1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the MOXA EDS-P506E-4PoE-2GTXSFP Managed Ethernet PoE Switch. This industrial-grade switch is designed for reliable network connectivity in demanding environments, offering Power over Ethernet (PoE+) capabilities and advanced management features.
2. Safety Information
- Ensure proper grounding of the device to prevent electrical hazards.
- Operate the switch within the specified temperature range of -10 to 60°C.
- Use only the specified power input (12/24/48VDC) to avoid damage.
- Do not open the device casing; refer servicing to qualified personnel.
- Protect the device from moisture and extreme environmental conditions.
3. Package Contents
Verify that your package contains the following items:
- MOXA EDS-P506E-4PoE-2GTXSFP Managed Ethernet PoE Switch
- Quick Installation Guide
- Documentation CD (or link to online resources)
- Mounting Kit (e.g., DIN-rail kit)
If any items are missing or damaged, please contact your vendor immediately.
4. Product Overview
The MOXA EDS-P506E-4PoE-2GTXSFP is a robust industrial Ethernet switch featuring 4 PoE+ 10/100BaseTX ports and 2 combo 10/100/1000BaseTX or 100/1000BaseSFP ports. It is designed for applications requiring high reliability and Power over Ethernet capabilities.
Figure 1: Front view of the MOXA EDS-P506E-4PoE-2GTXSFP Managed Ethernet PoE Switch, showing the 4 PoE+ ports, 2 combo ports, and LED indicators.
4.1 Port Description
- PoE+ Ports (1-4): 10/100BaseTX ports supporting IEEE 802.3at/af Power over Ethernet, delivering up to 30W per port, with a total power budget of 60W.
- Combo Ports (5-6): Two flexible ports that can operate as either 10/100/1000BaseTX (RJ45) or 100/1000BaseSFP (fiber) ports. Only one interface (RJ45 or SFP) can be active at a time for each combo port.
4.2 LED Indicators
Refer to the device's front panel for LED indicators. These typically include:
- PWR1/PWR2: Power input status.
- FAULT: System fault indicator.
- MSTR/CPLR: Redundancy status (if applicable).
- PoE Status: Indicates PoE power delivery status for each PoE port.
- Link/Act: Network link and activity status for each port.
5. Setup
5.1 Mounting the Switch
The EDS-P506E-4PoE-2GTXSFP supports PoE Mount. Typically, this involves DIN-rail mounting for industrial environments.
- Attach the DIN-rail mounting kit to the rear of the switch using the provided screws.
- Hook the top of the DIN-rail clip over the top edge of the DIN-rail.
- Push the switch firmly against the DIN-rail until it snaps into place.
- Ensure the switch is securely fastened to prevent accidental dislodgement.
5.2 Power Connection
The switch supports dual 12/24/48VDC power inputs for redundancy.
- Connect the positive (+) wire from your DC power supply to the V+ terminal on the terminal block.
- Connect the negative (-) wire from your DC power supply to the V- terminal on the terminal block.
- Connect the ground wire to the ground terminal.
- Repeat for the second power input if redundancy is desired.
- Ensure all connections are secure before applying power.
5.3 Network Connections
Connect network devices to the switch ports.
- PoE+ Ports: Connect PoE-powered devices (PDs) such as IP cameras, wireless access points, or VoIP phones to ports 1-4 using standard Ethernet cables. These ports will automatically detect and provide power to compliant devices.
- Combo Ports: For ports 5 and 6, choose either the RJ45 copper interface or the SFP fiber interface.
- For copper, connect standard Ethernet cables to the RJ45 ports.
- For fiber, insert compatible SFP transceivers into the SFP slots and connect fiber optic cables.
6. Operating the Switch
6.1 Initial Power-Up
Once power is connected, the switch will begin its boot-up sequence. Observe the PWR LEDs to ensure stable power. The Link/Act LEDs will illuminate when a network device is connected and active.
6.2 Managed Features
As a managed switch, the EDS-P506E-4PoE-2GTXSFP offers advanced configuration and monitoring capabilities. Access these features via a web-based interface, Telnet, or SNMP. Refer to the detailed software manual (available on the Moxa website) for specific instructions on:
- IP address configuration
- VLAN setup
- QoS (Quality of Service) settings
- Port mirroring
- Redundancy protocols (e.g., Turbo Ring, RSTP)
- PoE management and scheduling
7. Maintenance
7.1 Cleaning
Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure the device is powered off before cleaning.
7.2 Firmware Updates
Moxa may release firmware updates to improve performance, add features, or address security vulnerabilities. Regularly check the official Moxa website for the latest firmware versions for your model. Follow the provided instructions carefully when performing firmware updates to avoid damaging the device.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power (PWR LED off) | No power input; faulty power supply; incorrect wiring. | Check power connections and power supply. Ensure correct voltage (12/24/48VDC) and polarity. |
| No link on a port (Link/Act LED off) | Faulty cable; incorrect device connection; device powered off. | Verify cable integrity. Ensure the connected device is powered on and functioning. Check port configuration in the management interface. |
| PoE device not receiving power | Device not PoE compliant; cable issue; PoE budget exceeded. | Ensure the device is IEEE 802.3at/af compliant. Check cable length and quality. Verify the total PoE power budget (60W) is not exceeded. Check PoE settings in the management interface. |
| Cannot access management interface | Incorrect IP address; network connectivity issue; firewall blocking access. | Verify the switch's IP address and your computer's network settings. Ensure there are no firewall rules blocking access. Try a direct connection if possible. |
9. Specifications
| Feature | Detail |
|---|---|
| Model | EDS-P506E-4PoE-2GTXSFP |
| Brand | Moxa |
| Ethernet Ports | 4 x 10/100BaseTX (PoE+), 2 x Combo 10/100/1000BaseTX or 100/1000BaseSFP |
| PoE Standard | IEEE 802.3at/af (PoE+) |
| Total PoE Power Budget | 60W |
| Operating Voltage | Dual 12/24/48VDC |
| Operating Temperature | -10 to 60°C |
| Mounting Type | PoE Mount (typically DIN-rail) |
| International Protection Rating | IP54, IP67 |
| Item Weight | 14.99 Pounds |
| UPC | 747356312066 |
10. Warranty and Support
Moxa products typically come with a standard warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Moxa website. For technical support, product documentation, and software downloads, please visit the Moxa support portal or contact your local Moxa representative.
Moxa Official Website: www.moxa.com
