LIBO Smart Home V70C+L

LIBO 7-inch Waterproof Wired Video Doorbell Intercom System

Model: V70C+L

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your LIBO 7-inch Waterproof Wired Video Doorbell Intercom System. This system includes a 7-inch indoor monitor and an outdoor camera, allowing you to see and communicate with visitors before opening your door. It enhances home security by providing visual and audio verification of visitors.

Safety Information

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

Ensure power is disconnected before any installation or wiring work.
Do not expose the indoor monitor to water or high humidity. The outdoor unit is waterproof, but avoid direct high-pressure water jets.
Use only the provided power adapter and cables.
Do not attempt to disassemble or repair the unit yourself. Contact qualified personnel for service.
Keep the product away from heat sources and direct sunlight.

Package Contents

Verify that all items listed below are included in your package:

1 x Outdoor Unit (Camera)
1 x Indoor Unit (Monitor)
1 x Power Adapter (US Plug, specific plug type may vary by region)
1 x 5m Connection Cable
3 x Mounting Plates
1 x Bag of Screws
1 x User Manual

LIBO Video Doorbell Intercom System full kit contents including indoor monitor, outdoor camera, power adapter, cables, and mounting hardware.

Figure 1: Complete package contents of the LIBO Video Doorbell Intercom System.

Product Components and Controls

Indoor Monitor (Model: XSL-V70C)

The indoor monitor features a 7-inch TFT-LCD screen for clear viewing and various control buttons.

Diagram of the indoor monitor with labels for power indicator, mute, volume/ringtone adjust, monitor, unlock, talk buttons, color LCD, microphone, and adjustment knobs for light brightness, intercom volume, ringtone volume, and color.

Figure 2: Indoor Monitor (Front and Side View) with labeled controls and adjustment knobs.

Power Indicator: Shows the power status.
Mute: Mutes the ringtone.
Adjust Volume/Ringtone: Adjusts the volume and allows changing the ringtone.
Monitor: Activates the camera to view the outdoor area.
Unlock: Unlocks an electronic door lock (if connected).
Talk: Initiates two-way communication with the outdoor unit.
Color LCD: 7-inch display screen.
Microphone: For audio communication.
Adjust Light Brightness: Knob to control screen brightness.
Adjust Intercom Volume: Knob to control intercom audio volume.
Adjust Ringtone Volume: Knob to control ringtone volume.
Adjust Color: Knob to adjust screen color.

Outdoor Camera (Model: XSL-L)

The outdoor camera unit is designed for outdoor use with waterproof and dustproof features.

Diagram of the outdoor camera unit with labels for camera lens, LED lights, microphone, speaker, and doorbell button.

Figure 3: Outdoor Camera Unit with labeled components.

Camera Lens: CMOS camera for video capture.
LED Night: 5 infrared LEDs for night vision.
Microphone (MIC): For audio input from outside.
Speaker: For audio output to outside.
Doorbell Button: Activates the indoor monitor and ringtone.
Working Indicator Light: Indicates operational status.

Outdoor unit with rain cover and rubber gasket ring, showing IP54 weatherproof rating and operation temperature range.

Figure 4: Outdoor unit showing IP54 weatherproof rating and rain cover.

Installation Guide

This system uses a 4-wire connection. Ensure all connections are secure before powering on the device.

1. Mounting the Units

Indoor Monitor: Mount the indoor monitor on a wall using the provided mounting plate and screws. Ensure it is at a convenient height for viewing and operation.
Outdoor Camera: The outdoor camera is designed for wall mounting. It comes with a weatherproof cover.
Figure 5: Weatherproof box and installation methods for the outdoor unit.

Position the outdoor unit at a height that allows visitors' faces to be clearly visible. Secure the weatherproof cover and the unit to the wall using the provided screws.

2. Wiring Connection

The system requires a 4-core RVV line for connection between the indoor monitor and the outdoor camera. Connect the wires according to the diagram below. If connecting to an electronic lock, ensure proper wiring for the unlock function.

Wiring diagram showing connections between the outdoor station (camera), indoor station (monitor), and power adapter. It illustrates a 4-wire system connection.

Figure 6: Wiring diagram for the LIBO Video Doorbell Intercom System. Note: E-lock is not included.

Connect the 4-core cable from the outdoor unit to the corresponding terminals on the indoor monitor.
Ensure correct polarity for power (DC15V) and signal lines.
If connecting multiple indoor units, use the "Connect to next indoor unit" terminals.
Connect the power adapter to the indoor monitor's DC15V power interface.

3. Power On

Once all wiring is complete and secure, plug the power adapter into a wall outlet. The indoor monitor should power on, indicated by the power indicator light.

