1. Product Overview
The IKEA Ansluta LED Driver, model 904.058.45, is designed to power IKEA LED lighting products. This 19W driver provides a stable power supply for compatible LED lights, ensuring optimal performance and longevity. It features a cord for connection to a power outlet and multiple output ports for connecting several LED light units.
Figure 1: Components of the IKEA Ansluta LED Driver. This image displays the main components: a white power adapter with a two-prong plug, a white distribution box with multiple output ports, and a white cord connecting the adapter to the distribution box, with an additional output connector.
2. Setup and Installation
Follow these steps to correctly set up your IKEA Ansluta LED Driver:
- Unpack Components: Carefully remove all items from the packaging. Verify that you have the LED driver unit, power cord, and any associated connectors.
- Choose Location: Select a dry, indoor location for the driver, away from direct sunlight, heat sources, and moisture. Ensure adequate ventilation.
- Connect LED Lights: Connect your compatible IKEA LED lighting units to the output ports on the Ansluta distribution box. Ensure each connection is secure. The driver supports multiple LED units up to a total combined wattage of 19W.
- Connect Power Cord: Plug the power cord from the LED driver into a standard electrical outlet (100-240V, 50-60Hz).
- Test Functionality: Turn on the power to the outlet. Your connected LED lights should illuminate. If they do not, refer to the Troubleshooting section.
Important: Do not exceed the maximum wattage of 19W for connected LED lights. Only use with IKEA Ansluta compatible LED products.
3. Operating Instructions
The IKEA Ansluta LED Driver operates automatically once connected to power and compatible LED lights. It provides a constant power supply to the connected lighting units.
- Power On/Off: The driver itself does not have an on/off switch. Control of the connected lights is typically managed by an external switch or a compatible IKEA wireless dimmer/remote control, if part of your lighting system.
- Compatibility: This driver is designed for use with IKEA Ansluta series LED lights. Ensure all connected lights are compatible to prevent damage.
4. Care and Maintenance
To ensure the longevity and proper functioning of your LED driver, follow these maintenance guidelines:
- Cleaning: Disconnect the driver from the power outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the unit.
- Environment: Keep the driver in a dry, indoor environment. Avoid exposure to extreme temperatures, humidity, or dust.
- Inspection: Periodically inspect the power cord and connections for any signs of damage. If any damage is observed, discontinue use and replace the unit.
Caution: Do not attempt to open or repair the LED driver. There are no user-serviceable parts inside. Unauthorized repairs will void any warranty.
5. Troubleshooting
If you encounter issues with your IKEA Ansluta LED Driver, consult the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights do not turn on. |
|
|
| Lights flicker or dim. |
|
|
| Driver feels hot. |
|
|
If the problem persists after attempting these solutions, contact IKEA customer support.
6. Technical Specifications
| Model Number | 904.058.45 |
| Brand | IKEA |
| Type | LED Driver |
| Max Output Wattage | 19 Watts |
| Input Voltage | 100-240 Volts AC |
| Input Frequency | 50-60 Hertz |
| Indoor/Outdoor Usage | Indoor |
| Material | Copper (internal components), Plastic (housing) |
| Item Weight | 7.9 ounces (approx. 224 grams) |
| Special Feature | Instant On |
7. Warranty Information
IKEA products typically come with a limited warranty. For specific warranty terms and conditions applicable to the Ansluta LED Driver (Model 904.058.45), please refer to the warranty documentation provided with your purchase or visit the official IKEA website. Keep your proof of purchase for warranty claims.
8. Customer Support
For further assistance, technical support, or to report issues with your IKEA Ansluta LED Driver, please contact IKEA customer service:
- Online: Visit the official IKEA Customer Service website.
- Phone: Check the IKEA website for the customer service phone number in your region.
- In-Store: Visit your local IKEA store for assistance.
When contacting support, please have your product model number (904.058.45) and proof of purchase readily available.
