Hyper Tough Touch-Sensitive COB LED Headlight

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Hyper Tough Touch-Sensitive COB LED Headlight Instruction Manual

Model: Touch-Sensitive COB LED Headlight

Introduction

Thank you for purchasing the Hyper Tough Touch-Sensitive COB LED Headlight. This manual provides important information regarding the safe operation, maintenance, and troubleshooting of your new headlight. Please read this manual thoroughly before use and retain it for future reference.

Safety Information

Always observe the following safety precautions to prevent injury or damage to the product.

WARNING: Do not shine the LED light directly into eyes. This can cause temporary vision impairment or permanent eye damage.
CAUTION: Keep batteries away from children. If a battery is swallowed, seek medical advice at once.
Check battery for correct polarity (+/-) before insertion.
Do not disassemble, recharge, or dispose of batteries in fire.
Do not mix used and new batteries, or batteries of different brands or types.
This product is designed for use with non-rechargeable batteries. Do not use rechargeable batteries.
WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Close-up view of the back of the Hyper Tough headlight showing a warning label.

Image: Close-up of the headlight's rear, displaying a warning label regarding eye safety.

Package Contents

Verify that all items are present in the package:

Hyper Tough Touch-Sensitive COB LED Headlight
3 x AAA Batteries (included)

Front view of the Hyper Tough Touch-Sensitive COB LED Headlight in its retail packaging.

Image: The headlight as packaged for retail, showing the product and included batteries.

Product Overview

The Hyper Tough Touch-Sensitive COB LED Headlight is a versatile and durable lighting solution designed for various tasks and activities. It features a COB LED for bright illumination and a touch-sensitive switch for easy operation.

Durable Construction: Made from tough plastic material for long-lasting use.
Versatile Lighting: LED lights provide bright illumination for tasks and activities.
Portable Design: Compact size and lightweight build for easy transport.
Easy Battery Access: Convenient battery compartment allows quick charging and replacement.
Water Resistant: IP65 rating protects against dust and water splashes.

Hyper Tough Touch-Sensitive COB LED Headlight with adjustable black strap.

Image: The Hyper Tough headlight, showing its main body and adjustable head strap.

Setup

Battery Installation

Locate the battery compartment on the back of the headlight unit.
Open the battery compartment cover.
Insert 3 AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
Close the battery compartment cover securely.

Adjusting the Head Strap

The elastic head strap is adjustable to fit various head sizes. Slide the buckles on the strap to lengthen or shorten it for a comfortable and secure fit.

Operation

Power On/Off and Mode Selection

The headlight features a touch-sensitive switch for easy control.

To turn the headlight ON, press the power button once. The light will activate in High mode.
To cycle through light modes, press the power button repeatedly:
- First press: High Mode (100 Lumens)
- Second press: Low Mode (45 Lumens)
- Third press: Red Strobe Mode
To turn the headlight OFF, press the power button after cycling through all modes, or hold the power button for approximately 2 seconds from any mode.

Hyper Tough headlight illuminating a surface with its bright LED light.

Image: The Hyper Tough headlight in operation, casting a bright beam of light.

Maintenance

Clean the headlight with a soft, damp cloth. Do not use abrasive cleaners or solvents.
If the headlight will not be used for an extended period, remove the batteries to prevent leakage and corrosion.
Store the headlight in a cool, dry place away from direct sunlight.
Ensure the battery compartment is always sealed to maintain water resistance.

Troubleshooting

Problem	Possible Cause	Solution
Headlight does not turn on.	Batteries are dead or low. Batteries are inserted incorrectly. Battery compartment is not closed securely.	Replace with new AAA batteries. Check and correct battery polarity. Ensure battery compartment cover is fully latched.
Light is dim.	Batteries are low.	Replace with new AAA batteries.
Headlight flickers.	Loose battery connection or low batteries.	Check battery insertion; replace batteries if necessary.

Specifications

Brand	Hyper Tough
Model	Touch-Sensitive COB LED Headlight
Light Source Type	COB LED
Power Source	3 x AAA Batteries (Non-rechargeable)
Material	Plastic
Color	Red / Black
Water Resistance Level	IP65 (Water Resistant)
Light Modes	High, Low, Red Strobe
High Mode Output	100 Lumens (Approx. 4 hours runtime)
Low Mode Output	45 Lumens (Approx. 10 hours runtime)
UPC	889526107055

Image: Rear of the product packaging, detailing technical specifications and safety warnings.

Warranty and Support

For warranty information or product support, please refer to the contact details provided on the product packaging or visit the official Hyper Tough website. Keep your purchase receipt as proof of purchase.

Manufacturer: Hyper Tough

Distributed by: Wal-Mart Stores, Inc.

Website: Walmart.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.