UBay JX8061A

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

UBay Universal Remote Control Instruction Manual

Model: JX8061A

1. Introduction

This manual provides instructions for the UBay Universal Remote Control, model JX8061A. This remote is designed to operate various Element brand televisions, offering a direct replacement experience without complex programming.

Compatible Element TV Models include:

  • ELDFT501J, ELDFQ501J, ELEFW503, ELEFW605
  • ELDFW406, ELCFT262, ELDFW322, ELCFW326, ELCFW329
  • ELDFT404, ELCFW328, ELDFW464, ELDFT465J, ELEFQ501J
  • ELGFW601, ELDFW501, ELEFW193, ELEFJ191, ELEFT195
  • ELEFW195, ELEFS191, ELEFT193, ELEFJ243, ELEFS241
  • ELEFW264, ELEFT281, ELEFW325, ELEFT326, ELEFS321
  • ELEFJ321, ELEFT406, ELEFQ402, ELEFW401A
  • ELEFQ462, ELEFT466, ELEFW462, ELEFC461, ELEFC463JA
  • ELEFT502, ELEFW705, ELEFQ391J, ELDFT395J, ELEFJ391
  • ELEFC401, ELDFC551J, ELEFC461, ELDFT465J, ELEFQ402
  • ELEFW705, ELDFW407, ELEFW5016

2. Setup

2.1 Battery Installation

The UBay Universal Remote Control requires two AAA batteries (not included) for operation.

  1. Locate the battery compartment cover on the back of the remote control.
  2. Slide the cover downwards or press the latch and lift to open.
  3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
  4. Replace the battery compartment cover by sliding it back into place until it clicks securely.

Note: Ensure batteries are inserted correctly. Incorrect polarity can prevent the remote from functioning.

2.2 Initial Use

This remote control is pre-programmed for compatible Element TVs. No additional programming or setup is required. Once batteries are installed, the remote is ready for use.

3. Operating Instructions

Below is an overview of the remote control's buttons and their primary functions.

UBay Universal Remote Control for Element TVs

Image 1: Front view of the UBay Universal Remote Control, model JX8061A. It features a black casing with white and red buttons. Key buttons include Power (red), Mute (green), number pad, Channel Up/Down, Volume Up/Down, Menu, OK, and directional navigation.

Remote Control Button Functions
ButtonFunction
Power (Red)Turns the television on or off.
Mute (Green)Mutes or unmutes the television audio.
0-9 (Number Pad)Direct channel selection.
SOURCESelects input sources (e.g., HDMI, AV).
CH +/-Changes television channels up or down.
VOL +/-Adjusts television volume up or down.
MENUAccesses the television's main menu.
OKConfirms selections within menus.
Directional ArrowsNavigates through menus and options.
EXITExits the current menu or on-screen display.
P.MODECycles through picture modes.
S.MODECycles through sound modes.
MTSSelects Multi-channel Television Sound options.
SLEEPSets the sleep timer for the television.
INFODisplays current channel information or program details.
FREEZEPauses the current image on screen.
CH.LISTDisplays the channel list.
AUTOInitiates auto-tuning or auto-scan for channels.
ASPECTChanges the screen aspect ratio.
CCActivates or deactivates Closed Captions.
V-CHIPAccesses V-Chip parental control settings.
FAVAccesses favorite channels list.
ADD/ERASEAdds or erases items from lists (e.g., favorite channels).

4. Maintenance

4.1 Cleaning

To clean the remote control, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the remote's surface or internal components.

4.2 Battery Replacement

Replace batteries when the remote control's response becomes inconsistent or stops working. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries, or different types of batteries.

4.3 Storage

If the remote control will not be used for an extended period, remove the batteries to prevent leakage, which can cause damage to the device.

5. Troubleshooting

Common Issues and Solutions
ProblemSolution
Remote is not working.
  • Check if the batteries are inserted correctly with the correct polarity.
  • Replace old batteries with new AAA batteries.
  • Ensure there are no obstructions between the remote and the TV's infrared sensor.
  • Confirm the remote is pointed directly at the TV.
Remote works intermittently.
  • Batteries may be low; replace them.
  • Ensure a clear line of sight to the TV.
Some buttons do not respond.
  • This remote is designed for specific Element TV models. Verify your TV model is listed as compatible.
  • Clean the remote control surface, especially around the unresponsive buttons, to remove any debris.

6. Specifications

  • Model: JX8061A
  • Brand: UBay
  • Compatible Devices: Element Televisions (specific models listed in Introduction)
  • Power Source: 2 x AAA Batteries (not included)
  • Dimensions: 6 x 1.8 x 0.5 inches (approximately)
  • Weight: 1.58 ounces (without batteries)
  • Color: Black
  • Special Feature: Universal (for specified Element TV models)

7. Warranty Information

Please refer to the retailer or manufacturer's website for specific warranty details regarding this product. Warranty terms typically cover manufacturing defects and may vary by region and purchase date.

8. Customer Support

For further assistance or inquiries, please contact your product retailer or visit the UBay official support channels. Keep your purchase receipt and product model number (JX8061A) available when seeking support.

© 2025 UBay. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.