Amazon Basics Commercial Outdoor Patio Heater User Manual

Introduction

This manual provides essential information for the safe assembly, operation, and maintenance of your Amazon Basics Commercial Outdoor Patio Heater. Designed for outdoor use, this heater provides significant warmth for patios, restaurants, and other outdoor spaces. Please read this manual thoroughly before assembly or operation and retain it for future reference.

Figure 1: The Amazon Basics Commercial Outdoor Patio Heater in Bahama Blue, showcasing its full design and color.

Important Safety Information

WARNING: For outdoor use only. Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Read the installation, operating, and maintenance instructions thoroughly before installing or servicing this equipment.

• Always operate the heater in a well-ventilated outdoor area.
• Keep clear of combustible materials. Maintain a minimum clearance of 3 feet from sides and 2 feet from top to any combustible surfaces.
• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
• Ensure the heater is on a firm, level surface to prevent tipping. The safety auto shut-off tilt valve will activate if the heater tips over.
• Always secure the patio heater when not in use to avoid potential damage or hazards.
• Keep children and pets away from the heater.
• Do not attempt to repair or alter the heater. Contact qualified service personnel for repairs.
• Use only Propane (LPG) gas. An LPG tank is required and not included.

Assembly Instructions

Assembly is required for this patio heater. While it can be assembled by one person, two people may find the process easier due to the size and weight of components.

1. Unpack all components and verify against the parts list (not provided in this document, refer to product packaging for full list).
2. Assemble the base and secure the wheel assembly. The wheel assembly allows for easy mobility of the heater.


Figure 2: Close-up view of the patio heater's base, showing the integrated wheel assembly for convenient movement.

3. Attach the main support pole to the base.
4. Install the burner assembly and connect the gas hose. Ensure all connections are tight to prevent leaks.
5. Mount the reflector shield to the top of the burner assembly.
6. Place the LPG tank inside the base compartment and secure it using the provided chain.
7. Fill the waterbox (if applicable) in the base for added stability and weight.

Note: Consider the width of your door if assembling indoors, as the top reflector is wide and may require careful maneuvering.

Operating Instructions

Follow these steps to safely operate your patio heater:

1. Ensure the LPG tank valve is fully open.
2. Press and hold the control knob, then turn it to the "Pilot" position.
3. Press the Piezo igniter button repeatedly until the pilot flame ignites. You may hear a clicking sound.


Figure 3: Detail of the control panel, highlighting the control knob for heat adjustment and the Piezo igniter button for easy startup.

4. Once the pilot is lit, continue to hold the control knob for 10-15 seconds to allow the thermocouple to heat up.
5. Release the control knob. If the pilot flame extinguishes, repeat steps 2-4.
6. Once the pilot is stable, turn the control knob to the desired heat setting (Low to High). The heater will begin to radiate heat.


Figure 4: Illustrates key features including the 46,000 BTU heat output, the safety shut-off tilt valve, and the Piezo ignition system.

To turn off the heater, turn the control knob to the "OFF" position and close the valve on the LPG tank.

Maintenance

• Cleaning: Ensure the heater is completely cool before cleaning. Wipe exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or flammable solvents.
• Storage: When not in use, especially during off-season or inclement weather, disconnect the LPG tank and store the heater in a dry, protected area. Secure the heater to prevent tipping or damage.
• Inspection: Regularly inspect the gas hose and connections for any signs of wear, cuts, or leaks. Perform a leak test annually or after replacing the gas cylinder.
• Reflector: Keep the reflector free of debris to ensure optimal heat distribution.

Troubleshooting

Specifications

Figure 5: Diagram illustrating the approximate dimensions of the patio heater, including height and reflector width.

Warranty and Support

This Amazon Basics Commercial Outdoor Patio Heater is backed by an Amazon Basics 1-year limited warranty. For warranty claims, technical support, or service inquiries, please contact Amazon Basics customer service. Retain your proof of purchase for warranty validation.