1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Good Earth Lighting Three-Head LED Security Flood Light, Model SE1163-WH3-00LF0-G. This fixture is designed to provide bright, energy-efficient illumination for outdoor areas such as backyards, driveways, and building perimeters. Please read these instructions thoroughly before installation and retain them for future reference.
2. Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Grounding is required for safe operation.
- Do not handle live wires with wet hands.
- Ensure all connections are secure and properly insulated.
- This fixture is rated for 120V AC power supply.
- Do not attempt to disassemble or modify the integrated LED components. There are no user-serviceable parts inside.
3. Package Contents
Verify that all components are present before beginning installation:
- Three-Head LED Security Flood Light Fixture
- Universal Mounting Plate
- Mounting Hardware (screws, wire nuts)
- Instruction Manual
4. Installation Instructions
4.1 Pre-Installation
- Turn off power: Locate the circuit breaker or fuse box controlling the outdoor lighting circuit and turn off the power. Verify power is off using a voltage tester.
- Prepare mounting surface: This fixture is designed for direct wire installation and can be mounted on a wall, eave, or surface box. Ensure the mounting surface is structurally sound and can support the fixture's weight.
4.2 Mounting the Fixture
- Attach the universal mounting plate to the junction box using the provided screws. Ensure the plate is securely fastened.
- Feed the electrical wires from the junction box through the center hole of the mounting plate and into the fixture's wiring compartment.
Figure 1: Front view of the Good Earth Lighting Three-Head LED Security Flood Light.
4.3 Wiring Connections
- Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the green or bare copper (ground) wire from the fixture to the green or bare copper (ground) wire from the junction box using a wire nut.
- Carefully tuck all wires into the junction box and align the fixture with the mounting plate. Secure the fixture to the mounting plate using the provided screws.
4.4 Adjusting Light Heads
The three LED light heads feature swivel joints, allowing for independent adjustment. Loosen the adjustment screws on each head, position the light beam to the desired area, and then securely tighten the screws to lock the position.
Figure 2: Good Earth Lighting flood light installed on an exterior wall, illuminating the area.
5. Operation
Once installed and power is restored, the Good Earth Lighting Three-Head LED Security Flood Light operates via a standard wall switch. Flip the switch to the "ON" position to activate the light and to the "OFF" position to deactivate it.
The adjustable heads allow you to direct the light precisely where needed, providing broad coverage for enhanced visibility and security.
6. Maintenance
- Cleaning: To clean the fixture, ensure power is off. Use a soft, damp cloth to wipe down the exterior. Do not use abrasive cleaners or solvents, as these may damage the finish or polycarbonate diffuser.
- LEDs: This fixture features integrated LED lamps with an estimated life of 50,000 hours. The LEDs are not replaceable. If the LEDs cease to function, the entire fixture should be replaced.
- Inspection: Periodically inspect the fixture for any signs of damage, loose wiring, or corrosion. Address any issues promptly to ensure safe and proper operation.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wiring connection. Faulty wall switch. | Check circuit breaker/fuse. Verify all wire connections are secure (ensure power is off first). Test or replace the wall switch. |
| Light flickers. | Loose wiring connection. Incompatible dimmer switch (this fixture is not designed for dimming). | Check all wire connections (ensure power is off first). Ensure a standard ON/OFF switch is used. |
| Insufficient illumination. | Light heads are not aimed correctly. | Adjust the swivel joints of the light heads to direct light to the desired areas. |
If troubleshooting steps do not resolve the issue, contact customer support.
8. Specifications
- Model: SE1163-WH3-00LF0-G
- Power Source: AC/DC
- Voltage: 120 Volts
- Wattage: 34 Watts (LED)
- Brightness: 3317 Lumens
- Light Color: Day White (approx. 5164 Kelvin)
- Light Source Type: Integrated LED
- Number of Light Sources: 3
- Lamp Life: 50,000 Hours (estimated)
- Material: Die-cast Aluminum Housing, Polycarbonate Diffuser
- Finish: Textured White
- Dimensions: 12.25" L x 9.00" W x 5.75" H
- Item Weight: 2.17 lbs
- Installation Type: Direct Wire, Surface Mounted, Wall Mounted
- Indoor/Outdoor Usage: Outdoor
- Special Features: Shatter Resistant Diffuser, Adjustable Heads
- Certifications: ETL Listed, Energy Star Certified
- UPC: 755284017908
9. Warranty and Support
This Good Earth Lighting product is backed by a 6-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or further inquiries, please contact Good Earth Lighting customer support. Refer to the product packaging or the official Good Earth Lighting website for current contact information.
Note: Keep your purchase receipt as proof of purchase for warranty purposes.
