HSP0102A1U |
| Product Dimensions | 4.8 x 2.13 x 0.94 inches |
| Item Weight | 13.6 ounces |
| Connector Type | HDMI |
| Cable Type | HDMI |
| Supported Resolutions | Up to 3840x2160@60Hz 4:4:4, 1080P Full 3D |
| Data Rate | 18 Gbps |
| Color Depth | 36 bit/pixel Deep Color |
| HDCP Compliance | Yes |
| HDR Support | Yes |
| Audio Formats | LPCM 7.1, Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio |
| Compatible Devices | Blu-Ray Player, DVD Player, Gaming Console (PS3/4, Xbox, Switch), Monitor, Television, Set-top boxes, Apple TV, Fire TV Stick |
| Power Supply | DC 5V |
9. Warranty and Support
TESmart provides the following support for this product:
- Manufacturer Warranty: This product is covered by a 1-Year Manufacturer Warranty from the date of purchase.
- Technical Support: Free lifetime technical support is available for all TESmart products.
For warranty claims, technical assistance, or any product-related inquiries, please contact TESmart customer support through their official website or the retailer where the product was purchased.