Defiant 180° Bronze Motion Activated Outdoor Integrated LED Twin Head Flood Light

1. Product Overview

The Defiant Twin Head Adjustable Color Temperature LED motion security light is designed to provide robust outdoor illumination and enhanced security. It features a powerful 2350 lumen output and a 180° motion detection range of up to 70 feet. A key feature is the adjustable color temperature, allowing users to select between Warm White (3,000K) and Daylight (5,000K) to match existing outdoor lighting or personal preference. The DualBrite technology provides accent lighting from dusk-to-dawn and full brightness upon motion detection, optimizing energy use.

Figure 1: Front view of the Defiant 180° Bronze Motion Activated Outdoor Integrated LED Twin Head Flood Light. This image shows the two adjustable LED lamp heads and the motion sensor located below them.

2. Safety Information

Please read and understand all instructions before attempting to assemble, operate, or install the product. Failure to do so could lead to electric shock, fire, or other injuries.

• Always disconnect power at the circuit breaker or fuse box before installation or servicing.
• This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
• Use only UL-listed wire connectors.
• Do not attempt to alter or modify this product in any way.
• Ensure all connections are secure and properly insulated.
• Operating temperature range: -25°C (-13°F) to +50°C (+120°F). Do not operate outside this range.

3. Package Contents

Verify that all components listed below are included in your package:

• Defiant LED Twin Head Flood Light Unit
• Mounting Hardware (screws, wire nuts, mounting plate)
• Remote Control (if applicable, for certain models)
• Instruction Manual (this document)

4. Setup and Installation

This flood light is designed for DIY-friendly installation with three easy steps. It can be mounted on a wall or under an eave.

1. Prepare the Mounting Surface: Ensure the electrical box is securely mounted and the power is turned off at the circuit breaker.
2. Mount the Fixture: Attach the mounting plate to the electrical box. Connect the fixture's wires to your household wiring (black to black, white to white, ground to ground) using the provided wire nuts. Secure the fixture to the mounting plate.
3. Adjust Lamp Heads and Sensor: The lamp heads and motion sensor can be adjusted without tools to direct light and detection coverage as needed.

Figure 2: Top-down view of the flood light, illustrating the adjustable lamp heads and the compact design suitable for various mounting orientations.

For optimal motion detection, mount the fixture at a height of 6-10 feet (1.8-3 meters) above the ground.

5. Operating Instructions

The Defiant flood light offers advanced features for customizable lighting.

Motion Detection

The integrated motion sensor provides a 180° detection angle with a range of up to 70 feet. The light will activate to full brightness when motion is detected within this zone.

DualBrite Technology

This feature provides two levels of illumination:

• Accent Light: From dusk-to-dawn, the light will emit a low-level accent light (pre-set at 3,000K Warm White) to provide subtle illumination and enhance security.
• Full Brightness: When motion is detected, the light will switch to full 2350 lumen brightness for a set duration, then return to accent light mode.

Adjustable Color Temperature (ACT)

The Adjustable Color Temperature feature allows you to select your preferred light color. A simple dial control is located on the bottom of the motion sensor. Rotate the dial to choose between:

• Warm White (3,000K): A softer, more traditional light color.
• Daylight (5,000K): A brighter, cooler light color, similar to natural daylight.

Figure 3: The product highlighting its weather-resistant design and integrated LED technology, ensuring durability and energy efficiency for outdoor use.

6. Maintenance

The Defiant LED Twin Head Flood Light is designed for minimal maintenance. To ensure optimal performance and longevity:

• Cleaning: Periodically wipe the fixture with a soft, damp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
• Inspection: Annually inspect the wiring and mounting hardware for any signs of wear, damage, or loosening. Ensure the motion sensor lens is clear of obstructions.
• LEDs: The integrated LEDs are designed for long life and do not require replacement.

7. Troubleshooting

If you experience issues with your flood light, refer to the following common problems and solutions:

8. Specifications

Detailed technical specifications for the Defiant 180° Bronze Motion Activated Outdoor Integrated LED Twin Head Flood Light:

• Model Number: 016963259973
• Light Output: 2350 Lumens
• Motion Detection: 180° with up to 70 ft. range
• Adjustable Color Temperature (CCT): 3,000K (Warm White) to 5,000K (Daylight)
• Operating Temperature Range: -25°C (-13°F) to +50°C (+120°F)
• Dimensions (Product): 9.54 in. (Depth) x 6.36 in. (Height) x 7.13 in. (Width)
• Brand: Defiant
• Color: Bronze
• Material: Bronze
• Style: Modern
• Light Fixture Form: Floodlight

Figure 4: Official Lighting Facts label, providing detailed photometric data including lumen output, wattage, efficacy, color accuracy (CRI), and correlated color temperature (CCT) range.

9. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product at the time of purchase. You may also visit the official Defiant website or contact their customer service department directly for assistance with product inquiries, troubleshooting, or warranty claims.

Please have your model number (016963259973) and date of purchase available when contacting support.