vhbw VHBW4251574613844

vhbw Microwave Turntable Plate Instruction Manual

Model: VHBW4251574613844

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your vhbw replacement microwave turntable plate. This glass plate is designed to ensure even heating of food in compatible microwave ovens. Please read these instructions carefully before use to ensure optimal performance and safety.

2. Product Overview and Package Contents

The vhbw microwave turntable plate is a high-quality glass replacement part designed for specific LG microwave models. It facilitates the rotation of food during cooking, promoting uniform heating.

Top-down view of the vhbw glass microwave turntable plate

Image 2.1: Top-down view of the vhbw glass microwave turntable plate, showing its circular shape and textured surface.

Package Contents:

Note: The rotating ring, roller, or drive coupling are not included with this replacement plate. These components are typically part of your microwave oven and should be reused if functional.

3. Compatibility

This vhbw turntable plate is compatible with the following LG microwave models and replacement part numbers:

Before installation, verify that your microwave model is listed above and that the diameter of your original plate matches this replacement (24.5 cm).

4. Setup and Installation

Follow these steps to properly install the vhbw microwave turntable plate:

  1. Unpack the Plate: Carefully remove the new glass turntable plate from its packaging. Inspect it for any damage during transit.
  2. Ensure Microwave is Off: Before handling any internal components, ensure your microwave oven is unplugged from the power outlet for safety.
  3. Remove Old Plate (if applicable): If replacing an existing plate, carefully lift out the old turntable plate and the rotating ring assembly from the microwave cavity.
  4. Position the Rotating Ring: Place the rotating ring (the circular component with wheels) onto the central hub inside the microwave cavity. Ensure it sits flat and can rotate freely.
  5. Place the Turntable Plate: Carefully place the new vhbw glass turntable plate onto the rotating ring. The plate has a central groove and indentations on its underside that should align with the drive coupling (the central rotating element) and the wheels of the rotating ring.
Underside view of the vhbw glass microwave turntable plate, showing the central groove and indentations for the rotating mechanism.

Image 4.1: Underside view of the vhbw glass microwave turntable plate, highlighting the central groove and indentations designed to fit onto the microwave's rotating mechanism.

Ensure the plate is stable and rotates smoothly when gently turned by hand. Once installed, plug your microwave back into the power outlet.

5. Operating Instructions

The vhbw turntable plate operates as a standard microwave turntable. No special operating procedures are required beyond normal microwave use.

Caution: The glass plate will become hot during microwave operation. Always use oven mitts or allow the plate to cool before handling after cooking.

6. Maintenance and Cleaning

Regular cleaning of your turntable plate will help maintain hygiene and performance.

7. Troubleshooting

If you encounter issues with your turntable plate, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Plate does not rotate.
  • Plate not seated correctly on the rotating ring or drive coupling.
  • Rotating ring or drive coupling is dirty or damaged.
  • Microwave motor malfunction.
  • Re-seat the plate, ensuring it aligns with the rotating ring and drive coupling.
  • Clean the rotating ring and the area around the drive coupling. Inspect for damage.
  • If the motor is suspected, consult a qualified technician or your microwave's service manual.
Plate makes unusual noise during rotation.
  • Food debris under the rotating ring.
  • Rotating ring wheels are worn or damaged.
  • Plate is chipped or cracked.
  • Clean the microwave cavity and the rotating ring thoroughly.
  • Inspect the rotating ring for damage; replace if necessary.
  • Inspect the plate for damage; replace if necessary.
Food is not heating evenly.
  • Plate is not rotating.
  • Food quantity is too large for even heating.
  • Refer to "Plate does not rotate" troubleshooting steps.
  • Reduce food portion size or stir food halfway through cooking.

8. Specifications

FeatureDetail
Brandvhbw
Model NumberVHBW4251574613844
MaterialGlass
Diameter24.5 cm
Weight530 Grams
Package Dimensions26.5 x 26.3 x 2.2 cm
Compatible BrandsLG (specific models listed in Section 3)
Replacement Part Number6898790

9. Warranty and Support

vhbw products are manufactured to high-quality standards. For specific warranty information or support regarding this product, please refer to the retailer where the item was purchased or visit the official vhbw website. Keep your proof of purchase for any warranty claims.

Note: Information regarding the availability of spare parts for this specific item is currently unavailable.

Related Documents - VHBW4251574613844

Preview vhbw Lint Sieve Filter for Whirlpool Washing Machines - Model BW888401538
This document provides information and safety instructions for the vhbw Lint Sieve Filter, model BW888401538, a replacement part for Whirlpool washing machines compatible with part number 481248058403. It includes product specifications, safety guidelines, and disposal information.
Preview vhbw Activated Carbon Filter for Extractor Hoods - Model BW889002816
Detailed information about the vhbw Activated Carbon Filter (Model BW889002816), compatible with Ikea extractor hoods (e.g., models 903.046.29, 903.046.10). Includes product specifications, safety instructions, and disposal guidelines.
Preview vhbw Activated Carbon Filter for Extractor Hoods - Model BW889001897
Replacement activated carbon filter by vhbw for extractor hoods, model BW889001897. Features include dimensions 180x180x37 mm, weight 268g, and material activated carbon/plastic. Includes important safety and disposal information.
Preview vhbw Activated Carbon Filter for Extractor Hoods - Product Information and Safety Guidelines
Detailed product information and safety guidelines for the vhbw Activated Carbon Filter (Model BW889001897), designed for extractor hoods. Includes specifications, usage instructions, and disposal information.