Operation Guide

1. Receiving a Call

When a visitor presses the doorbell button on the outdoor unit, the indoor monitor will ring and display the visitor's image.
Press the Talk button to initiate two-way communication.
To end the conversation, press the Talk button again or wait for the call to automatically end after 30 seconds.

2. Monitoring

To view the outdoor area at any time, press the Monitor button on the indoor unit.
The monitor will display the live feed from the outdoor camera for 90 seconds.
Press the Monitor button again to turn off the display.

3. Unlocking the Door

If an electronic lock is connected to the system, press the Unlock button on the indoor monitor to open the door.
Ensure the electronic lock is compatible and correctly wired.

4. Adjusting Settings

Ringtone Volume and Selection: Use the "Adjust the volume of music & replace the ring tone" button/knob on the indoor monitor to change the ringtone and adjust its volume. There are 25 chord ringtones available.
Intercom Volume: Use the "Adjust intercom volume" knob on the side of the indoor monitor.
Screen Brightness and Color: Use the "Adjust light brightness" and "Adjust color" knobs on the side of the indoor monitor to optimize the display.
Mute: Press the Mute button to silence the ringtone.

5. Night Vision

The outdoor camera is equipped with 5 infrared LEDs, providing clear night vision up to 5 meters, ensuring visibility even in low-light conditions.

Maintenance and Care

Cleaning: Use a soft, dry cloth to clean the indoor monitor. For the outdoor unit, a damp cloth can be used to wipe away dirt. Avoid abrasive cleaners or solvents.
Weather Protection: While the outdoor unit is waterproof (IP54 rated) and designed for various weather conditions (-30°C to 60°C), ensure its rain cover is properly installed to maximize longevity.
Cable Inspection: Periodically check all cables for any signs of wear or damage.

Troubleshooting

If you encounter issues with your video doorbell system, please refer to the following common problems and solutions:

Problem	Possible Cause	Solution
No image on indoor monitor.	No power; loose connection; damaged cable.	Check power adapter connection. Ensure all 4-core cables are securely connected. Inspect cables for damage.
No sound during intercom.	Volume too low; microphone/speaker issue; loose connection.	Adjust intercom volume. Check cable connections.
Poor image quality (blurry, distorted).	Dirty camera lens; poor lighting; cable interference.	Clean the camera lens. Adjust screen brightness/color. Ensure cables are not near strong electrical interference.
Doorbell does not ring.	Mute function active; ringtone volume too low; faulty doorbell button.	Deactivate mute. Increase ringtone volume. Check outdoor unit's doorbell button.
Door unlock function not working.	Incorrect wiring to electronic lock; incompatible lock; power issue to lock.	Verify wiring to the electronic lock. Ensure the lock is compatible and receiving power.

If the problem persists after trying these solutions, please contact customer support.

Technical Specifications

Indoor Monitor (Model: XSL-V70C)

Screen: 7-inch TFT-LCD
Resolution: 800x480
Ringtone: 25 Chord
Power Input: AC100V-240V
Power Output: DC15V / 1200mA
Power Consumption: Standby: 1W / Working: 10W
Operating Temperature: -20°C to 60°C (-4°F to 140°F)
Timing: Intercom: 30 seconds; Monitoring: 90 seconds
Video Signal: 1 Vp-P
Wiring: 4 or 5 PIN RVV Line
Installation: Wall-mounted
Dimensions: 240 x 150 x 25mm (L/W/H)
Material: ABS Plastic and Acrylic Panel

Outdoor Camera (Model: XSL-L)

Camera Lens: CMOS
Night LED: 5 Infrared LEDs
Angle: 90 degrees
Night Vision Distance: Visible within 5 meters
Resolution: 700TVL
Power Consumption: Standby: 0W / Working: 2W
Power Supply: Receives power from the monitor
Operating Temperature: -30°C to 60°C (-22°F to 140°F)
Night Version: WLED, Super backlight compensation
Wiring: 4 or 2 PIN RVV Line
Installation: Wall-mounted
Dimensions: 130 x 93 x 30mm (L/W/H)
Material: Plastic & Acrylic Panel with Waterproof Cover
IP Rating: IP54 Weatherproof

General Product Dimensions

Product Dimensions (Overall): 27 x 5.5 x 25 cm
Product Weight (Overall): 1 kg

Warranty and Support

For specific warranty information, please refer to the documentation provided with your purchase or contact the manufacturer, LIBO Smart Home. For return policies and customer service related to your purchase, please consult the retailer where the product was acquired.

For technical support or further assistance, please contact LIBO Smart Home customer service.