1. Introduction
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Braytron 12W Warm White LED Recessed Spotlights. These ultra-slim LED panels are designed for various indoor applications, offering high luminous power and energy efficiency.
The product features a compact, flat design with a low installation depth, making it suitable for ceilings in living rooms, kitchens, offices, and commercial spaces.
2. Safety Information
- Always disconnect power before installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician in accordance with local electrical codes.
- Do not modify the product in any way. Unauthorized modifications may void the warranty and pose safety risks.
- Ensure the product is suitable for the intended environment. This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. It is intended for indoor use only.
- Keep packaging materials out of reach of children.
- Do not look directly into the LED light source when it is illuminated.
3. Package Contents
The package includes the following components:
- 2 x Braytron 12W Warm White LED Slim Panels
- 2 x Integrated Transformers (pre-mounted)
- 2 x Mounting Clips (pre-mounted)
Figure 1: Braytron 12W Warm White LED Recessed Spotlight (front view).
Figure 2: Rear view of the LED spotlight showing the pre-mounted transformer and spring clips for installation.
4. Setup and Installation
- Preparation: Ensure the power supply to the installation area is turned off at the main circuit breaker.
- Cut-out: Create a circular opening in the ceiling with a diameter of approximately 155 mm (6.1 inches). Refer to Figure 3 for detailed dimensions.
- Wiring: Connect the pre-mounted transformer to the AC 220-240V / 50/60 Hz power supply. Ensure all connections are secure and insulated.
- Mounting: Gently push the spring-loaded mounting clips on the sides of the spotlight upwards. Insert the spotlight into the prepared ceiling opening. The clips will spring back into place, securing the spotlight firmly against the ceiling.
- Final Check: Once installed, restore power and test the light.
Figure 3: Dimensional drawing. Outer diameter: 172mm, Inner diameter (cut-out): 155mm, Height: 20mm.
5. Operating Instructions
The Braytron LED Recessed Spotlight operates by connecting to a standard wall switch. Once properly installed and connected to the power supply, simply use the wall switch to turn the light on or off. The LED panel provides instant full brightness without any warm-up delay.
This product is not dimmable according to the product data sheet (Figure 4).
6. Maintenance
- Cleaning: Ensure the power is off before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the LED panel. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check for any visible damage to the light fixture or wiring. If damage is found, disconnect power and consult a qualified technician.
- Lamp Replacement: The LED light source is integrated and not user-replaceable. The product has a long average lifespan of 30,000 hours.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Loose wiring connection. Faulty switch. | Check the circuit breaker. Ensure all wiring connections are secure (with power off). Test the switch or consult an electrician. |
| Light flickers. | Unstable power supply. Loose connection. | Ensure stable power supply. Check wiring connections (with power off). |
| Light is dim. | Incorrect voltage. Dust accumulation. | Verify the power supply voltage is 220-240V AC. Clean the surface of the LED panel. |
If the problem persists after attempting these solutions, please contact a qualified electrician or the product supplier for assistance.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Braytron |
| Model Number | LD-426-2x |
| Power Consumption | 12 W |
| Luminous Flux | 910 lm |
| Color Temperature | 3000 K (Warm White) |
| Beam Angle | 110° |
| Input Voltage | AC 220-240 V / 50/60 Hz |
| Energy Efficiency Class | F (formerly A+) |
| Shape | Round |
| Material | Aluminum frame, Glass diffuser |
| Outer Diameter | 172 mm |
| Cut-out Diameter | 155 mm |
| Height | 20 mm |
| IP Rating | IP20 |
| Average Lifespan | 30,000 Hours |
| Certifications | CE, RoHS |
| Dimmable | No |
Figure 4: Product Data Sheet (German). For detailed energy information, refer to the EPREL database.
Figure 5: EU Energy Label indicating energy efficiency class F (new rating system).
9. Warranty and Support
Information regarding specific warranty terms and conditions for this product is not provided in this manual. Please refer to your purchase documentation or contact your retailer for details on warranty coverage and customer support.
For technical assistance or inquiries, please contact Braytron customer service or your local distributor.
