FIDECO USB 3.0 Dual Bay HDD/SSD Docking Station (Model Y-482H) User Manual

1. Product Overview

The FIDECO USB 3.0 Dual Bay HDD/SSD Docking Station (Model Y-482H) provides a convenient solution for connecting 2.5-inch and 3.5-inch SATA I/II/III hard drives and solid-state drives to your computer via USB 3.0. It also features an offline clone function, allowing you to duplicate drives without a computer connection.

Key features include high-speed data transfer up to 5Gbps, broad operating system compatibility, and a stable power supply for reliable operation.

Image 1.1: FIDECO USB 3.0 Dual Bay HDD/SSD Docking Station.

2. Safety Information

• Ensure the power adapter is securely connected to a stable power source.
• Do not expose the device to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the device to strong impacts.
• Do not attempt to disassemble or repair the device yourself. Contact support if issues arise.
• Always handle hard drives carefully to prevent damage.
• Disconnect the power adapter before inserting or removing drives, especially during offline cloning.

3. Package Contents

Please check the package for the following items:

• FIDECO USB 3.0 Dual Bay HDD/SSD Docking Station
• USB 3.0 Data Cable
• 12V/3A Power Adapter
• User Manual

Image 3.1: Contents of the FIDECO Docking Station package.

4. Product Diagram

Image 4.1: Front and rear view of the docking station with labeled components.

1. Disk Slots: For inserting 2.5-inch or 3.5-inch SATA HDDs/SSDs.
2. Power LED: Indicates power status.
3. Disk Activity LEDs (25%, 50%, 75%, 100%): Indicate cloning progress or disk activity.
4. Clone Button: Initiates the offline cloning process.
5. USB 3.0 Ports: For connecting to a computer or other USB devices.
6. DC 12V Input: For connecting the power adapter.
7. Power Switch: Turns the device on or off.

5. Setup Instructions

5.1. Connecting to a Computer (Online Mode)

1. Insert SATA HDD/SSD: Gently slide your 2.5-inch or 3.5-inch SATA HDD/SSD into the disk slot(s) until it is firmly seated. Ensure the drive is inserted correctly with the SATA connector aligned.
2. Connect USB Cable: Connect one end of the provided USB 3.0 cable to the docking station's USB 3.0 port and the other end to an available USB 3.0 port on your computer.
3. Connect Power Adapter: Plug the 12V/3A power adapter into the DC 12V input port on the docking station, then plug the adapter into a power outlet.
4. Power On: Flip the power switch on the back of the docking station to the "ON" position. The power LED will illuminate.
5. Drive Recognition: Your computer should automatically detect the connected drive(s). For new drives, you may need to initialize and format them through Disk Management (Windows) or Disk Utility (Mac OS) before use.

Image 5.1: Step-by-step connection process for the docking station.

6. Operating Instructions

6.1. Data Transfer (Online Mode)

Once the docking station is connected to your computer and powered on, the inserted drives will appear as external storage devices. You can drag and drop files, copy, paste, or perform any standard file operations as you would with any other external drive.

The USB 3.0 interface supports transfer speeds up to 5Gbps, ensuring fast data access and backup.

Image 6.1: High-speed data transfer via USB 3.0.

6.2. Offline Clone Function (Stand-alone Duplication)

The offline clone function allows you to duplicate a source drive to a target drive without needing a computer. This is ideal for system backups or upgrading to a larger drive.

Important Notes:

• The target drive must be equal to or larger in capacity than the source drive.
• All data on the target drive will be erased during the cloning process. Back up any important data from the target drive before proceeding.
• Do not connect the docking station to a computer during the offline clone process.

Steps for Offline Cloning:

1. Ensure Power Off: Make sure the docking station is powered off and disconnected from any computer.
2. Insert Drives:
   • Insert the Source Drive (the drive you want to copy from) into Slot 1 (Source HDD).
   • Insert the Target Drive (the drive you want to copy to) into Slot 2 (Target HDD).
3. Connect Power: Connect the 12V/3A power adapter to the docking station and plug it into a power outlet.
4. Initiate Clone: Press and hold the Clone Button for approximately 3 seconds until the progress LEDs (25%, 50%, 75%, 100%) begin to flash.
5. Monitor Progress: The progress LEDs will light up sequentially to indicate the cloning status. Each LED represents 25% completion.
6. Completion: When all four progress LEDs (25%, 50%, 75%, 100%) remain steadily lit, the cloning process is complete.
7. Power Off and Remove: Turn off the docking station, disconnect the power adapter, and then safely remove the drives.

Image 6.2: Offline cloning process illustration.

7. Maintenance

• Keep the docking station clean and free from dust. Use a soft, dry cloth for cleaning.
• Store the device in a cool, dry place when not in use.
• Avoid blocking the ventilation openings to prevent overheating.
• Always safely eject drives from your computer before powering off the docking station or disconnecting the USB cable to prevent data corruption.

8. Troubleshooting

9. Specifications

Image 9.1: Drive compatibility and maximum capacity.

10. Warranty and Support

The FIDECO USB 3.0 Dual Bay HDD/SSD Docking Station comes with an 18-month warranty from the date of purchase, ensuring peace of mind for your investment. This product has also acquired the PSE mark, indicating compliance with Japanese electrical appliance safety standards.

If you have any questions, concerns, or require technical assistance, please do not hesitate to contact our support team:

• Email: support@fideco.cn

We are committed to providing high-quality products and an excellent user experience.