YING RAY HA-HA-06-01
Contents
YING RAY Replacement Remote Control User Manual
Model: HA-HA-06-01 (Replacement for FEDDERS Air Conditioner Remote Control)
Introduction
This user manual provides detailed instructions for the operation and maintenance of your YING RAY HA-HA-06-01 replacement remote control. This remote is specifically designed as a compatible replacement for various FEDDERS air conditioner models. Please read this manual thoroughly before use to ensure proper functionality and to extend the life of your remote control.
Safety Information
- Do not expose the remote control to direct sunlight, high temperatures, or high humidity.
- Avoid dropping or subjecting the remote control to strong impacts.
- Do not mix old and new batteries, or different types of batteries.
- Remove batteries if the remote control will not be used for an extended period to prevent leakage.
- Keep batteries out of reach of children. If swallowed, seek immediate medical attention.
Product Overview
The YING RAY HA-HA-06-01 remote control is designed for ease of use, featuring essential buttons for controlling your FEDDERS air conditioner.

Figure 1: Front view of the YING RAY HA-HA-06-01 replacement remote control.

Figure 2: Remote control with compatibility and no programming needed information.
Button Functions:
- ON/OFF: Powers the air conditioner on or off.
- MODE: Cycles through operating modes (e.g., Cool, Fan, Dry, Heat, Auto).
- SPEED: Adjusts fan speed (e.g., Low, Medium, High, Auto).
- TIMER: Sets the timer for automatic on/off operations.
- TEMP/TIME (▲/▼): Adjusts temperature settings or timer duration.
Setup
Battery Installation:
- Locate the battery compartment on the back of the remote control.
- Slide open the battery cover.
- Insert two (2) AAA 1.5V ordinary batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment. (Batteries are not included)
- Close the battery cover securely.
The remote control is ready for use immediately after battery installation. No programming is required.
Operating Instructions
Point the remote control directly at the air conditioner's receiver when operating.
Basic Operation:
- To Turn On/Off: Press the ON/OFF button.
- To Change Mode: Press the MODE button repeatedly to cycle through available modes (e.g., Cool, Fan, Dry).
- To Adjust Fan Speed: Press the SPEED button repeatedly to select desired fan speed.
- To Set Temperature: Use the TEMP/TIME ▲ button to increase temperature and TEMP/TIME ▼ button to decrease temperature.
Timer Function:
The TIMER button allows you to set a specific time for the air conditioner to turn on or off automatically.
- Press the TIMER button.
- Use the TEMP/TIME ▲ or ▼ buttons to adjust the desired time.
- Press the TIMER button again to confirm the setting.
Compatibility
This YING RAY HA-HA-06-01 remote control is a direct replacement for FEDDERS air conditioner remote control model 112150010006. It is compatible with the following FEDDERS air conditioner models:
- A2D24E7DG-B
- A2D24E7DG-D
- A2D24E7E-E
- A2D24E7E-F
- A2D24E7E-G
- A3D18E7B-D
- A3Q05F2AG-L
- A3Q08F2E-D
- A6D18E7A-C
- A6D18E7A-D
- A6D18E7A-E
- A6D24E7A
- A6D24E7A-A
- A6D24E7A-B
- A6D24E7A-C
- A6D24E7A-K
- A6D24E7A-L
- A6D24E7C
- A6D24E7C-A
- A6D24E7D
- A6J12E2A-A
- A6J12E2A-B
- A6J12E7A-A
- A6J12E7A-B
- A6K32E7B
- A6K32E7C
- A6K32E7C-C
- A6P09S2A
- A6Q08F2A
- A6Q08F2A-A
- A6Q08F2A-C
- A6Q10F2A
- A6Q10F2A-A
- A6Q10F2A-B
- A6Q10F2A-C
- A6Q10F2A-D
- A6Q10F2A-E
- A6Q10F2D
- A6T12F2A
- A6T12F2A-A
- A6T12F2A-E
- A6T12F2A-F
- A6U10W2A-B
- A6U10W2A-C
- A6U10W7A-A
- A6U10W7A-B
- A6U10W7A-C
- A6U10W7A-D
- A6U12W2B-A
- A6U12W2B-B
- A6U12W2B-C
- A6U12W2B-D
- A6U12W7B-A
- A6U12W7B-B
- A6U12W7B-C
- A6U12W7B-D
- A6U12W7F-A
- A6U12W7F-B
- A6U12W7F-C
Note: This is not a universal remote control. It is only compatible with the models listed above and those that use the original remote control model 112150010006.
Maintenance
- Clean the remote control regularly with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- If the remote control is not responding, check the batteries. Replace them if they are depleted or if the remote has been stored for a long time.
- Ensure there are no obstructions between the remote control and the air conditioner's receiver.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control not working. | Batteries are dead or inserted incorrectly. | Replace batteries with new AAA 1.5V batteries, ensuring correct polarity. |
| Remote control range is poor. | Weak batteries or obstruction. | Replace batteries. Ensure no objects are blocking the signal path to the air conditioner. |
| Air conditioner does not respond to commands. | Remote control incompatibility or air conditioner issue. | Verify your air conditioner model is listed in the compatibility section. If it is, ensure the air conditioner is powered on and functioning correctly. |
Specifications
- Model: HA-HA-06-01
- Compatible with: FEDDERS Air Conditioner Remote Control Model 112150010006 and listed AC models.
- Power Source: 2 x AAA 1.5V Batteries (Not Included)
- Material: ABS Plastic
- Color: White (as per item picture)
- Special Feature: Ergonomic design
Warranty and Support
For any questions or concerns regarding your YING RAY replacement remote control, please contact the seller or manufacturer directly. Information regarding specific warranty terms may be provided at the point of purchase or by contacting the manufacturer.
Manufacturer: ZHUHAI YINGRAY TRADING CO., LTD.
If you are unsure about compatibility or require further assistance, please reach out to customer support with your air conditioner's model number.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.