1. Introduction
This manual provides detailed instructions for the installation, setup, and operation of your MOES WiFi Smart Wall Light Switch (1 Gang, White). Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image 1: MOES WiFi Smart Wall Light Switch (1 Gang, White) - Front view of the sleek glass touch panel.
2. Important Safety Information
- Electrical Hazard: Installation must be performed by a qualified electrician in accordance with all local electrical codes.
- Neutral Wire Required: This smart switch requires a neutral wire in your switch box to operate correctly.
- 2.4GHz Wi-Fi Only: Requires a 2.4GHz Wi-Fi network connection. Not compatible with 5GHz Wi-Fi networks.
- Single Gang Compatibility: Only compatible with 1 gang switch boxes. Not compatible with standard US 2/3/4 gang switch plates.
- Not for 3-Way or Dimmer Use: This switch is not designed for 3-way switch configurations or as a dimmer switch.
- Disconnect power at the circuit breaker before installation.
- Do not exceed the maximum load rating of 1000 watts.
Image 2: Important compatibility and safety notes, highlighting the 2.4GHz Wi-Fi, neutral wire requirement, and non-compatibility with 3-way or dimmer setups.
3. Package Contents
Please verify that all components are present:
- MOES WiFi Smart Wall Light Switch (1 Gang, White)
- User Manual
- Mounting Screws
4. Product Specifications
| Feature | Specification |
|---|---|
| Brand | MOES |
| Model Number | 43237-2 |
| Operation Mode | Automatically, Off, Smart Switch |
| Current Rating | 10 Amps |
| Operating Voltage | 240 Volts |
| Contact Type | Single Pole |
| Connector Type | Wireless |
| Terminal | Screw |
| Dimensions (L x W x H) | 4.72 x 3 x 1.45 inches |
| Circuit Type | 1-way |
| Actuator Type | Push Button |
| Contact Material | Metal |
| International Protection Rating | IPX4 |
| Controller Type | Amazon Alexa, Google Assistant |
| Control Method | Remote |
| Connectivity Protocol | Wi-Fi |
| Color | White |
| Wattage | 1000 watts |
Image 3: Detailed dimensions and back panel view of the MOES Smart Wall Light Switch, showing wiring terminals.
5. Installation Guide
- Turn Off Power: Before starting any electrical work, ensure the power is completely off at the circuit breaker for the relevant circuit.
- Remove Old Switch: Carefully remove your existing wall switch from the wall box.
- Identify Wires: Identify the Live (L), Neutral (N), and Load (L1, L2, L3) wires. A neutral wire is required for this smart switch. If you do not have a neutral wire, consult a qualified electrician.
- Wire the Smart Switch: Connect the wires to the corresponding terminals on the MOES Smart Wall Light Switch as shown in the diagram below.
- Connect the Live wire to the 'L' terminal.
- Connect the Neutral wire to the 'N' terminal.
- Connect the Load wire(s) to the 'L1' terminal (for 1-gang switch).
- Mount the Switch: Secure the smart switch into the wall box using the provided screws. Ensure wires are not pinched.
- Attach Faceplate: Snap the glass touch panel faceplate onto the switch.
- Restore Power: Turn the power back on at the circuit breaker.
Image 4: Wiring diagram illustrating connections for 1-gang, 2-gang, and 3-gang smart switches. For this 1-gang model, refer to the leftmost diagram.
Image 5: Visual comparison showing the replacement of a traditional keystroke switch with an intelligent touch switch.
6. App Setup and Wi-Fi Connection
- Download App: Download the "Smart Life" app from the App Store (iOS) or Google Play Store (Android).
- Register/Login: Register for a new account or log in with an existing one.
- Add Device (Easy Mode):
- Open the Smart Life app and tap the '+' icon in the top right corner to add a device.
- Select "Wall Switch" from the device type list.
- Ensure the indicator light on the switch is rapidly blinking (two times per second). If not, reset the device (see "Resetting the Device" below).
- Confirm the indicator light is rapidly blinking in the app.
- Enter your 2.4GHz Wi-Fi network password. Ensure your phone and the switch are close to your Wi-Fi router.
- The app will begin connecting to the device. Once successful, you can rename the switch.
- Resetting the Device:
- To reset the switch to "Default Normal Mode" (fast blinking for Easy Mode connection), press and hold any button on the switch for approximately 20 seconds until the indicator light blinks quickly.
- To enter "AP Mode" (slow blinking for AP Mode connection, if Easy Mode fails), press and hold any button for more than 20 seconds until the indicator light blinks very slowly.
Video 1: Instructions on how to reset or unlock the device, demonstrating the fast and slow blinking modes for Wi-Fi connection.
7. Operating Instructions
7.1. Manual Control
The glass touch panel allows for direct control. Simply tap the illuminated area on the switch to turn the connected light or appliance ON or OFF.
7.2. Remote Control via Smart Life App
Once connected to the Smart Life app, you can control your switch from anywhere using your smartphone, provided you have an internet connection (Wi-Fi or 4G).
- Open the Smart Life app.
- Select your MOES Smart Wall Light Switch from the device list.
- Tap the ON/OFF icon to control the light.
Image 6: A smartphone displaying the Smart Life app interface, showing remote control functionality for the smart switch.
7.3. Voice Control (Alexa & Google Assistant)
Integrate your MOES Smart Wall Light Switch with Amazon Alexa or Google Assistant for convenient voice control.
- Link Smart Life Account: In your Alexa or Google Home app, navigate to the "Skills" or "Works with Google" section. Search for "Smart Life" and enable the skill/service. Link your Smart Life account using your app credentials.
- Discover Devices: Once linked, ask your voice assistant to "Discover devices" or manually initiate device discovery in the app.
- Voice Commands: You can now use voice commands such as:
- "Alexa, turn on [Device Name]"
- "Hey Google, turn off [Device Name]"
- "Alexa, set [Device Name] to 50%" (Note: This switch is not a dimmer, so percentage commands may not function as expected for brightness control but might be interpreted as ON/OFF by some systems).
Image 7: The MOES Smart Switch positioned between an Amazon Echo and Google Home device, illustrating voice control capabilities.
7.4. Timing Function and Schedules
Utilize the Smart Life app to set schedules and timers for automated control of your lights.
- In the Smart Life app, select your switch.
- Access the "Schedule" or "Timer" function.
- Set specific times for the light to turn ON or OFF daily, weekly, or based on sunrise/sunset.
Image 8: A smartphone screen showing the scheduling interface within the Smart Life app, with options to set ON/OFF times for the smart switch.
8. Maintenance
- Cleaning: The toughened glass surface is designed to resist scratches. Clean with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Firmware Updates: Periodically check the Smart Life app for available firmware updates to ensure optimal performance and security.
- Environmental Conditions: Ensure the switch is not exposed to excessive moisture or extreme temperatures beyond its operating range.
9. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Switch not responding to touch. | Check power supply. Ensure the switch is properly installed and receiving power. If recently installed, ensure the glass plate was attached with power off. |
| Cannot connect to Wi-Fi. |
|
| Voice control not working. |
|
| Scheduled events not triggering. |
|
10. Warranty and Support
MOES products are designed for reliability and performance. For warranty information, technical support, or assistance with your MOES WiFi Smart Wall Light Switch, please contact MOES customer service through their official website or the contact information provided with your purchase. Please have your model number (43237-2) and purchase details ready.
For additional resources and product information, visit the official MOES Store: MOES Store on Amazon
