1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Joy-it Button-Black-Mini. Please read this manual carefully before using the product to ensure proper functionality and longevity.
2. Product Overview
The Joy-it Button-Black-Mini is a durable and robust micro switch designed as an input device for various single-board computers. It is commonly used in arcade projects and other applications requiring a reliable push-button interface.
Figure 2.1: Top view of the Joy-it Button-Black-Mini. This image displays the smooth, circular black surface of the button, indicating its primary interface for user interaction.
Figure 2.2: Side view of the Joy-it Button-Black-Mini. This perspective highlights the button's cylindrical housing and the integrated tabs designed for secure panel mounting.
Key Features:
- Durable Construction: Built for longevity and robust performance.
- Micro Switch: Ensures reliable and responsive input.
- Wide Compatibility: Suitable for Arduino, Banana Pi, Cubieboard, Raspberry Pi (all models including A+, A, B, B+, 2 B, 3 B).
- Simple Integration: Designed as an input device for single-board computer projects.
3. Setup and Installation
The Joy-it Button-Black-Mini is designed for straightforward integration into your electronic projects. It typically requires connection to the GPIO pins of a compatible single-board computer.
Figure 3.1: Bottom view of the Joy-it Button-Black-Mini. This image reveals the integrated micro switch mechanism and the two electrical terminals for wiring connections.
Installation Steps:
- Prepare Mounting Hole: Ensure your project enclosure or panel has a circular hole with a diameter suitable for the button's base (approximately 27.1 mm).
- Insert Button: Gently push the button into the prepared hole until the mounting tabs snap into place, securing the button.
- Connect Wiring: Identify the two terminals on the underside of the button (as shown in Figure 3.1). These are typically for signal and ground connections. Refer to your single-board computer's documentation for specific wiring diagrams for input devices.
- Test Connection: Before final assembly, perform a basic test to ensure the button registers input correctly with your chosen single-board computer.
Note: The button comes with an integrated micro switch. No external switch components are required.
4. Operating the Button
The Joy-it Button-Black-Mini functions as a momentary push-button switch. When pressed, it completes an electrical circuit, and when released, it breaks the circuit. The specific action triggered by pressing the button depends on the software or circuit design it is integrated into.
Basic Operation:
- To activate the button, apply gentle pressure to its top surface until you feel a click.
- Release the button to return it to its original state.
Ensure your software or microcontroller is programmed to detect the state change (press/release) of the button's connected pin.
5. Maintenance
The Joy-it Button-Black-Mini is designed to be low-maintenance. Follow these guidelines to ensure its longevity:
- Cleaning: Use a soft, dry cloth to wipe the surface of the button. Avoid using abrasive cleaners or solvents, which may damage the plastic.
- Environment: Store and operate the button in a dry environment, away from excessive dust, moisture, and extreme temperatures.
- Physical Stress: Avoid applying excessive force or impact to the button, as this can damage the internal micro switch or the housing.
6. Troubleshooting
If you encounter issues with your Joy-it Button-Black-Mini, consider the following troubleshooting steps:
- Button Not Responding:
- Check all wiring connections to ensure they are secure and correctly connected to the single-board computer's GPIO pins.
- Verify that your software or code is correctly configured to read input from the specific pin the button is connected to.
- Test the button with a multimeter to confirm the micro switch is functioning (completing the circuit when pressed).
- Intermittent Response:
- Ensure connections are not loose.
- Check for any debris or foreign objects that might be obstructing the button's movement or the micro switch.
If problems persist, consult the documentation for your single-board computer or seek assistance from an electronics expert.
7. Specifications
| Attribute | Value |
|---|---|
| Brand | Joy-it |
| Model | Button-Black-Mini |
| Manufacturer | Button-Black-Mini |
| Part Number | Button-Black-Mini |
| Colour | Black |
| Product Dimensions (Height) | 33.86 mm |
| Product Dimensions (Width) | 23.5 mm |
| Base Diameter | 27.1 mm |
| Cross Diameter | 23.5 mm |
| Total Height | 33.9 mm |
| Transition Height | 27.5 mm |
| Accessory Type | Input Device (for single-board computers) |
| Batteries Included | No |
| Batteries Required | No |
| ASIN | B07C7FLVV7 |
| Date First Available | 23 April 2018 |
8. Warranty Information
Joy-it products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the official Joy-it website or contact your point of purchase. Keep your proof of purchase for any warranty claims.
9. Customer Support
For technical assistance, product inquiries, or support, please contact your retailer or the manufacturer directly. You may also find additional resources and FAQs on the official Joy-it website.
Figure 9.1: Joy-it brand logo. This image displays the official logo of the manufacturer, Joy-it.
