Haswing PROTRUAR 1.0 65 LBS Electric Motor User Manual

1. Product Overview

The Haswing PROTRUAR 1.0 electric motor is a powerful and reliable outboard motor designed for various aquatic activities. Weighing only 6.5 kg and offering 65 pounds of thrust, it is ideal for boat propulsion, fishing, and leisure activities in fresh water. This 12-volt DC electric motor is constructed from robust metal for optimal durability, mounts easily to your boat's transom, and provides quiet, environmentally friendly operation.

• Electric Power: Enjoy silent and environmentally friendly propulsion with this 1.0 HP electric motor.
• Lightweight: Easy to transport and install with a weight of only 6.5 kg.
• Transom Mount: Compatible with a wide range of boats thanks to its universal mounting system.
• Robust Design: Made of metal for extreme durability.
• Multiple Uses: Perfect for water sports, fishing, boat propulsion, and leisure activities.

Figure 1: Full view of the Haswing PROTRUAR 1.0 electric motor, showing the propeller, shaft, mounting bracket, and control head.

2. Safety Instructions

Always read and understand all instructions before operating the motor. Failure to follow safety precautions can result in serious injury or damage.

• General Safety:
  • Ensure all users are familiar with the motor's operation and safety features.
  • Do not operate the motor if you are under the influence of alcohol or drugs.
  • Always wear a personal flotation device (PFD) when on the water.
• Installation Safety:
  • Ensure the motor is securely mounted to the transom before use.
  • Verify all electrical connections are tight and properly insulated to prevent short circuits.
• Battery Safety:
  • Use only 12-volt deep cycle marine batteries.
  • Connect the battery correctly (positive to positive, negative to negative) to avoid damage to the motor or battery.
  • Keep battery terminals clean and free of corrosion.
• Propeller Safety:
  • Never touch the propeller when the motor is connected to a power source.
  • Ensure the area around the propeller is clear of obstructions and people before operating.

3. Package Contents

Please check the package contents carefully upon unpacking. If any items are missing or damaged, contact your retailer immediately.

• Haswing PROTRUAR 1.0 Electric Motor Unit
• Mounting Hardware (e.g., transom clamp, bolts)
• Propeller and Propeller Nut
• User Manual

4. Setup

4.1 Mounting the Motor

1. Select a suitable mounting location on the boat's transom. Ensure the transom is strong enough to support the motor.
2. Loosen the transom clamp screws on the motor bracket.
3. Position the motor on the transom, ensuring the shaft is vertical and the propeller is submerged to the correct depth when in water.
4. Tighten the transom clamp screws securely by hand. Do not overtighten.
5. For added security, use the provided bolts (if applicable) to permanently attach the bracket to the transom.

4.2 Connecting the Battery

1. Ensure the motor is turned OFF before connecting the battery.
2. Connect the red (positive) cable from the motor to the positive (+) terminal of your 12-volt deep cycle marine battery.
3. Connect the black (negative) cable from the motor to the negative (-) terminal of your battery.
4. Ensure all connections are clean, tight, and free of corrosion.

Figure 2: Close-up view of the Haswing PROTRUAR 1.0 motor's control head and mounting bracket, illustrating the adjustable handle and transom clamp.

5. Operating Instructions

5.1 Starting and Stopping

• Ensure the propeller is fully submerged before starting the motor.
• To start, rotate the throttle handle to the desired speed setting. The motor will begin to operate.
• To stop, rotate the throttle handle back to the "OFF" or "0" position.

5.2 Speed Control

The PROTRUAR 1.0 features variable speed control. Rotate the throttle handle clockwise for forward speeds and counter-clockwise for reverse speeds. The further you rotate, the higher the speed.

5.3 Steering

Steer the boat by rotating the motor's control head left or right. The motor can be rotated 360 degrees for full maneuverability.

6. Maintenance

Regular maintenance will ensure the longevity and optimal performance of your Haswing PROTRUAR 1.0 electric motor.

• After Each Use:
  • Rinse the motor, especially the propeller and shaft, with fresh water to remove salt, dirt, or debris.
  • Wipe down the motor with a clean, dry cloth.
  • Disconnect the battery when the motor is not in use.
• Propeller Inspection:
  • Periodically check the propeller for weeds, fishing line, or damage. Remove any obstructions.
  • If the propeller is chipped or bent, replace it to maintain efficiency and prevent vibration.
• Battery Care:
  • Keep battery terminals clean and apply a thin layer of dielectric grease to prevent corrosion.
  • Charge your battery fully after each use and before long-term storage.
• Storage:
  • Store the motor in a dry, cool place, away from direct sunlight and extreme temperatures.
  • Ensure the motor is clean and dry before storing.

7. Troubleshooting

This section provides solutions to common issues you might encounter with your Haswing PROTRUAR 1.0 electric motor.

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the official Haswing website or contact your authorized retailer. Keep your purchase receipt as proof of purchase for any warranty claims.

Note: Warranty terms and conditions may vary by region and retailer.